Temperature on 8800gt

[skylire]

Is it normal temp for my 8800gt 80C beacause it does not crash on games, is it made to run that hot(in the room is hot too)

[Major_A]

The temperature is fine. If you are worried about it and don't mind added noise download EVGA's Precision software and turn up the fan's speed.
http://downloads.guru3d.com/EVGA-Precis ... -2251.html

[skylire]

Thanks i have a tool that controls the fan but it is automatic right.I just wondered how it is 80C and does not crash or skip frames

[camaroguy1998]

80C is not to bad for a 8800 running a load.
I have an 8800GTX and when it gets in the upper 80's I give it a rest but, thats not very often!
I run my fan around 65% trying to keep it cool and quiet at the same time!
Mine does duty as a GPU Folder and its usually right around 80c, @ Idle it will drop to the upper 50's.
I use EVGA's Precision also....You can manually control the fan or set it to auto, whatever is best for you!

[werty316]

80 is way too high for my liking.

My 8800GT never goes over 65 when fully loaded. Replacing the stock TIM with better stuff helped alot.

[skier]

i've had each of my GSO's above 110C before for various reasons(fan was hung up on a spare wire for HDaudio, TVtuner blocked air flow entirely(got to 112 for almost two days straight folding), fan got unplugged once) G92 cards can handle the heat no prob

[ibleet]

80 is way too high for my liking.

I agree with this post! 80c may be a safe temp, but I wasn't satisfied with it being that hot. I feel as though running consistently at that temp may shorten the life of the card.

I have an xfx 8800GT which ran hot (~80c at load). The card was already loud so increasing the fan speed wasn't an option. Also note that my card came with a 2-pin fan header, which does not allow for changes in fan speed (tried using rivatuner). So I picked up a Zalman ZF900, the temp dropped over 15c and I have been a happy camper ever since. Amazing difference and well worth the cash.

[Athlonite]

as mentioned above replacing the stock TIM (thermal interface material) with some good quality arctic silver 5 or the like will do an amazing job of lowering temps infact thats the first thing i do when i buy any hardware with an HSF on a chip pull it off and replace the tim on all of them also make sure you have plenty of airflow through your case as there's nothing worse for temps than a stuffy case

[Evasion]

Whoa, my sinlge XFX 9600 GSO runs 40C load haha, and 30C idle.