So as the title says, I have one of there 24 pin extenders. Been using it about 6 months and only noticed last week after having random shutdowns during gaming and even on YouTube. Found out that hwinfo was reporting +12v rail as 11-11.3v only when gpu was under load. if cpu was under load it would drop from 11.8v to 11.6v. I decided to disconnect the 24 pin and test with a DMM and got 11.8v at idle then tested it via a 4 pin Molex while system was under load and got the same results that hwinfo was giving me. Impressed with hwinfo +12v accuracy.
So I disconnected the 24 pin extender and suddenly my +12v was getting 12.05v idle and 11.7v load. Is it possible for a high-end 24 pin extender to cause such a drop in voltage that caused my system to shutdown, guessing due to low +12v?
Shakmods 24 pin extender voltage issues.
- DJ Tucker
- Legit Extremist
- Posts: 1502
- Joined: Tue Dec 30, 2008 11:52 am
- Location: Hardbase Headquaters
- Contact:
Shakmods 24 pin extender voltage issues.
MSI Z590 Gaming Edge Wifi
Core i7 10700KF 5Ghz @ 1.25v With Alphacool Eisblock XPX Aurora Edge
Gigabyte RTX 2080 Super 1980Mhz @ 0.925v With TechN GPU Block
32Gb Corsair Vengeance RGB Pro 3600Mhz 16-18-18-38
Aqua Computer Ultitube 200 Pro D5 Next
Corsair XR5 240mm x2 & 360mm
Intel 670p 2Tb & WD Blue M.2 2Tb
Corsair HX1000i
Philips Momentum 3000 24" (Main) & MSI Optix G241V E2 (Second)
Lian Li O11D
Roccat Vulcan 120 Aimo, Roccat Kone Aimo Remastered and Roccat Sym Pro Air
Core i7 10700KF 5Ghz @ 1.25v With Alphacool Eisblock XPX Aurora Edge
Gigabyte RTX 2080 Super 1980Mhz @ 0.925v With TechN GPU Block
32Gb Corsair Vengeance RGB Pro 3600Mhz 16-18-18-38
Aqua Computer Ultitube 200 Pro D5 Next
Corsair XR5 240mm x2 & 360mm
Intel 670p 2Tb & WD Blue M.2 2Tb
Corsair HX1000i
Philips Momentum 3000 24" (Main) & MSI Optix G241V E2 (Second)
Lian Li O11D
Roccat Vulcan 120 Aimo, Roccat Kone Aimo Remastered and Roccat Sym Pro Air
Re: Shakmods 24 pin extender voltage issues.
I would say yes, since it happened to you
Maybe they have a faulty machine that makes them, maybe it is a bad connection inside one of the holders, maybe one of the wires is not up to spec (maybe all of them if they used cheap wire). Unless someone with knowledge of the connectors and electricity can take one apart and test every single thing, I don't know if it will ever be determined why or how.
you could test each wire to see if the connection is stable between ends. You could also test each wire with voltage running through them if you have a source to supply the clean 12v but be careful as with any electric devices, people do not want to see you get hurt! me, yes, but not you lol
Maybe they have a faulty machine that makes them, maybe it is a bad connection inside one of the holders, maybe one of the wires is not up to spec (maybe all of them if they used cheap wire). Unless someone with knowledge of the connectors and electricity can take one apart and test every single thing, I don't know if it will ever be determined why or how.
you could test each wire to see if the connection is stable between ends. You could also test each wire with voltage running through them if you have a source to supply the clean 12v but be careful as with any electric devices, people do not want to see you get hurt! me, yes, but not you lol
Remember, I am opinionated and nothing I say or do reflects on anyone or anything else but me
- DJ Tucker
- Legit Extremist
- Posts: 1502
- Joined: Tue Dec 30, 2008 11:52 am
- Location: Hardbase Headquaters
- Contact:
Re: Shakmods 24 pin extender voltage issues.
I guess it would be hard but I checked online to see if anyone else has had similar issues to me and nothing, zip, nada. god damn it. shakmod wont even admit to it being an issue at there end as they quote "we only use quality components to insure that vdroop is minimalized". not so sure about that. No refund/exchange either. Had them less than a year and gave proof of order as ebay seller no longer around.
MSI Z590 Gaming Edge Wifi
Core i7 10700KF 5Ghz @ 1.25v With Alphacool Eisblock XPX Aurora Edge
Gigabyte RTX 2080 Super 1980Mhz @ 0.925v With TechN GPU Block
32Gb Corsair Vengeance RGB Pro 3600Mhz 16-18-18-38
Aqua Computer Ultitube 200 Pro D5 Next
Corsair XR5 240mm x2 & 360mm
Intel 670p 2Tb & WD Blue M.2 2Tb
Corsair HX1000i
Philips Momentum 3000 24" (Main) & MSI Optix G241V E2 (Second)
Lian Li O11D
Roccat Vulcan 120 Aimo, Roccat Kone Aimo Remastered and Roccat Sym Pro Air
Core i7 10700KF 5Ghz @ 1.25v With Alphacool Eisblock XPX Aurora Edge
Gigabyte RTX 2080 Super 1980Mhz @ 0.925v With TechN GPU Block
32Gb Corsair Vengeance RGB Pro 3600Mhz 16-18-18-38
Aqua Computer Ultitube 200 Pro D5 Next
Corsair XR5 240mm x2 & 360mm
Intel 670p 2Tb & WD Blue M.2 2Tb
Corsair HX1000i
Philips Momentum 3000 24" (Main) & MSI Optix G241V E2 (Second)
Lian Li O11D
Roccat Vulcan 120 Aimo, Roccat Kone Aimo Remastered and Roccat Sym Pro Air