My computer (work in progress)
Posted: Tue Feb 08, 2011 12:54 pm
This is a mod I been working off and on for a while now, I had to put it off for a while because of life kinda gotten in the way of things (as it always does from time to time). So I decided to pick up where I left off at. But before I went right into the modding I needed to make sure I was on the right track with my chassis. So it looks like hell right now. I have to wait for things to warm up a bit more and get a replacement chassis so I can finally finish it. I will be repainting this chassis once again because after sitting for a while getting kicked around ruined the finish.
The chassis I am modding is my Cosmos 1000.
this is how it is currently. Told ya it looks like hell.
my window mod I done to the chassis, I cut this out with a jigsaw and then filed it into shape.
I did not like the way Cooler Master did the top buttons and the USB ports, so I decided to add my own flair to it. I will be placing the USB ports on the back removable panel.
This is the removable top back panel, I cut out the center of it and will be adding a deflector and a grill in this area.
But I need to add some plexi glass to the inside so I have something to work off of.
The paint I am going to spraying this chassis is going to be 2 colors, but it will be shifting thru 4 different colors. this is looking at the Green/Purple color paint.
the other color I am using is a Blue/Red paint.
My lighting was not allowing the color shift to the other colors .
A quick look at the internals of the chassis. It is a complete mess in there.
Looking at the 6970 video cards with Koolance water blocks. I ran these in parallel with each other. the brass band you see is making sure the two video cards stay together.
The chassis I am modding is my Cosmos 1000.
this is how it is currently. Told ya it looks like hell.
my window mod I done to the chassis, I cut this out with a jigsaw and then filed it into shape.
I did not like the way Cooler Master did the top buttons and the USB ports, so I decided to add my own flair to it. I will be placing the USB ports on the back removable panel.
This is the removable top back panel, I cut out the center of it and will be adding a deflector and a grill in this area.
But I need to add some plexi glass to the inside so I have something to work off of.
The paint I am going to spraying this chassis is going to be 2 colors, but it will be shifting thru 4 different colors. this is looking at the Green/Purple color paint.
the other color I am using is a Blue/Red paint.
My lighting was not allowing the color shift to the other colors .
A quick look at the internals of the chassis. It is a complete mess in there.
Looking at the 6970 video cards with Koolance water blocks. I ran these in parallel with each other. the brass band you see is making sure the two video cards stay together.