I recently purchased a Crosshair IV Formula MB and a Phenom II X6 1090T CPU.
Everytime I boot the machine, I am greeted with the message:
- New Cpu Installed! Please enter setup to configure your system
I have tried updating the bios to the latest, clearing the CMOS and reseating the CPU.
Has anyone experienced an issue like this or have any suggestions??
- ASUS Crosshair IV Formula
- AMD Phenom II X6 1090T - G.SKILL Ripjaws Series 8GB (2 x 4GB)
- CORSAIR CMPSU-750TX 750W
- Windows 7 64 Ultimate
"new cpu installed" repeat message on every boot
4 posts
• Page 1 of 1
"new cpu installed" repeat message on every boot
by budoops » Mon Dec 06, 2010 8:34 pm
- budoops
- Legit Little One
- Posts: 1
- Joined: Mon Dec 06, 2010 8:30 pm
Re: "new cpu installed" repeat message on every boot
by Major_A » Sat Feb 12, 2011 10:37 am
https://vip.asus.com/forum/view.aspx?bo ... uage=en-us
If that doesn't help try reading through ASUS' forums and see if you get a better answer. If not try contacting their support.
If that doesn't help try reading through ASUS' forums and see if you get a better answer. If not try contacting their support.
-
Major_A - Legit Extremist
- Posts: 3616
- Joined: Tue May 15, 2007 2:11 pm
- Location: Houston, TX
Re: "new cpu installed" repeat message on every boot
by skier » Sat Feb 12, 2011 2:43 pm
normally that message goes away after you change a setting in BIOS, or by replacing the CR 2032 CMOS battery
-Austin
Twitter
not-so-crappy 775 System:
Q8400 @ 3.8GHz 1.37v 24/7 - GA-EP45-UD3R v1.1 F12 - 4GB (2x2) OCZ Reaper HPC DDR2 1066 CL5 2.1v
EVGA GTX460 1GB 815/1950, w/ ACER 23" 1920x1080 TV & Dell UltraSharp 20" 1600x1200
In Progress: ThermalTake Armor A90 chassis function modded, 2x4GB GSKILL RipjawsX DDR3 2133 CL9, Corsair HX-750w
Remaining: Board / CPU / other 2x4GB CL9 ripjaws kit / GPU upgrade
not-so-crappy 775 System:
Q8400 @ 3.8GHz 1.37v 24/7 - GA-EP45-UD3R v1.1 F12 - 4GB (2x2) OCZ Reaper HPC DDR2 1066 CL5 2.1v
EVGA GTX460 1GB 815/1950, w/ ACER 23" 1920x1080 TV & Dell UltraSharp 20" 1600x1200
In Progress: ThermalTake Armor A90 chassis function modded, 2x4GB GSKILL RipjawsX DDR3 2133 CL9, Corsair HX-750w
Remaining: Board / CPU / other 2x4GB CL9 ripjaws kit / GPU upgrade
-
skier - Moderator
- Posts: 4545
- Joined: Mon Mar 26, 2007 3:29 pm
- Location: Maine
Re: "new cpu installed" repeat message on every boot
by lordvic » Sun Feb 13, 2011 1:03 am
I've owned my Crosshair IV Formula Mobo & PhenomII 1090T for almost 2 months and I haven't updated the BIOS yet (running BIOS 1005). I've seen that message only once or twice when I just put my rig together...and I stopped seeing it after adjusting some BIOS settings.
Do a simply BIOS setting change like change your RAM to run at 1600MHz (if you bought G.Skill's 1600MHz RAM) and see if the message disappears.
Do a simply BIOS setting change like change your RAM to run at 1600MHz (if you bought G.Skill's 1600MHz RAM) and see if the message disappears.
Cooler Master HAF 932//PhenomII 1090T @ 4.1GHz//ASUS Crosshair V Formula//Thermaltake Frio CPU Cooler// Sapphire Dual-X HD 7970 (OC'ing software being dumb) //8GB (2X4GB) G.Skill RipJaws DDR3 1600 @1600 8-9-8-21-1T//Corsair TX850//WD Caviar Black 1TB//Corsair ForceGT 120GB SSD// Kingston 200 V+ 120GB SSD // LiteON DVD-RW w/ Lightscribe//Windows 7 Ult. 64-bit
-
lordvic - Legit Extremist
- Posts: 340
- Joined: Sun Jul 12, 2009 3:00 am
- Location: Victoria, BC, Canada
4 posts
• Page 1 of 1
Return to AMD Motherboard Forum
Who is online
Users browsing this forum: No registered users and 0 guests