How to Install Dual GPU Clients + Dummy Plug Thread

Here you can find out about our Folding Team! Our goal: to understand protein folding, protein aggregation, and related diseases
Post Reply
User avatar
skier
Moderator
Moderator
Posts: 4450
Joined: Mon Mar 26, 2007 3:29 pm
Location: Maine
Contact:

How to Install Dual GPU Clients + Dummy Plug Thread

Post by skier »

we don't really have anything here that goes into dual GPU Folding, and there isnt anything anywhere that has to do with dual GPU on windows 7, so here it is:

1. Download and Run the Installer from the Stanford high performance Clients page, Install to the usual location

2. Create 2 shortcuts to the GPU client .exe onto your desktop(for easy access, shortcuts can be placed anywhere)
Image

3. Go into your Application Data folder and copy/paste the 'Folding@Home-gpu' folder and rename it to something you can distinguish, this folder holds your config/worklog and other misc. files, and is where the actual application will run from

XP----------C:\Documents and Settings\[username]\Application Data\
Vista/7----C:\Users\[username]\AppData\Roaming\
Image

4. Go to the desktop(or where you made the shortcuts) and click on one of the shortcut's properties(GPU0 lets say first), and enter the following: target is where the .exe is, and it starts in the folders created in appdata, whatever you ended up calling them

xp---------Target: "C:\Program Files\Folding@home\Folding@home-gpu\[email protected]" -gpu 0
------------Start in: C:\Documents and Settings\[username]\Application Data\Folding@Home-gpu0
Vista/7---Target: "C:\Program Files\Folding@home\Folding@home-gpu\[email protected]" -gpu 0
------------Start in: C:\Users\[username]\AppData\Roaming\Folding@Home-gpu0

reminder for x64 users, the program files folder for the target will have " (x86)" at the end of it, making it
Target: "C:\Program Files (x86)\Folding@home\Folding@home-gpu\[email protected]" -gpu 0

Image

5. Go to the desktop(or where you made the shortcuts) and click the other shortcut's properties(for GPU1 this time) and do the same:

xp---------Target: "C:\Program Files\Folding@home\Folding@home-gpu\[email protected]" -gpu 1
------------Start in: C:\Documents and Settings\[username]\Application Data\Folding@Home-gpu1
Vista/7---Target: "C:\Program Files\Folding@home\Folding@home-gpu\[email protected]" -gpu 1
------------Start in: C:\Users\[username]\AppData\Roaming\Folding@Home-gpu1

and again for 64bit targets: "C:\Program Files (x86)\Folding@home\Folding@home-gpu\[email protected]" -gpu 1

Image

6. Disable SLI(if enabled) in the nvidia control panel settings; and Extend Desktop to another monitor(an imaginary one likely) you have to disable SLI FIRST
XP---------Control Panel-> Display-> settings-> Display: select secondary-> Check "Extend my Windows Desktop onto this monitor" -> apply-> Ok
Vista------Control Panel-> Display-> Change Display Settings-> Detect-> "Available Display Output..."-> "Try to connect anyway on: VGA"-> Apply-> "Extend these displays"-> Apply-> Keep Changes-> change resolution of extra "output"

Image
Image
Image
Image
Image
Image
Image
Image
Image

7. Start each client for the first time from the shortcuts you made earlier, and fill out the configuration, following those steps here

8. Disable any and ALL power saving options(if you're folding on Dual GPUs you're the kind of user that doesnt need them anyway) because if your computer goes to sleep, it'll hard lock and you'd have to reboot to be able to do anything
xp----------Control Panel-> Power Options-> Settings for Scheme-> Set everything to "Never"
Vista/7----Control Panel-> Hardware and Sound-> Power Options-> High Performance-> Change Plan Settings-> Change Advanced Power Settings
Image

Now for the elusive dummy plug
alright, all you need for the dummy plug is scissors, a DVI-VGA adapter(included in a majority of GPU bundles) and a local radio shack that has a pack of five(5) 68 Ohm Resistors for 99 cents. what the resistors do is fake the plug out into thinking that a monitor is attached. the ones i purchased were 1/2 watt, 5% tolerance

Image

first step is to open the resistor pack, and cut out three(3) resistors

Image

once removed, bend one end of the resistor around and cut to a rough length(doesn't need to be that specific, i don't cut the end that got curled and the following seems to be a good length)(bottom one is cut, top resistor is not)
Image

once cut to length, you will place a resistor in pins 1-6, 2-7, 3-8 as shown below for reference to which pins
Image

you just want to alternate the ends so that the resistor band is touching a wire and so that no two wires can touch(remember, resistors are not like diodes, there is no real right way to placed as far as pos/neg terminals)
Image

slip the plug in the secondary(/thirdary?) card's dvi-out and extend as a monitor as shown above and you're off to races

and Happy Folding :supz:


sources:
[H]ard Forum Multi GPU guide
LR GPU Installation Thread
My hunting around control panel in 7
Last edited by skier on Sun Feb 21, 2010 4:24 pm, edited 4 times in total.
-Austin
Image
Screamin' BCLK: Image
775 System (Overclocking Platform): Q8400/Q8300/E8400/E7400/E7500 - GA-EP45-UD3R v1.1 - 4GB (2x2) OCZ Reaper HPC DDR2 1066 CL5 2.1v Corsair TX-750w
Gamer: Asrock Z77 Extreme4, i7 3770K @4.6GHz, ThermalTake Armor A90 modded, 2x4GB GSKILL RipjawsX DDR3 2133 CL9, Corsair HX-750w, MSI GTX660 Twin Frozr
Server2012: Q9300 - 8GB DDR2 - Asus P5QL Pro - Corsair CX430 - Mirrored 2TB Seagate's with 2TB WD cav for fileshare backups, 1TB WD for OS backups
User avatar
skier
Moderator
Moderator
Posts: 4450
Joined: Mon Mar 26, 2007 3:29 pm
Location: Maine
Contact:

Re: How to Install Dual GPU Clients Thread

Post by skier »

:bump:
-Austin
Image
Screamin' BCLK: Image
775 System (Overclocking Platform): Q8400/Q8300/E8400/E7400/E7500 - GA-EP45-UD3R v1.1 - 4GB (2x2) OCZ Reaper HPC DDR2 1066 CL5 2.1v Corsair TX-750w
Gamer: Asrock Z77 Extreme4, i7 3770K @4.6GHz, ThermalTake Armor A90 modded, 2x4GB GSKILL RipjawsX DDR3 2133 CL9, Corsair HX-750w, MSI GTX660 Twin Frozr
Server2012: Q9300 - 8GB DDR2 - Asus P5QL Pro - Corsair CX430 - Mirrored 2TB Seagate's with 2TB WD cav for fileshare backups, 1TB WD for OS backups
User avatar
InspectahACE
Legit Extremist
Legit Extremist
Posts: 1776
Joined: Tue Sep 06, 2005 8:25 pm
Location: Las Vegas

Re: How to Install Dual GPU Clients Thread

Post by InspectahACE »

I think I found a bug in the nvidia drivers on Windows 7 when enabling the 2nd display/extending it for folding. I can replicate it easily so it must be a bug. When in the control panel and you enable the 2nd display, for some reason it makes the 2nd display the primary screen and will NOT let you switch back even after pressing APPLY. I found out if you disable the primary screen..then re-enable it, it will correct the issue.

this IS how it should be
Image

But if I hit apply as it is in the above pic this happens and will NOT return back(this shot was taken from screen #2)
Image


BUT.....if you disable the #1 screen, then re-enable it, it will return to normal with both screens enabled. Just thought I'd post this in case anyone other than me ran into this
i9-9900k | ASUS Maximus XI Hero | ASUS Strix RTX 2070 Super | 32GB G.Skill Trident RGB DDR4-3600 | Cooler Master ML360L AIO | Seagate Firecuda 510 1TB NVME SSD | Tt ToughPower RGB 850W PSU | Sound Blaster Z | LL PC-O11 Dynamic | ASUS Gladius II Mouse | ASUS Strix Scope RX| ASUS VG259QMM 24" 240hz monitor | Windows 11 Pro
User avatar
Wifuzzy
Legit Extremist
Legit Extremist
Posts: 380
Joined: Wed Aug 23, 2006 8:29 pm

Re: How to Install Dual GPU Clients Thread

Post by Wifuzzy »

So you don't actually need 2 monitors or a dumby plug?
User avatar
skier
Moderator
Moderator
Posts: 4450
Joined: Mon Mar 26, 2007 3:29 pm
Location: Maine
Contact:

Re: How to Install Dual GPU Clients Thread

Post by skier »

it depends on if you have an SLI connector, if you have different cards you need a dummy plug/monitor
-Austin
Image
Screamin' BCLK: Image
775 System (Overclocking Platform): Q8400/Q8300/E8400/E7400/E7500 - GA-EP45-UD3R v1.1 - 4GB (2x2) OCZ Reaper HPC DDR2 1066 CL5 2.1v Corsair TX-750w
Gamer: Asrock Z77 Extreme4, i7 3770K @4.6GHz, ThermalTake Armor A90 modded, 2x4GB GSKILL RipjawsX DDR3 2133 CL9, Corsair HX-750w, MSI GTX660 Twin Frozr
Server2012: Q9300 - 8GB DDR2 - Asus P5QL Pro - Corsair CX430 - Mirrored 2TB Seagate's with 2TB WD cav for fileshare backups, 1TB WD for OS backups
User avatar
Wifuzzy
Legit Extremist
Legit Extremist
Posts: 380
Joined: Wed Aug 23, 2006 8:29 pm

Re: How to Install Dual GPU Clients Thread

Post by Wifuzzy »

....you can mix and match cards? And not use an sli connector?
User avatar
skier
Moderator
Moderator
Posts: 4450
Joined: Mon Mar 26, 2007 3:29 pm
Location: Maine
Contact:

Re: How to Install Dual GPU Clients Thread

Post by skier »

Wifuzzy wrote:....you can mix and match cards? And not use an sli connector?
what do you think physx cards are? haha

i was using a GTS 250 with GT 240 secondary for quite a while. if you have dummy plugs you can use nearly any combination of cards for folding post 8800 series
-Austin
Image
Screamin' BCLK: Image
775 System (Overclocking Platform): Q8400/Q8300/E8400/E7400/E7500 - GA-EP45-UD3R v1.1 - 4GB (2x2) OCZ Reaper HPC DDR2 1066 CL5 2.1v Corsair TX-750w
Gamer: Asrock Z77 Extreme4, i7 3770K @4.6GHz, ThermalTake Armor A90 modded, 2x4GB GSKILL RipjawsX DDR3 2133 CL9, Corsair HX-750w, MSI GTX660 Twin Frozr
Server2012: Q9300 - 8GB DDR2 - Asus P5QL Pro - Corsair CX430 - Mirrored 2TB Seagate's with 2TB WD cav for fileshare backups, 1TB WD for OS backups
User avatar
Wifuzzy
Legit Extremist
Legit Extremist
Posts: 380
Joined: Wed Aug 23, 2006 8:29 pm

Re: How to Install Dual GPU Clients Thread

Post by Wifuzzy »

And I was gonna stay in bed all day, Good thing I didn't...I learned something today. :)

Edit: and for bonus points...think you could do it with 3 cards..?
User avatar
dicecca112
Site Admin
Site Admin
Posts: 5014
Joined: Mon Mar 01, 2004 10:40 am
Contact:

Re: How to Install Dual GPU Clients Thread

Post by dicecca112 »

Can't believe this isn't a sticky, I have rectified that :)
Image
User avatar
skier
Moderator
Moderator
Posts: 4450
Joined: Mon Mar 26, 2007 3:29 pm
Location: Maine
Contact:

Re: How to Install Dual GPU Clients Thread

Post by skier »

Wifuzzy wrote:And I was gonna stay in bed all day, Good thing I didn't...I learned something today. :)

Edit: and for bonus points...think you could do it with 3 cards..?

you can ALWAYS learn something, i know i do.

i dont see why not if you make another dummy plug, i havnt personally done it as i like there to be room between cards but if i had an LGA 775 CPU to fool with(future plans for the DELL, need a case...and a CPU and DDR3 ) i'd try it out
-Austin
Image
Screamin' BCLK: Image
775 System (Overclocking Platform): Q8400/Q8300/E8400/E7400/E7500 - GA-EP45-UD3R v1.1 - 4GB (2x2) OCZ Reaper HPC DDR2 1066 CL5 2.1v Corsair TX-750w
Gamer: Asrock Z77 Extreme4, i7 3770K @4.6GHz, ThermalTake Armor A90 modded, 2x4GB GSKILL RipjawsX DDR3 2133 CL9, Corsair HX-750w, MSI GTX660 Twin Frozr
Server2012: Q9300 - 8GB DDR2 - Asus P5QL Pro - Corsair CX430 - Mirrored 2TB Seagate's with 2TB WD cav for fileshare backups, 1TB WD for OS backups
User avatar
InspectahACE
Legit Extremist
Legit Extremist
Posts: 1776
Joined: Tue Sep 06, 2005 8:25 pm
Location: Las Vegas

Re: How to Install Dual GPU Clients Thread

Post by InspectahACE »

or...if you have a monitor with multiple inputs(hdmi,dvi, vga) and the cables for each, you can hook up each gpu to the monitor that way, and it will see "3" screens. that's how I do it with mine. cept i only have 2 inputs ](*,)..just another way to do it
Last edited by InspectahACE on Sun Feb 21, 2010 3:33 pm, edited 1 time in total.
i9-9900k | ASUS Maximus XI Hero | ASUS Strix RTX 2070 Super | 32GB G.Skill Trident RGB DDR4-3600 | Cooler Master ML360L AIO | Seagate Firecuda 510 1TB NVME SSD | Tt ToughPower RGB 850W PSU | Sound Blaster Z | LL PC-O11 Dynamic | ASUS Gladius II Mouse | ASUS Strix Scope RX| ASUS VG259QMM 24" 240hz monitor | Windows 11 Pro
User avatar
Wifuzzy
Legit Extremist
Legit Extremist
Posts: 380
Joined: Wed Aug 23, 2006 8:29 pm

Re: How to Install Dual GPU Clients Thread

Post by Wifuzzy »

I might as well heep asking questions. I have a Gigabyte P35-ds3p...it is a crossfire board...Think I could put 2 Nvidia cards if 1 has a dumby plug? It might work..there is no sli connector...maybe?
User avatar
skier
Moderator
Moderator
Posts: 4450
Joined: Mon Mar 26, 2007 3:29 pm
Location: Maine
Contact:

Re: How to Install Dual GPU Clients Thread

Post by skier »

yeah it'll work just fine with a dummy plug, i only have one sli board, past three are Crossfire only(one board with 3 PCIe slots, two with two) and i've always had two nvidia cards in folding
-Austin
Image
Screamin' BCLK: Image
775 System (Overclocking Platform): Q8400/Q8300/E8400/E7400/E7500 - GA-EP45-UD3R v1.1 - 4GB (2x2) OCZ Reaper HPC DDR2 1066 CL5 2.1v Corsair TX-750w
Gamer: Asrock Z77 Extreme4, i7 3770K @4.6GHz, ThermalTake Armor A90 modded, 2x4GB GSKILL RipjawsX DDR3 2133 CL9, Corsair HX-750w, MSI GTX660 Twin Frozr
Server2012: Q9300 - 8GB DDR2 - Asus P5QL Pro - Corsair CX430 - Mirrored 2TB Seagate's with 2TB WD cav for fileshare backups, 1TB WD for OS backups
User avatar
skier
Moderator
Moderator
Posts: 4450
Joined: Mon Mar 26, 2007 3:29 pm
Location: Maine
Contact:

Re: How to Install Dual GPU Clients Thread

Post by skier »

dicecca112 wrote:Can't believe this isn't a sticky, I have rectified that :)
after it didnt get stickied after being here for a few weeks i stopped updating it and just bookmarked it for personal use (because i've used this thread every time i've reinstalled an OS) as i figured it was going to the thread graveyard

guess i'll update for 64bit users which is likely most of them because the program folder is differnt
-Austin
Image
Screamin' BCLK: Image
775 System (Overclocking Platform): Q8400/Q8300/E8400/E7400/E7500 - GA-EP45-UD3R v1.1 - 4GB (2x2) OCZ Reaper HPC DDR2 1066 CL5 2.1v Corsair TX-750w
Gamer: Asrock Z77 Extreme4, i7 3770K @4.6GHz, ThermalTake Armor A90 modded, 2x4GB GSKILL RipjawsX DDR3 2133 CL9, Corsair HX-750w, MSI GTX660 Twin Frozr
Server2012: Q9300 - 8GB DDR2 - Asus P5QL Pro - Corsair CX430 - Mirrored 2TB Seagate's with 2TB WD cav for fileshare backups, 1TB WD for OS backups
User avatar
Wifuzzy
Legit Extremist
Legit Extremist
Posts: 380
Joined: Wed Aug 23, 2006 8:29 pm

Re: How to Install Dual GPU Clients Thread

Post by Wifuzzy »

Make it complete with a link for buying/making a dumby plug.
User avatar
skier
Moderator
Moderator
Posts: 4450
Joined: Mon Mar 26, 2007 3:29 pm
Location: Maine
Contact:

Re: How to Install Dual GPU Clients Thread

Post by skier »

Wifuzzy wrote:Make it complete with a link for buying/making a dumby plug.
done deal.
-Austin
Image
Screamin' BCLK: Image
775 System (Overclocking Platform): Q8400/Q8300/E8400/E7400/E7500 - GA-EP45-UD3R v1.1 - 4GB (2x2) OCZ Reaper HPC DDR2 1066 CL5 2.1v Corsair TX-750w
Gamer: Asrock Z77 Extreme4, i7 3770K @4.6GHz, ThermalTake Armor A90 modded, 2x4GB GSKILL RipjawsX DDR3 2133 CL9, Corsair HX-750w, MSI GTX660 Twin Frozr
Server2012: Q9300 - 8GB DDR2 - Asus P5QL Pro - Corsair CX430 - Mirrored 2TB Seagate's with 2TB WD cav for fileshare backups, 1TB WD for OS backups
Post Reply