EVGA Shows Off Their LGA2011 Motherboard For Sandy Bridge-EP

Discussion about Intel CPU Motherboards
Post Reply
User avatar
Apoptosis
Site Admin
Site Admin
Posts: 33941
Joined: Sun Oct 05, 2003 8:45 pm
Location: St. Louis, Missouri
Contact:

EVGA Shows Off Their LGA2011 Motherboard For Sandy Bridge-EP

Post by Apoptosis »

evgamb.jpg
EVGA teased its community with a picture of one of its first single-socket LGA2011 motherboards. The graphics card major was missed at this year's Computex event at the wall holding upcoming LGA2011 boards. The company then pacified its fans with news that it was working on a monstrous dual-LGA2011 motherboard along the lines of the SR-2. We can't tell very much about the board in the picture below, except that it has socket LGA2011 with a typical CPU area layout, makes smart use of the congested VRM area with high-C capacitors and driver-MOSFETs, and looks to have some innovations such as right-angled 24-pin ATX power connector. Power, reset, and clear CMOS buttons are found at a place accessible to overclockers, so are some voltage measurement points. One can also see a heat pipe winding its way about into the frame on the top-left corner. That's about it with what we can tell from the picture.
source
Find us on Facebook to discover the faces behind the names!
Follow Me on Twitter!
Post Reply