So I finally have all my parts and I'm ready to begin construction! I created this thread to be my build log.PARTS LISTCASE AND COOLING
Corsair 700D w/ Side Window
NZXT Sentry LX Fan Controller
3 x Yate Loon 120mm High Speed Fans w/ Red LED's
2 x Yate Loon 140mm High Speed Fans w/ Red LED's
Swiftech MCR320-QP Triple Radiator
Swiftech Apogee GTZ CPU Waterblock
Swiftech MCP-655 Pump
Feser One F1 Coolent
eVGA Frostbite Thermal Paste
10' PrimoChill Tubing (1/2" ID, 3/4" OD) Red UV Reactive
10 x Danger Den Red Hose ClampsCOMPUTER PARTS
Intel i5 2500k Processor
eVGA Z68 FTW Motherboard
eVGA GTX 570 Superclocked GPU
16GB G.SKILL Ripjaws X Series (4 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600
Creative Labs X-Fi Titanium
OCZ Agility 3 120GB SATA III SSD
2 X Wester Digital Caviar Black 640GB WD6401AALS Drive in RAID 0
Lite OnLH-20A1L05 SATA DVD-R/W
Corsair HX620 Modular Power Supply
I started by disassembling Warmachine 2.0 from it's Antec 1200 case.
I ended up being able to remove the entire water cooling loop as one piece thanks to the large case opening in the front.
My workshop is now completely strewn with the parts from the old machine!
Using advice from bubba I cleaned out all the parts for the new loop - radiator, pump, and waterblock - with a mixture of 1:1 distilled white vinegar and distilled water. I made sure to rinse using only distilled water and did so thoroughly. The parts are now drying in my kitchen, awaiting installation tomorrow.