Memory question

From general questions to the harder advanced user topics you will find them here!
Post Reply
User avatar
sbohdan
Legit Extremist
Legit Extremist
Posts: 1249
Joined: Sun Jul 17, 2005 9:33 am
Location: Canada
Contact:
Contact sbohdan

Memory question

Postby sbohdan » Fri Feb 04, 2011 10:41 pm

Just wanted to ask (I found no information on this anywhere), if a 1.65V memory woul be OK for my future sandy bridge platform? The memory in question is optimized for P55 chipset (according to OCZ's website) and I found no info on compatibility for P67, which uses 1.6V memory...

this is the memory: http://www.amazon.com/OCZ-Technology-PC3-19200-Voltage-OCZ3RPR2400CL10LV4GK/dp/B00432SVXE/ref=sr_1_1?ie=UTF8&s=electronics&qid=1296875638&sr=8-1

here it is on OCZ website: http://www.ocztechnology.com/ocz-ddr3-pc3-19200-cl10-edition-reaper-low-voltage-dual-channel.html

could anyone enlighten me on this? :prayer:

oh and if it's Ok - do you think it would be good memory for an OC (intel 2500K + Gigabyte GA-P67A-UD4)? This memory is CL10 timings - should I rather get something lower on Mhz but tighter on timings? :ANAL:
Main rig: NZXT Phantom modded case with Danger Den WC, Gigabyte GA-P67-UD4-B3, 2500K@4.7Ghz,1.428V, 8GB GSkill Ripjaws 2133Mhz 10-12-12-31@1.6V, MSI GTX 1060 3GT OC, Asus 24" 1ms 144hz, 2xOCZ Vertex4 128GB RAID0, Samsung 2TB; PC P&C 750W, Win7 Ultimate 64
Laptop: Dell XPS 1530 (T9500; 4GB 800 RAM; 120GB Crucial SSD; 8600GT; WIN7 64bit)
my complete GFX tuneup & cooling mod: viewtopic.php?t=3263&highlight=
Top
User avatar
sbohdan
Legit Extremist
Legit Extremist
Posts: 1249
Joined: Sun Jul 17, 2005 9:33 am
Location: Canada
Contact:
Contact sbohdan

Re: Memory question

Postby sbohdan » Mon Feb 07, 2011 6:50 pm

Anybody? I can't believe nobody knows the answer?! ](*,)
Main rig: NZXT Phantom modded case with Danger Den WC, Gigabyte GA-P67-UD4-B3, 2500K@4.7Ghz,1.428V, 8GB GSkill Ripjaws 2133Mhz 10-12-12-31@1.6V, MSI GTX 1060 3GT OC, Asus 24" 1ms 144hz, 2xOCZ Vertex4 128GB RAID0, Samsung 2TB; PC P&C 750W, Win7 Ultimate 64
Laptop: Dell XPS 1530 (T9500; 4GB 800 RAM; 120GB Crucial SSD; 8600GT; WIN7 64bit)
my complete GFX tuneup & cooling mod: viewtopic.php?t=3263&highlight=
Top
User avatar
skier
Moderator
Moderator
Posts: 4450
Joined: Mon Mar 26, 2007 3:29 pm
Location: Maine
Contact:
Contact skier

Re: Memory question

Postby skier » Tue Feb 08, 2011 1:01 am

that's very fast memory, and very expensive for the density you are getting, I have no idea about specific compatibilities but i doubt you would have a problem with sandy and RAM voltages, 1.65v is what some 1600MHz kits run at
-Austin
Image
Screamin' BCLK: Image
775 System (Overclocking Platform): Q8400/Q8300/E8400/E7400/E7500 - GA-EP45-UD3R v1.1 - 4GB (2x2) OCZ Reaper HPC DDR2 1066 CL5 2.1v Corsair TX-750w
Gamer: Asrock Z77 Extreme4, i7 3770K @4.6GHz, ThermalTake Armor A90 modded, 2x4GB GSKILL RipjawsX DDR3 2133 CL9, Corsair HX-750w, MSI GTX660 Twin Frozr
Server2012: Q9300 - 8GB DDR2 - Asus P5QL Pro - Corsair CX430 - Mirrored 2TB Seagate's with 2TB WD cav for fileshare backups, 1TB WD for OS backups
Top
Post Reply

Return to “Memory Forum”

Who is online

Users browsing this forum: No registered users and 2 guests