zalman 9900max?

This is the place to discuss the latest computer hardware issues and technology. Please keep the discussion ON TOPIC!
Post Reply
User avatar
DJ Tucker
Legit Extremist
Legit Extremist
Posts: 1502
Joined: Tue Dec 30, 2008 11:52 am
Location: Hardbase Headquaters
Contact:

zalman 9900max?

Post by DJ Tucker »

so I have the zalman 9900max but the original bracket that came with it is a nightmare to install. it fits but just would not go on easy. took me 30 minutes just to get it on. however, I have been looking around to see if my old cs5b bracket from zalman (which I have from my old system) would work on my cpu and board? zalman have yet to get back to me and it's been a week. any help would be appreciated :)
MSI Z590 Gaming Edge Wifi
Core i7 10700KF 5Ghz @ 1.25v With Alphacool Eisblock XPX Aurora Edge
Gigabyte RTX 2080 Super 1980Mhz @ 0.925v With TechN GPU Block
32Gb Corsair Vengeance RGB Pro 3600Mhz 16-18-18-38
Aqua Computer Ultitube 200 Pro D5 Next
Corsair XR5 240mm x2 & 360mm
Intel 670p 2Tb & WD Blue M.2 2Tb
Corsair HX1000i
Philips Momentum 3000 24" (Main) & MSI Optix G241V E2 (Second)
Lian Li O11D
Roccat Vulcan 120 Aimo, Roccat Kone Aimo Remastered and Roccat Sym Pro Air
DragonFury
Legit Extremist
Legit Extremist
Posts: 605
Joined: Mon Jan 31, 2011 11:51 am

Re: zalman 9900max?

Post by DragonFury »

I ended up turning the black lower bracket into studs and then use thumb nuts. Those coolers are great, but nightmare to install on intel based machines.
Mini ME
Is in a state of flux....
User avatar
DJ Tucker
Legit Extremist
Legit Extremist
Posts: 1502
Joined: Tue Dec 30, 2008 11:52 am
Location: Hardbase Headquaters
Contact:

Re: zalman 9900max?

Post by DJ Tucker »

Not a bad idea but that's too much hassle for me lol. I have tried looking on google for an insite as to whether the bracket will fit or not. it seems compatible but really not sure if I want to risk it. My cooler is not listed under the supported coolers for that bracket but everything else they do is :( also my bracket from the 9500 cooler was design before 1155 socket came out. back in 2008. would the new cs5b bracket be different?
MSI Z590 Gaming Edge Wifi
Core i7 10700KF 5Ghz @ 1.25v With Alphacool Eisblock XPX Aurora Edge
Gigabyte RTX 2080 Super 1980Mhz @ 0.925v With TechN GPU Block
32Gb Corsair Vengeance RGB Pro 3600Mhz 16-18-18-38
Aqua Computer Ultitube 200 Pro D5 Next
Corsair XR5 240mm x2 & 360mm
Intel 670p 2Tb & WD Blue M.2 2Tb
Corsair HX1000i
Philips Momentum 3000 24" (Main) & MSI Optix G241V E2 (Second)
Lian Li O11D
Roccat Vulcan 120 Aimo, Roccat Kone Aimo Remastered and Roccat Sym Pro Air
User avatar
Major_A
Legit Extremist
Legit Extremist
Posts: 3793
Joined: Tue May 15, 2007 2:11 pm
Location: Houston, TX

Re: zalman 9900max?

Post by Major_A »

Socket 755 and in your case 1155 have different mounting hole locations. So in short it probably won't work out of the box.
User avatar
DJ Tucker
Legit Extremist
Legit Extremist
Posts: 1502
Joined: Tue Dec 30, 2008 11:52 am
Location: Hardbase Headquaters
Contact:

Re: zalman 9900max?

Post by DJ Tucker »

had a feeling that would be the case. I was just concerned of my temps and wanted to re-apply the paste but the bracket is so hard to install. so I won't be changing it any time soon unless I can find the cs5b 1155 version bracket anywhere. full load 60c on core 2 and 3. 56c on core 1 and 52c on core 4 ok?
MSI Z590 Gaming Edge Wifi
Core i7 10700KF 5Ghz @ 1.25v With Alphacool Eisblock XPX Aurora Edge
Gigabyte RTX 2080 Super 1980Mhz @ 0.925v With TechN GPU Block
32Gb Corsair Vengeance RGB Pro 3600Mhz 16-18-18-38
Aqua Computer Ultitube 200 Pro D5 Next
Corsair XR5 240mm x2 & 360mm
Intel 670p 2Tb & WD Blue M.2 2Tb
Corsair HX1000i
Philips Momentum 3000 24" (Main) & MSI Optix G241V E2 (Second)
Lian Li O11D
Roccat Vulcan 120 Aimo, Roccat Kone Aimo Remastered and Roccat Sym Pro Air
User avatar
Major_A
Legit Extremist
Legit Extremist
Posts: 3793
Joined: Tue May 15, 2007 2:11 pm
Location: Houston, TX

Re: zalman 9900max?

Post by Major_A »

That's damn good. Keep it under 80 degrees and call it a day. My old AiO water cooling loop would hit mid to upper 80s, hence why it swapped it with a Phanteks cooler.

*EDIT*
Those are overclocked temps, correct? What program are you using to stress the cores?
User avatar
DJ Tucker
Legit Extremist
Legit Extremist
Posts: 1502
Joined: Tue Dec 30, 2008 11:52 am
Location: Hardbase Headquaters
Contact:

Re: zalman 9900max?

Post by DJ Tucker »

yes they are overclocked temps. that was using 3dmark vantage cpu test 1 and continuous loop. but with occt linpack using 90% of available memory I get core 2 and 3 68c core 1 64c and core 4 62c
MSI Z590 Gaming Edge Wifi
Core i7 10700KF 5Ghz @ 1.25v With Alphacool Eisblock XPX Aurora Edge
Gigabyte RTX 2080 Super 1980Mhz @ 0.925v With TechN GPU Block
32Gb Corsair Vengeance RGB Pro 3600Mhz 16-18-18-38
Aqua Computer Ultitube 200 Pro D5 Next
Corsair XR5 240mm x2 & 360mm
Intel 670p 2Tb & WD Blue M.2 2Tb
Corsair HX1000i
Philips Momentum 3000 24" (Main) & MSI Optix G241V E2 (Second)
Lian Li O11D
Roccat Vulcan 120 Aimo, Roccat Kone Aimo Remastered and Roccat Sym Pro Air
User avatar
Major_A
Legit Extremist
Legit Extremist
Posts: 3793
Joined: Tue May 15, 2007 2:11 pm
Location: Houston, TX

Re: zalman 9900max?

Post by Major_A »

Your temps are fine, no need to reapply the paste.
User avatar
DJ Tucker
Legit Extremist
Legit Extremist
Posts: 1502
Joined: Tue Dec 30, 2008 11:52 am
Location: Hardbase Headquaters
Contact:

Re: zalman 9900max?

Post by DJ Tucker »

that's reassuring thanks major :)
MSI Z590 Gaming Edge Wifi
Core i7 10700KF 5Ghz @ 1.25v With Alphacool Eisblock XPX Aurora Edge
Gigabyte RTX 2080 Super 1980Mhz @ 0.925v With TechN GPU Block
32Gb Corsair Vengeance RGB Pro 3600Mhz 16-18-18-38
Aqua Computer Ultitube 200 Pro D5 Next
Corsair XR5 240mm x2 & 360mm
Intel 670p 2Tb & WD Blue M.2 2Tb
Corsair HX1000i
Philips Momentum 3000 24" (Main) & MSI Optix G241V E2 (Second)
Lian Li O11D
Roccat Vulcan 120 Aimo, Roccat Kone Aimo Remastered and Roccat Sym Pro Air
Post Reply