Search found 1012 matches

by DJ Tucker
Tue Feb 28, 2017 2:26 pm
Forum: General Computer Forum
Topic: Please Don't Hate!
Replies: 14
Views: 385

Re: Please Don't Hate!

so I went to my local hardware store and I had no luck at all. They had the right size but the thread was to long and the o ring didn't reach. therefore it would of leaked. I got lucky in finding a black right angle though. That fitted beautifully and would of worked a charm but shame about the shor...
by DJ Tucker
Sat Feb 25, 2017 7:06 pm
Forum: General Computer Forum
Topic: Please Don't Hate!
Replies: 14
Views: 385

Re: Please Don't Hate!

Tbh I think that's pretty much what I am going to have to do. ghetto modding at its finest :) the hotdog idea is a nice touch. there's a van just outside my local hardware store :lol:
by DJ Tucker
Fri Feb 24, 2017 11:21 am
Forum: General Computer Forum
Topic: Please Don't Hate!
Replies: 14
Views: 385

Re: Please Don't Hate!

i have already contacted them twice and its been 6 days since my last message and nothing. I took them apart to have a look to see what was underneath. it simply has a tube the connects to the barbed fitting and a screw that goes onto the thread and tightens over the tube just as a hose fastener :)
by DJ Tucker
Thu Feb 23, 2017 8:36 am
Forum: General Computer Forum
Topic: Please Don't Hate!
Replies: 14
Views: 385

Re: Please Don't Hate!

20170223_141159_800x450.jpg
20170223_141159_800x450.jpg (234.65 KiB) Viewed 129 times

This is a picture of my fittings. As you can see it's barbed but has a threaded bottom. I am looking for a right angle or even a 60 degree fitting to screw on to the thread with a barbed end. If not a barbed end something that I can screw a barbed fitting into :)
by DJ Tucker
Wed Feb 22, 2017 12:02 pm
Forum: General Computer Forum
Topic: Please Don't Hate!
Replies: 14
Views: 385

Re: Please Don't Hate!

shame they not around now. I live in the uk so scan or overclockers uk is the only real places to go.
by DJ Tucker
Tue Feb 21, 2017 8:33 am
Forum: General Computer Forum
Topic: Please Don't Hate!
Replies: 14
Views: 385

Re: Please Don't Hate!

i would rather buy them online for aesthetics. could you point me in the direction of the correct part I need to connect a right angled fitting to a barbed fitting with a barbed fitting on the end of that right angle. if not, a right angled fitting that again screws over a barbed fitting with a thre...
by DJ Tucker
Mon Feb 20, 2017 7:37 am
Forum: General Computer Forum
Topic: Please Don't Hate!
Replies: 14
Views: 385

Re: Please Don't Hate!

well what it seems I need now is a new fitting. I need a 13mm OD/10mm ID right angle fitting that I can screw over the current barbed fitting from the res/pump with a barbed end of that right angled fitting that I can either hose clamp or preferably screw tight?
by DJ Tucker
Sun Feb 19, 2017 8:30 am
Forum: General Computer Forum
Topic: Please Don't Hate!
Replies: 14
Views: 385

Re: Please Don't Hate!

can anyone help with what i need?
by DJ Tucker
Tue Feb 14, 2017 8:40 pm
Forum: General Computer Forum
Topic: Please Don't Hate!
Replies: 14
Views: 385

Please Don't Hate!

I went ahead and got me a new desk but not any old desk. The Lian Li DK-Q2X. Got it all setup and until the Lepa Exllusion 240 didn't fit as with the tubing, it was too tall. So here is my question. Where in the UK can I get a 90 degree fittings connecting to the cpu block/res with some clear tubing...
by DJ Tucker
Thu Feb 09, 2017 6:07 pm
Forum: General Computer Forum
Topic: AOC G2460VQ6 Dying?
Replies: 3
Views: 203

Re: AOC G2460VQ6 Dying?

well after testing the monitor on another pc I had the same issue. I then decided to try a hdmi cable instead of the display port I was using and that worked great. after checking the display port cable I turn out I had a bent head. tried another display port cable and all works fine at last. I now ...
by DJ Tucker
Tue Feb 07, 2017 5:36 pm
Forum: General Computer Forum
Topic: AOC G2460VQ6 Dying?
Replies: 3
Views: 203

AOC G2460VQ6 Dying?

So my lcd as stated in the title maybe dying. had it a month and randomly it has started to make a several loud click sounds for a minute or so then stop. randomly will start again at any random time within the next 15-30 minutes. what occurs with the clicking is the monitor checkboards or blacks ou...
by DJ Tucker
Thu Jan 26, 2017 5:21 pm
Forum: Cases, Power Supplies, and Cooling
Topic: Toolless PC cases?
Replies: 1
Views: 640

Re: Toolless PC cases?

tbh most well known brands make tool less cases. nzxt, coolermaster, aerocool and lian li to name a few :)
by DJ Tucker
Thu Jan 26, 2017 5:15 pm
Forum: General Computer Forum
Topic: A little treat for me
Replies: 9
Views: 963

Re: A little treat for me

I personally think it was the Maxwell series as it was the only gpu series I ever had issues on that wasn't my own fault. the only gpu I had issues with was my gtx 580 3gb I had in sli. one overclocked to 850/2000 the other 850/1800. however memory speed matched in evga precision and the other 850/1...
by DJ Tucker
Sun Jan 22, 2017 6:00 pm
Forum: General Computer Forum
Topic: A little treat for me
Replies: 9
Views: 963

Re: A little treat for me

well it turns out overclockers uk and asus are doing the rma based on my original purchase of the inno3d gtx 980. so I would of got I gtx 1080 if it had been a 980 ti I had purchased. instead I have got the asus dual gtx 1070 that I am installing as I write this. its a shame as the performance is ar...
by DJ Tucker
Sat Jan 14, 2017 9:27 pm
Forum: General Computer Forum
Topic: A little treat for me
Replies: 9
Views: 963

Re: A little treat for me

it was a b grade stock from overclockers uk that honoured the warranty due to it being an in place upgrade from my original inno3d gtx 980 that wasn't in stock. sending me a b grade stock meant I lost my warranty after 90 days. I have had this card 98 days and it dies on me. they said they can retur...
by DJ Tucker
Thu Jan 12, 2017 6:14 pm
Forum: General Computer Forum
Topic: A little treat for me
Replies: 9
Views: 963

Re: A little treat for me

anyone have any idea if asus would be able to repair a gtx 980 ti that no longer can be detected in bios or device manager? many have said the card is no longer being manufactured and they would simply replace the card with a 1070 or 1080 depending on how generous they are. if that would be the case...
by DJ Tucker
Mon Jan 09, 2017 7:33 am
Forum: OFF Topic (ie: nothing about computers)
Topic: Will be away for a while.
Replies: 7
Views: 638

Re: Will be away for a while.

well i'm back now we got our daughter into a routine :) You duct taped her to a wall didn't you? LOL Welcome back. Haha. this is so tempting lol. cheers. well i'm back now we got our daughter into a routine :) Are you sure its not the other way around? She has you working to her schedule? :lol: Yep...
by DJ Tucker
Sat Jan 07, 2017 5:45 pm
Forum: Cases, Power Supplies, and Cooling
Topic: How to test pc case?
Replies: 3
Views: 189

Re: How to test pc case?

as already said, give it a good clean. even if you have to use cleaning products. just leave it out to dry for 24-48hrs and you should be good to go :)
by DJ Tucker
Sat Jan 07, 2017 5:41 pm
Forum: Legit Reviews Review Forum
Topic: Gigabyte Aorus Z270X-Gaming 9 Motherboard Review
Replies: 9
Views: 600

Re: Gigabyte Aorus Z270X-Gaming 9 Motherboard Review

I didn't see the price tag at first but wow that's expensive. think I will be passing on this lol.
by DJ Tucker
Sat Jan 07, 2017 10:17 am
Forum: OFF Topic (ie: nothing about computers)
Topic: Will be away for a while.
Replies: 7
Views: 638

Re: Will be away for a while.

well i'm back now we got our daughter into a routine :)

Go to advanced search