I've sent 2 PM's but they show in my
OUTBOX but not in my SENT box but when I look at the messages it says they were sent, day & time.
Why don't they show in the SENT Box??
Please refer to my previous post re Memory Timing as recommended by the CRUCIAL tech. The settings in the BIOS look Ok except the TRAS which shows 24, they want it set at 28. They said to
set the COMMAND RATE at 2, not 1 or Auto. It is 2T so I assume that is what they meant.
Remember the Memtest 86+v4.20 says that each 4GB DDR3 stick is fine INDIVIDUALLY in either slot but errors occur when they are used as DUAL CHANNEL, supposed to be a matched set. I went into the BIOS and in to AI TWEAKER and found that these 4 settings they wanted of TCL 9, TRCD 9, TRP 9, and TRAS 24(
they wanted 28) were in grey and when I went to set the one that I thought was TRAS it showed 15 when I went to MANUAL. I was puzzled because I thought that would show as 24. I changed it tO 28 & hit F10 to Save & Exit.
It then told me it was OVERCLOCKED, so how do I change the 24 to a 28?
The
COMMAND RATE in the CPUZ MEMORY Capture I am enclosing shows 2T. They also said that the
MEMORY VOLTAGE should be 1.50 . Would it help to set it at 1.52 & try it.
ASUS Tech said to change the
AI CLOCK TWISTER to STRONG or STRONGER rather than AUTO. In the ASUS P5QC Motherboard Manual it says that setting the TWISTER to LIGHT or LIGHTER enhances DRAM COMPATIBILITY and setting it to STRONG or STRONGER accelerates DRAM PERFORMANCE. Any suggestions on which one to set it for as I've had times in REENCODING BLU RAY VIDEO with UNEXPLAINED SHUTDOWNS & a BLUE SCREEN when program for REENCODING is set at certain settings. Here are the CPUZ Snapshots.
I would appreciate very much if someone very familiar with the BIOS & DDR3 RAM to looka t my post & advise me what they think.
Many Thanks
Wayne
- Capture_CPUZ_GRAPHICS.PNG (60.41 KiB) Viewed 21783 times
- Capture_CPUZ_CPU.PNG (91.87 KiB) Viewed 21783 times
- Capture_CPUZ_MEMORY INFO.PNG (71.91 KiB) Viewed 21783 times
kenc51, I've posted the CPUZ's Screen Shots of my computer as you asked. Couuld U or KnightRid or Apoptosis or anyone with experience please comment on my problem & give me some instruction on changing the TRAS to 28 and comment on the DRAM VOLTAGE & the AI TWISTER setting.
It would be very much appreciated. I await, hopefully, your reply.
Many Thanks