PCI-E Question for D975XBX2 Owners
PCI-E Question for D975XBX2 Owners
I'm confused on the 16x / 8x / 4x PCI-E connectors on this Intel board. I downloaded the PDF manual, but I'm still not sure I'm understanding correctly.
I'll use this as an example: I use a graphics card in the PCI-E 16x slot. Lets say I add two more cards (this may well happen): a PCI-E eSATA Multiplier Card in the PCI-E 8X slot, and an external Firewire 800 card in the PCI-E 4x slot.
If I were to do that, would the graphics card in the first slot automatically drop to 8x? Or is there a way I keep it running at 16x, while my other slots run at 8x and 4x?
I think it's this Crossfire thing that has me confused, because when using Crossfire, the connectors seem to switch to 8x 8x 4x speeds, for Crossfire support. But if you're not using Crossfire, are you still forced into 8x 8x 4x if you use all three connectors?
Another scenario I can picture is my main nVidia graphics card in the 16x slot, an older nVidia graphics card in the 8x (more for adding extra monitors than adding extra GPU power), and a Firewire 800 or eSATA multiplier in the 4x slot. Because there's two video cards here, I have the same question, am I forced into 8x 8x 4x, or can I still operate at 16x 8x 4x ?
I know that was a bit confusing, and I'm very appreciative of any help.
Thank you
I'll use this as an example: I use a graphics card in the PCI-E 16x slot. Lets say I add two more cards (this may well happen): a PCI-E eSATA Multiplier Card in the PCI-E 8X slot, and an external Firewire 800 card in the PCI-E 4x slot.
If I were to do that, would the graphics card in the first slot automatically drop to 8x? Or is there a way I keep it running at 16x, while my other slots run at 8x and 4x?
I think it's this Crossfire thing that has me confused, because when using Crossfire, the connectors seem to switch to 8x 8x 4x speeds, for Crossfire support. But if you're not using Crossfire, are you still forced into 8x 8x 4x if you use all three connectors?
Another scenario I can picture is my main nVidia graphics card in the 16x slot, an older nVidia graphics card in the 8x (more for adding extra monitors than adding extra GPU power), and a Firewire 800 or eSATA multiplier in the 4x slot. Because there's two video cards here, I have the same question, am I forced into 8x 8x 4x, or can I still operate at 16x 8x 4x ?
I know that was a bit confusing, and I'm very appreciative of any help.
Thank you
- mickrussom
- Legit Fanatic
- Posts: 134
- Joined: Mon Jan 15, 2007 4:30 am
- Location: Redwood City, CA
- Contact:
Re: PCI-E Question for D975XBX2 Owners
If you put more than one card in the first two slots, they drop to x8. You can see the PEG-lane count in the BIOS (you can answer this question by putting cards in and checking the BIOS for what the PEG lane count is).
If you have a video card in the primary slot, and put *anything* in the second slot, even a 1x, the two slots become x8+x8.
so the configuration options are :
16x 0x 4x
8x 8x 4x
This is what I have determined through experimentation.
If you have a video card in the primary slot, and put *anything* in the second slot, even a 1x, the two slots become x8+x8.
so the configuration options are :
16x 0x 4x
8x 8x 4x
This is what I have determined through experimentation.
- mickrussom
- Legit Fanatic
- Posts: 134
- Joined: Mon Jan 15, 2007 4:30 am
- Location: Redwood City, CA
- Contact:
Re: PCI-E Question for D975XBX2 Owners
Another way to look at this is here:AARRGGHHH wrote:
I know that was a bit confusing, and I'm very appreciative of any help.
Thank you
http://www.intel.com/products/chipsets/975x/index.htm
Tee 975X has 16 lanes. The ICH7R has 4. There is no way to exceed 20 lanes on this board.
Assume for a moment the 4x slot over in the corner is always on the ICH7R. The 975X must give its 16 lanes to the other two slots.
Since express can be 1x, 4x, 8x or 16x, if any lane is required on the second slot the first one must drop to x8.
The 975X chipset is showing its age here with a small total lane capability.
Thanks very much for the replies.
I appreciate the help.
Is there any way to change the lane assignments in the BIOS (or anywhere else)? In other words, of the 16 available 975X PCI-E lanes, can I allow 12 for the graphics card, and 4 for a secondary card?mickrussom wrote:The 975X must give its 16 lanes to the other two slots.
I havent bought the board yet. Are there other 975X boards with more lanes, or would I have to go with an SLI board for additional lanes?mickrussom wrote:The 975X chipset is showing its age here with a small total lane capability.
I appreciate the help.
- mickrussom
- Legit Fanatic
- Posts: 134
- Joined: Mon Jan 15, 2007 4:30 am
- Location: Redwood City, CA
- Contact:
Here is why I think its not possible. I believe PCI-express is specified as 1x, 4x, 8x and 16x. While other lane counts to devices may be possible (like any number between 1 and 16 that isnt 1,4,8,16), I haven't seen it.AARRGGHHH wrote:Is there any way to change the lane assignments in the BIOS (or anywhere else)? In other words, of the 16 available 975X PCI-E lanes, can I allow 12 for the graphics card, and 4 for a secondary card?
I havent bought the board yet. Are there other 975X boards with more lanes, or would I have to go with an SLI board for additional lanes?
My experience with this board is no, it falls from 16x to 8x if anything touches the second PCI-express slot. My idea of how this works is this: If 16, 8, 4, 1 are the only valid modes, than any needs for any lanes off of the 975X in the second slot would cause the 16 lanes to go to 8, since that is the next valid lane-amount.
You might think, hey, ill but a 1 lane card in slot 2 and the PEG (slot 1) will run in 15x - not the case, i tried this, it drops to 8.
I would wait to see the Bearlake x38 boards coming out shortly if you haven't bought.
For a sample of what is to come:
http://www.hexus.net/content/item.php?item=8923
See the Gigabyte GA-X38-DQ6 (DDR2) or GA-X38T-DQ6 (DDR3).
They have dual PCI-express x16 * x16 electrical, meaning 32 lanes dedicated to those two slots.
I don't believe this would ever be possible in the 975X family.
- mickrussom
- Legit Fanatic
- Posts: 134
- Joined: Mon Jan 15, 2007 4:30 am
- Location: Redwood City, CA
- Contact:
I share this sentiment, despite my frustration about the XBX2. I've never been a fan of SiS, Via or the "other" categories. I've done ok with ServerWorks, Intel, and Pure AMD (AMD-8111/8131), but those "other" guys, like Nvidia, ATI, SiS, VIA, never floated my boat.AARRGGHHH wrote:However, I'd still prefer to go Intel Thanks very much for your replies
Check out specs on:
http://en.wikipedia.org/wiki/List_of_Intel_chipsets
The Bearlake X38 will have two x16 PCI-express 2.0 ports. It might be worth the wait for a month or two.
I personally will not buy Nvidia or ATI chipsets due to problems I've had with them through the years. I can usually fix, resolve get them working, thats not the problem, its the amount or severity or annoyance-level of the issues that gets me the most.
Intel is clearly taking a bad turn with regards to support issues, but behind the ass-support, they are the makes of the world's best silicon right now (and Im not talking about the Itanic/Itanium piece of crap), and they can certainly handle the chipset.
I think they should consider licensing BIOS code if they cant make a decent BIOS themselves.
Anyways, I feel the pain, you want to go with old faithful - but right now, you are right between the 975X and something else.
I plan to dump the XBX2 for a Bearlake X38 as soon as its feasible.
-
- Legit Extremist
- Posts: 2301
- Joined: Tue Mar 27, 2007 3:35 pm
Re: PCI-E Question for D975XBX2 Owners
Sorry about the delayed reply, I've had an insane work schedule.
I was thinking about using that second slot for something like an eSATA card, but I'm curious about whether there's an option to use 2 nVidia graphics cards. The Intel site says very little: "The Intel® G35 Express Chipset and the advanced Intel® X38 enthusiast chipset with dual graphics support will ship within 90 days." So it says "Dual Graphics Support", but it doesnt say if it's limited to ATI cards, or if it includes nVidia. In any case, two x16 ports would be nice.
Since the prices will drop soon, I could probably put a Q6600 Core 2 Quad 2.4 Ghz in here, correct? I guess that depends on whether they release a BIOS for "older" chips like the Q6600.
My main concern here will be that this is a first generation board. How long does it usually take for the first revision to come out?
As always, many thanks.
That's interesting, thank you. I didnt know that any of the new Intel chipsets had 2 PCIe x16 slots.mickrussom wrote:Check out specs on:
http://en.wikipedia.org/wiki/List_of_Intel_chipsets
The Bearlake X38 will have two x16 PCI-express 2.0 ports. It might be worth the wait for a month or two.
I was thinking about using that second slot for something like an eSATA card, but I'm curious about whether there's an option to use 2 nVidia graphics cards. The Intel site says very little: "The Intel® G35 Express Chipset and the advanced Intel® X38 enthusiast chipset with dual graphics support will ship within 90 days." So it says "Dual Graphics Support", but it doesnt say if it's limited to ATI cards, or if it includes nVidia. In any case, two x16 ports would be nice.
Since the prices will drop soon, I could probably put a Q6600 Core 2 Quad 2.4 Ghz in here, correct? I guess that depends on whether they release a BIOS for "older" chips like the Q6600.
My main concern here will be that this is a first generation board. How long does it usually take for the first revision to come out?
As always, many thanks.
Re: PCI-E Question for D975XBX2 Owners
Will a PCI Express 2.0 graphics card work on this board?
- DaddyRabbit
- Legit Extremist
- Posts: 478
- Joined: Fri Dec 29, 2006 9:46 am
Re: PCI-E Question for D975XBX2 Owners
Yes, PCI-E 2.0 is backward compatiblehurf_durf wrote:Will a PCI Express 2.0 graphics card work on this board?
Asrock Z68 Extreme4 Gen3
Core i7 2600k
Corsair H100 Liquid Cooler
8gig (2x4) G.Skill Ripjaws DDR3-1600
Powercolor HD5870 PCS+
OCZ Agility 2 240G SSD (boot, programs, games)
WD Caviar Black 1TB (Data)
CM UCP RS700-AAAAA3 700W 80+ Silver PSU
CM Storm Sniper
Gateway FHD2400
Win 7 Pro 64bit
Core i7 2600k
Corsair H100 Liquid Cooler
8gig (2x4) G.Skill Ripjaws DDR3-1600
Powercolor HD5870 PCS+
OCZ Agility 2 240G SSD (boot, programs, games)
WD Caviar Black 1TB (Data)
CM UCP RS700-AAAAA3 700W 80+ Silver PSU
CM Storm Sniper
Gateway FHD2400
Win 7 Pro 64bit
-
- Legit Little One
- Posts: 1
- Joined: Wed Aug 08, 2012 10:08 pm
Re: PCI-E Question for D975XBX2 Owners
so will gen 3.0 pciexpress will also work with this motherboard???DaddyRabbit wrote:Yes, PCI-E 2.0 is backward compatiblehurf_durf wrote:Will a PCI Express 2.0 graphics card work on this board?
- Sparky
- Legit Extremist
- Posts: 727
- Joined: Fri Feb 16, 2007 4:47 pm
- Location: Huntington Beach, CA USA
Re: PCI-E Question for D975XBX2 Owners
Yes, it's backwards compatible.
MSI Meg X570 Unify | Ryzen 3900X | Noctuna NH-U12A | G.Skill RipJaws DDR4 3600 16GB | Samsung 970 Pro 512GB M.2 NVMe | (2) WD Blue 3TB Backups | MSI 2060 Super Gaming X | Meshify - C | SB X-Fi