New Case

Discuss cases, PSUs, and various cooling techniques in here.
User avatar
Neptune24
Legit Fanatic
Legit Fanatic
Posts: 190
Joined: Mon May 17, 2010 10:28 am
Location: Hampshire, UK

New Case

Postby Neptune24 » Thu Jun 07, 2012 3:35 pm

Hi Guys,

I am wanting to buy a new case. Firstly cause mine is too big for where it is suppose to be and secondly cause I need one with more fan space/better air flow and after having a look on several sites, have found nothing.

Requirements:

Motherboard is: Micro ATX Form Factor; 24.4cm x 24.4cm (not forgetting the graphics card)
One with the cable hiding system.
Filters over the fans (though not essential)
Not fussed on case colour but fan LEDs to be blue or green me thinks
I want it to look good nothing boring but not horrible either.
Not bothered if it comes with or without a PSU
£65 I think is a good price for the right case.
the gap that it is to go in is : H - 410mm W - 300mm D - 460mm
Want one that stands up.
If it helps I currently have a silver xblade tower. Type xblade in google it will come up.

Any suggestions or where else to look (have looked on Amazon Ebuyer and Xcases) welcome

Thank you

Neptune24
Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7600)
Mother Board: Gigabyte GA-880GM-UD2H
BIOS: Award Modular BIOS v6.00PG
Processor: AMD PhenomII X4 965 Processor, 3.4GHz(Stock)
Memory: 16GB RAM
Graphics Card: GeForce GTX 550 Ti Memory: 1024 MB
GPU Driver:
8.17.12.7061
Direct X 11

DragonFury
Legit Extremist
Legit Extremist
Posts: 605
Joined: Mon Jan 31, 2011 11:51 am

Re: New Case

Postby DragonFury » Fri Jun 08, 2012 9:29 pm

have you looked into mATX chassis? Here is a list of them
Mini ME
Is in a state of flux....

User avatar
Neptune24
Legit Fanatic
Legit Fanatic
Posts: 190
Joined: Mon May 17, 2010 10:28 am
Location: Hampshire, UK

Re: New Case

Postby Neptune24 » Tue Jun 12, 2012 10:15 am

Yep have done that though the filters.

I have found a couple of cases that have caught my eye. Just wondering how important a side fan is?? Will it make any difference once the cables are out of the way??

Neptune24
Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7600)
Mother Board: Gigabyte GA-880GM-UD2H
BIOS: Award Modular BIOS v6.00PG
Processor: AMD PhenomII X4 965 Processor, 3.4GHz(Stock)
Memory: 16GB RAM
Graphics Card: GeForce GTX 550 Ti Memory: 1024 MB
GPU Driver:
8.17.12.7061
Direct X 11

DragonFury
Legit Extremist
Legit Extremist
Posts: 605
Joined: Mon Jan 31, 2011 11:51 am

Re: New Case

Postby DragonFury » Tue Jun 12, 2012 10:32 am

it helps out, but not always required.
Mini ME
Is in a state of flux....

pakthedude
Legit Little One
Legit Little One
Posts: 2
Joined: Sat Nov 24, 2007 10:36 am

Re: New Case

Postby pakthedude » Tue Jun 12, 2012 8:19 pm

I will recommend Fractal Design Define Mini

http://www.fractal-design.com/?view=product&prod=58

Image

Image

User avatar
Neptune24
Legit Fanatic
Legit Fanatic
Posts: 190
Joined: Mon May 17, 2010 10:28 am
Location: Hampshire, UK

Re: New Case

Postby Neptune24 » Thu Jun 14, 2012 6:53 am

This is more what I am looking for.

Just needs to look catching and not plain.
Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7600)
Mother Board: Gigabyte GA-880GM-UD2H
BIOS: Award Modular BIOS v6.00PG
Processor: AMD PhenomII X4 965 Processor, 3.4GHz(Stock)
Memory: 16GB RAM
Graphics Card: GeForce GTX 550 Ti Memory: 1024 MB
GPU Driver:
8.17.12.7061
Direct X 11

User avatar
Neptune24
Legit Fanatic
Legit Fanatic
Posts: 190
Joined: Mon May 17, 2010 10:28 am
Location: Hampshire, UK

Re: New Case

Postby Neptune24 » Fri Jun 15, 2012 11:40 am

Ok to help I have done this.

20120615_180545 2.jpg
This is my current set up


As you can see the tower is too big for the gap it is meant to go in and there are two main issues with it where it is.

1. Because of the support board at back of desk, I can't push it all the way back (power cable)

2. Because of point one, I constantly hit the blasted thing cause, like most, I sit at the middle(ish) point of the desk.

I am thinking of getting a new desk but want one similar to this one. Tower space slide out bit (big enough for keyboard and mouse)

Neptune24
Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7600)
Mother Board: Gigabyte GA-880GM-UD2H
BIOS: Award Modular BIOS v6.00PG
Processor: AMD PhenomII X4 965 Processor, 3.4GHz(Stock)
Memory: 16GB RAM
Graphics Card: GeForce GTX 550 Ti Memory: 1024 MB
GPU Driver:
8.17.12.7061
Direct X 11

DragonFury
Legit Extremist
Legit Extremist
Posts: 605
Joined: Mon Jan 31, 2011 11:51 am

Re: New Case

Postby DragonFury » Sat Jun 16, 2012 11:00 am

putting a chassis in an enclosed space not wise.
Mini ME
Is in a state of flux....

User avatar
Neptune24
Legit Fanatic
Legit Fanatic
Posts: 190
Joined: Mon May 17, 2010 10:28 am
Location: Hampshire, UK

Re: New Case

Postby Neptune24 » Sun Jun 17, 2012 1:12 pm

I know that's why I'm looking for a new desk. But surely if the gap is big enough then air would still circulate.

Having said that, I'm all for advice so what sort of desk should I be looking for??

Neptune24
Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7600)
Mother Board: Gigabyte GA-880GM-UD2H
BIOS: Award Modular BIOS v6.00PG
Processor: AMD PhenomII X4 965 Processor, 3.4GHz(Stock)
Memory: 16GB RAM
Graphics Card: GeForce GTX 550 Ti Memory: 1024 MB
GPU Driver:
8.17.12.7061
Direct X 11

User avatar
Neptune24
Legit Fanatic
Legit Fanatic
Posts: 190
Joined: Mon May 17, 2010 10:28 am
Location: Hampshire, UK

Re: New Case

Postby Neptune24 » Mon Jun 18, 2012 6:17 am

Ok I have found a desk that I like and I can also have a decent sized tower as well.

http://www.staples.co.uk/furniture/workstations-desks/mobile-workstations/ohio-workstation-beech?campaign=Criteo&ns_campaign=Criteo&ns_mchannel=Retargeting&ns_source=DR&ns_linkname=392950&ns_fees=0&sec_type=ext&utm_source=Criteo&utm_medium=Retargeting&utm_campaign=392950&utm_term=active

Would this be a more suited desk?

The space for the PC tower measures at

H:560mm, W:250mm, D: Around 450mm-500mm
Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7600)
Mother Board: Gigabyte GA-880GM-UD2H
BIOS: Award Modular BIOS v6.00PG
Processor: AMD PhenomII X4 965 Processor, 3.4GHz(Stock)
Memory: 16GB RAM
Graphics Card: GeForce GTX 550 Ti Memory: 1024 MB
GPU Driver:
8.17.12.7061
Direct X 11

User avatar
DJ Tucker
Legit Extremist
Legit Extremist
Posts: 1052
Joined: Tue Dec 30, 2008 11:52 am
Location: I Live In A 2 Bed Tardis
Contact:

Re: New Case

Postby DJ Tucker » Sat Sep 29, 2012 6:12 am

Definatly wouldn't put a case into a closed space like that. Don't get me wrong, that desk looks good but you'll have very little room for the side fan. In order for a side fan to work properly you need at least 10cm of space between the fan and the wall/desk. Anyway this is the mATX case i would get :)

http://www.amazon.co.uk/Zalman-Z9-Plus- ... 95&sr=1-11
Annihilator V3.0
Processor: Intel Core i7 2600k @ 4.8Ghz @ 1.376v With LEPA Exllusion 240 Mod
Memory: 16Gb Corsair Vengeance Pro 1866Mhz 10-10-10-24-1T
Hard Drive: SanDisk X110 128Gb OS Sandisk X210 512Gb Gaming
Video Card: Inno3d GTX 1070 Black Hybrid 2050/9000 @ 1.094v
Monitor: AOC G2460VQ6
Operating System: Windows 10 64 bit Pro
Motherboard: ASRock Extreme 6 Z77
Case: Lian Li DK-Q2X with Corsair HX1050 PSU

User avatar
Neptune24
Legit Fanatic
Legit Fanatic
Posts: 190
Joined: Mon May 17, 2010 10:28 am
Location: Hampshire, UK

Re: New Case

Postby Neptune24 » Sun Feb 03, 2013 12:36 pm

Ok so after a lot (and I looked at well over 200 cases) I have found and ordered a new PC case.

http://www.amazon.co.uk/Thermaltake-Commander-USB-Snow-Edition/dp/B006JQZ8MY/ref=sr_1_1?ie=UTF8&qid=1359982819&sr=8-1

I shall update with pics and such when it is here and everything is installed

Neptune24
Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7600)
Mother Board: Gigabyte GA-880GM-UD2H
BIOS: Award Modular BIOS v6.00PG
Processor: AMD PhenomII X4 965 Processor, 3.4GHz(Stock)
Memory: 16GB RAM
Graphics Card: GeForce GTX 550 Ti Memory: 1024 MB
GPU Driver:
8.17.12.7061
Direct X 11

gni2
Legit Little One
Legit Little One
Posts: 1
Joined: Sun Apr 05, 2015 6:20 pm
Contact:

Re: New Case

Postby gni2 » Sun Apr 05, 2015 6:27 pm

Not sure if this one has already been suggested but the
"DIYPC Cuboid-R Black/Red Aluminum / Steel MicroATX Mid Tower Computer Case Standard ATX / PS II Power Supply" is a beast
Image







http://ninjavsvitamix.com/


Return to “Cases, Power Supplies, and Cooling”

Who is online

Users browsing this forum: No registered users and 3 guests