Here it is!!!!
Great case. My temps are 34/30C stable. Runs much quieter than it did externally. I used 7.5 ft of tygon tubing, a little extra, but this way I can move things around and replace parts as needed. One part that you can't see in the pics is the case door, to which I mounted a 80mm panaflo that blows directly on the board. I guess initially at least these cases won't include the crossblow fan, you have to buy it seperately.
As to the cooling kit. Danger Den finally sent me the nozzle kit, looks neat but they sent me the wrong one, I got the kit for the RBX block instead of the TDX block. Their W/C kits include "reusable" clasps, don't use these, use simple zip ties, I found that the clasps, if used more than once, don't tighten all the way, and sometimes slip off their teeth sideways....which can be a very bad thing. I also recommend that if you are using their NB block, that you invest in some neoprene pads to protect the chipset, they should include this in the kit. I had to mod the clips that hold the NB block on, they tend to slip off and shoot several feet, which can be a bad thing as well. I just cut a small groove in the clip head so it would grab the 478 hooks better.
Last edited by capper5016
on Wed Jun 30, 2004 8:45 pm, edited 10 times in total.