CPU TEMP
- infinitevalence
- Legit Extremist
- Posts: 2841
- Joined: Sat Apr 24, 2004 12:40 pm
- Location: Nashville, TN
- Contact:
yeah, you know, I owe Bio alot, guy really helped me out by giving some good advice. I have spent alot lately on this rig, and for the most part am very happy. I will tinker and mod alot, and hopefully my experiences will help other make good decisions and spend their money wisely.
I contacted Danger Den today, they forgot to send me the nozzle kit. Once I get that I'm going to switch out the nozzles from stock to the #4, which everyone says is the best. I also made a slight change to the radiator and fan setup that helped the temp a little. There is a decent size gap between the fan and radiator, I figured that there was enough space that more air was being sucked through there than through the radiator itself, so I used some electrical tape and ran a seam arounfd the radiator and fan, closing off the gap. There was a definite pressure change. I think throwing anothing 120mm fan on the front and doing the same will result in an even bigger temp drop.
I contacted Danger Den today, they forgot to send me the nozzle kit. Once I get that I'm going to switch out the nozzles from stock to the #4, which everyone says is the best. I also made a slight change to the radiator and fan setup that helped the temp a little. There is a decent size gap between the fan and radiator, I figured that there was enough space that more air was being sucked through there than through the radiator itself, so I used some electrical tape and ran a seam arounfd the radiator and fan, closing off the gap. There was a definite pressure change. I think throwing anothing 120mm fan on the front and doing the same will result in an even bigger temp drop.
-
- Legit User
- Posts: 5
- Joined: Sun May 30, 2004 5:39 pm