need help updating RAM in D975XBX2

Discussion about Intel CPU Motherboards
Post Reply
slickmarty
Legit Aficionado
Legit Aficionado
Posts: 76
Joined: Tue Feb 20, 2007 1:40 pm
Location: Western New York

need help updating RAM in D975XBX2

Post by slickmarty »

i have the D975XBX2 MB with 4 1GB sticks of Corsair RAM. when i went from 2 1GB sticks to 4 i thought that i bought the exact same thing but didn't and had a heck of a time until i figured out that i the new two weren't EXACTLY the same. i want to get 2 2GB sticks for channels 1&3 and hopefully keep cahnnels 2&4 with the 1GB sticks until i can get two more 2GB sticks. will this work??? since this in now a little older of a MB there aren't many tested RAM modules on the Intel MB support site so how do i know what will work? has anyone here put 2 GB sticks in their D975XBX2? what kind and what EXACT part number if you would please. I saw this on N**E** and it SEEMS like a match but i am not sure.
CORSAIR XMS2 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Desktop Memory Model TWIN2X4096-6400C5C - Retail .
http://www.newegg.com/Product/NewProduc ... -_-Product

any help would be much appreciated.
thanks.
slickmarty
Legit Aficionado
Legit Aficionado
Posts: 76
Joined: Tue Feb 20, 2007 1:40 pm
Location: Western New York

Re: need help updating RAM in D975XBX2

Post by slickmarty »

i've been searching N**E** for RAM and have found lots of DDR2 240pin DDR2 800 PC2800 RAM from different companies and ever the Corsair has 5 or 6 sticks that meet this criteria.. how is one to know which of these will work???
thanks
User avatar
smack323
Legit Extremist
Legit Extremist
Posts: 1275
Joined: Fri Dec 30, 2005 4:28 pm
Location: Waukesha, WI

Re: need help updating RAM in

Post by smack323 »

well this memory is listed on Intel site as "tested memory"
http://www.amazon.com/dp/B000FGD3WQ/?ta ... pai87cr2_b

these are the specs:

The board has four DIMM sockets and supports the following memory features:

1.8 V and 1.9 V DDR2 SDRAM DIMMs
Unbuffered, single-sided or double-sided DIMMs with the following restriction: Double-sided DIMMs with x16 organization are not supported.
8 GB maximum total system memory
Minimum total system memory: 128 MB
ECC DIMMs and Non-ECC DIMMs
Serial Presence Detect
DDR2 800, DDR2 667, and DDR2 533 MHz SDRAM DIMMs

I would say that any kits from Newegg that fits in line with these should work- I have used Patriot, G.skill, Cosair memory kits all with no problems
Core i5-6500 - Corsair Vengence 16GB DDR4 2133 - MSI 2080Ti - Antec 750W - Crucial 525GB SSD - Windows 10 64bit - ASUS 32" LED
User avatar
bubba
Staff Writer
Staff Writer
Posts: 4765
Joined: Sun May 01, 2005 10:24 am
Location: STL

Re: need help updating RAM in D975XBX2

Post by bubba »

"The democracy will cease to exist when you take away from those who are willing to work and give to those who would not."
-Thomas Jefferson
User avatar
Sparky
Legit Extremist
Legit Extremist
Posts: 727
Joined: Fri Feb 16, 2007 4:47 pm
Location: Huntington Beach, CA USA

Re: need help updating RAM in D975XBX2

Post by Sparky »

I've used this Corsair XMS PC6400 with no issues:
http://www.newegg.com/Product/NewProduc ... 6820145590

I've also used this Kingston HyperX PC6400 with no problems:
http://www.newegg.com/Product/NewProduc ... 6820104073

Right now I'm using this G.Skill PC8500 (easier to OC than PC6400) with no complaints:
http://www.newegg.com/Product/NewProduc ... 6820231166

I've never been able to get my XBX2 to work with 4 - 1GB sticks, even when they were matched sticks. Sometimes it wouldn't boot and if it did boot it was very unstable.
MSI Meg X570 Unify | Ryzen 3900X | Noctuna NH-U12A | G.Skill RipJaws DDR4 3600 16GB | Samsung 970 Pro 512GB M.2 NVMe | (2) WD Blue 3TB Backups | MSI 2060 Super Gaming X | Meshify - C | SB X-Fi
slickmarty
Legit Aficionado
Legit Aficionado
Posts: 76
Joined: Tue Feb 20, 2007 1:40 pm
Location: Western New York

Re: need help updating RAM in D975XBX2

Post by slickmarty »

thanks. i'll look into these.
northernpal
Legit Little One
Legit Little One
Posts: 4
Joined: Mon Aug 13, 2007 2:11 pm

Re: need help updating RAM in D975XBX2

Post by northernpal »

I am using these without any problems
G.SKILL F2-8500CL5D-4GBPK PC2-8500 4GB 2X2GB DDR2-1066 CL5-5-5-15 240PIN Dual Channel Memory Kit
http://www.ncix.com/products/index.php? ... re=G.Skill
Once the system is stable (Overclocking a Q6600 and will be trying my luck with a QX6850 as well) I will try and use 4 x 2GB for 8GB total (but for now running fine with a 4GB kit)


I have two other BadAxe2 machines running with four 1GB sticks fine (for years) but I do know that these boards are not as stable when all 4 slots are filled (and I have even heard of a few folks having memory get fried when moving up to 4 slots ..)
It has been awhile since I configured the 4x1GB systems but if someone wants more info I will look into the BIOS settings etc.
System: D975XBX2 MB Revison:505 BIOS:2838, Q6600, 2 x 2GB G.Skill PC2-8500 DDR2-1066 MHz, BFG 8800GT OC2 512 PCIe; plus all the usual other stuff....
slickmarty
Legit Aficionado
Legit Aficionado
Posts: 76
Joined: Tue Feb 20, 2007 1:40 pm
Location: Western New York

Re: need help updating RAM in D975XBX2

Post by slickmarty »

i know that when i went from the 2 1gb sticks of ram to 4 of them i had a lot of stability problems but the second sticks of 1gb RAM that installed were not EXACTLY a match for the first 2. when i got the exact same match the system has worked fine and stable for years now. What is in there now and working fine is: Corsair MEM 1Gx2Corsair Twin2x2048-6400 R. When i added the MEM 1gx2/Cor 240P Twin2x2048-6400C4 is when things went crazy, atomatic re-booting, crashes and other instability. as soon as i removed the c4 and installed two more sticks of the R everything was perfecto...
Post Reply