Intel Core 2 Duo E8500 45nm CPU Overclocking - Wolfdale

[Apoptosis]

Got my hands on an Intel Core 2 Duo E8500 processor, which is the fastest 45nm dual-core processor that Intel has on the market today.

intel_e8500_cpu.jpg (28.92 KiB) Viewed 5743 times

I have been playing around with it on an ASUS P5E3 Deluxe motherboard and the results have been impressive so far.

Stock Clock Frequencies

intel_e8500_load.jpg (50.69 KiB) Viewed 5746 times

At stock speeds the processor runs 333MHz with a 9.5 multiplier to reach the standard clock of 3.16GHz.

400MHz FSB

intel_e8500_400fsb.jpg (50.62 KiB) Viewed 5745 times

Just for fun I went into the BIOS and increased the front side bus from 333MHz to 400MHz while not touching a single other setting and the system rebooted and was running 3.6GHz at 400MHz FSB! The computer was 100% stable and no extra voltage was needed.

1.45V with 500Mhz FSB

intel_e8500_500fsb.jpg (50.57 KiB) Viewed 5739 times

Not happy with just that I cranked up the Vcore to 1.45V and was able to reach 500MHz FSB with little effort. The processor was now running 4.5GHz with full stability! The processor still has more left in it as there are no errors and it's fully stable. More to come.

[stopthekilling77]

HOT DAMN.

that is unreal!

[Bio-Hazard]

Yup, those things clock like crazy from what I've been seeing around the net..............

[martini161]

screw my q6600 im gettin me one a those. hopefully even my board will be able to get these clocked high

[ibleet]

That CPU is beastly! Its hard to believe the overclocking headroom in the newer Intel chips...Go Intel!

[vbironchef]

Do you think the quad will do the same? If not, I'm thinking about it. I was going to wait for intel to lose the fsb, so I wouldn't have to buy another motherboard for the next upgrade. But, those o.c. speeds are impressive! What would you do?

[Apoptosis]

Had to bump up the voltage to 1.525V, but I was able to hit 515MHz FSB:

intel_e8500_515fsb.jpg (35.94 KiB) Viewed 5652 times

I then cranked up the voltage to 1.55V and hit 526MHz... Now I have conference calls to attend, so I need to take a break.

intel_e8500_526fsb.jpg (35.93 KiB) Viewed 5745 times

[pastorjay]

Hehe! Sweet!

[DMB2000uk]

I know you are just basically suiciding this chip right now, but dont forget that the manufacturing shrink means that 1.5v on a 45mn is basically the same as 1.6v on the 65nm's.

There are reports of 'high' voltage degrading the maximum stable overclocks of the 45nm's. It's too early for it to be conclusive, but this thread on XtremeSystems has about 8/9 reported cases.

Otherwise Happy overclocking!

Dan

[Apoptosis]

nope, I actually read that thread the other day. Drive it like you stole it! ;)

[Apoptosis]

oh and I just wanted to say all that overclocking was with 4x 1GB Corsair 1800MHz DDR3 memory modules installed. ;)

[Bio-Hazard]

LOL.....he's not running high volts.........;) anything under 1.6 is golden as they say................

[Methious]

Darn sweet OC, you know your making the Low end Quad High end Dual decision harder for me.

[Apoptosis]

what quad-core you looking at getting?

[vbironchef]

The fastest quad core intel processor that is coming out. Would like to get 1600 fsb. If that is possible.

[martini161]

you running the ram linked or unlinked? and have you tried running super pi on that yet?

[eva2000]

nice .. trying to read the batch date on IHS is that Q742A??? ?

[ahmetozkangil]

Q series are kings of 3DMark06, but E series just get high MHzs and low Super Pi (with 6 MB L2) I have both Q6600 and E8400 and would like to have a QX9xxx instead of this little pigz

[ahmetozkangil]

Apoptosis, you should get amazing super pi scores with your new CPU...
I would love to see some under 10K, i bet u hit 9.500 or lower... may be 9.400 or so what...