New Mushkin Memory Heat Spreaders
- gvblake22
- Legit Extremist
- Posts: 1111
- Joined: Thu Feb 17, 2005 9:39 am
- Location: Northern Michigan
- Contact:
NEVER!!!! hahahakenc51 wrote:now get back to work
Slaker....
What does it say on the edge of the PCB?
I think there are only two types of BP PCB's:
B6U808 and B6U815
Also check to see if it is shorter(not as tall) than other sticks (if you have anything to compare it with). The brainpower PCB's are not as tall.
http://www.legitreviews.com/article.php?aid=53
Last edited by gvblake22 on Wed Aug 03, 2005 1:37 pm, edited 1 time in total.
- kenc51
- Legit Extremist
- Posts: 5167
- Joined: Thu Jun 23, 2005 1:56 pm
- Location: Dublin, Republic of Ireland
- Contact:
a square box - inside says A ?????
Brainpower has a "bare" side with a single transistor thingy between each chip. yes?
normally says something like bu808 or something
This has a row of little transistors on both sides, just above the dimm contacts.
ie. not the same as this
http://forums.legitreviews.com/about1159.html
Brainpower has a "bare" side with a single transistor thingy between each chip. yes?
normally says something like bu808 or something
This has a row of little transistors on both sides, just above the dimm contacts.
ie. not the same as this
http://forums.legitreviews.com/about1159.html
- killswitch83
- Legit Extremist
- Posts: 1747
- Joined: Tue Jun 21, 2005 3:45 pm
- Location: South Carolina
That makes me cringe a little, to think that OCZ plats have JEDEC standard PCB's....I hope that doesn't happen to me when I purchase them, though I've not noticed any problems with the standard PCB's, but I've not overclocked memory before either, so I assume it could present a quality problem when overclocking those types, what do you guys think?
- infinitevalence
- Legit Extremist
- Posts: 2841
- Joined: Sat Apr 24, 2004 12:40 pm
- Location: Nashville, TN
- Contact:
- killswitch83
- Legit Extremist
- Posts: 1747
- Joined: Tue Jun 21, 2005 3:45 pm
- Location: South Carolina
- Apoptosis
- Site Admin
- Posts: 33941
- Joined: Sun Oct 05, 2003 8:45 pm
- Location: St. Louis, Missouri
- Contact:
Just got this message & I want a LR forum member to represent and win this contest also.
Greetings Ladies and Gentlemen
I would like to get your help to promote our New Heatsink. We are going to run a contest on our website to get endusers, customers, friends, reviewers to help give a name to our Heatsink. We have started shipping them with our REDLINE memory products. But starting next week, we will start shipping all our memory with the new design.
Please ask your readers, customers, friends and families to enter by submitting their entries to [email protected]. The contest will start Friday, August 19, 2005 and end Friday, August 26, 2005.
The winner will be given, his or her choice of 1gig worth of memory.. ANY 1gig combination... 2x512mb or 1 signle 1gig module.
Thank you for your support. Have a good evening.