Brand New i7 980 running very hot???
Brand New i7 980 running very hot???
I received a new custom built (from a reputable company) PC today which I will be using for high end CAD rendering...
To see how it performed I installed a few programmes and set it to render on a large image, monitoring the core temps and load (all 6 of them) I could see it was running at 100% load which is fine but temps were hitting 84 degrees C!!!!!
After leaving it for an hour or so I came back to it to find it shut down and on a re boot got the 'Windows did not shut down properly' screen hinting at an overheat???
I am using a Titan Fenrir Evo Extreme Cooler which should be able to cope with that no problem, or am I wrong?
I will copy the spec of the machine below, let me know what you think!
Case COOLERMASTER COSMOS 1000 SILVER SILENT CASE
Processor (CPU) Intel® Core™i7 Six Core Processor i7-980 (3.33GHz) 4.8GTs/12MB
Motherboard ASUS® P6X58D-E: DDR3, USB 3.0, SATA 6.0GB/s, 3-Way SLI
Memory (RAM) 12GB KINGSTON HYPER-X TRI-DDR3 1600MHz, X.M.P (3 x 4GB KIT)
Graphics Card 1GB AMD RADEON™ HD6850 - 2 DVI,HDMI, DP - DX® 11, Eyefinity 3
Capable
Memory - 1st Hard Disk 1TB WD CAVIAR BLACK WD1002FAEX, SATA 6 Gb/s, 64MB CACHE
(7200rpm)
2nd Hard Disk 1TB WD CAVIAR BLACK WD1002FAEX, SATA 6 Gb/s, 64MB CACHE
(7200rpm)
1st DVD/BLU-RAY Drive 24x DUAL LAYER DVD WRITER ±R/±RW/RAM
Memory Card Reader INTERNAL 52 IN 1 CARD READER (XD, MS, CF, SD, etc) + 1 x USB 2.0
PORT
Power Supply CORSAIR 750W ENTHUSIAST SERIES™ TX750 V2-80 PLUS® BRONZE
Processor Cooling TITAN FENRIR EVO EXTREME HEATPIPE CPU COOLER
Sound Card ONBOARD 8 CHANNEL (7.1) HIGH DEF AUDIO (AS STANDARD)
Network Facilities ONBOARD GIGABIT LAN & WIRELESS 802.11N 300Mbps PCI CARD
USB Options 6 x USB 2.0 PORTS @ BACK PANEL (MIN 2 FRONT PORTS) AS
To see how it performed I installed a few programmes and set it to render on a large image, monitoring the core temps and load (all 6 of them) I could see it was running at 100% load which is fine but temps were hitting 84 degrees C!!!!!
After leaving it for an hour or so I came back to it to find it shut down and on a re boot got the 'Windows did not shut down properly' screen hinting at an overheat???
I am using a Titan Fenrir Evo Extreme Cooler which should be able to cope with that no problem, or am I wrong?
I will copy the spec of the machine below, let me know what you think!
Case COOLERMASTER COSMOS 1000 SILVER SILENT CASE
Processor (CPU) Intel® Core™i7 Six Core Processor i7-980 (3.33GHz) 4.8GTs/12MB
Motherboard ASUS® P6X58D-E: DDR3, USB 3.0, SATA 6.0GB/s, 3-Way SLI
Memory (RAM) 12GB KINGSTON HYPER-X TRI-DDR3 1600MHz, X.M.P (3 x 4GB KIT)
Graphics Card 1GB AMD RADEON™ HD6850 - 2 DVI,HDMI, DP - DX® 11, Eyefinity 3
Capable
Memory - 1st Hard Disk 1TB WD CAVIAR BLACK WD1002FAEX, SATA 6 Gb/s, 64MB CACHE
(7200rpm)
2nd Hard Disk 1TB WD CAVIAR BLACK WD1002FAEX, SATA 6 Gb/s, 64MB CACHE
(7200rpm)
1st DVD/BLU-RAY Drive 24x DUAL LAYER DVD WRITER ±R/±RW/RAM
Memory Card Reader INTERNAL 52 IN 1 CARD READER (XD, MS, CF, SD, etc) + 1 x USB 2.0
PORT
Power Supply CORSAIR 750W ENTHUSIAST SERIES™ TX750 V2-80 PLUS® BRONZE
Processor Cooling TITAN FENRIR EVO EXTREME HEATPIPE CPU COOLER
Sound Card ONBOARD 8 CHANNEL (7.1) HIGH DEF AUDIO (AS STANDARD)
Network Facilities ONBOARD GIGABIT LAN & WIRELESS 802.11N 300Mbps PCI CARD
USB Options 6 x USB 2.0 PORTS @ BACK PANEL (MIN 2 FRONT PORTS) AS
- Apoptosis
- Site Admin
- Posts: 33941
- Joined: Sun Oct 05, 2003 8:45 pm
- Location: St. Louis, Missouri
- Contact:
Re: Brand New i7 980 running very hot???
The Titan Fenrir is a very good CPU cooler and I have one that I use on the test bench to be honest. I have it on a Core i7-970 right now and it's doing just fine.
If I were you I'd remove the heatsink (be sure you have new thermal compound) and make sure it's seated on the processor correctly. Since you bought a brand new PC it likely got shipped and if they shipped it with the HSF installed it might have gotten knocked or something like that.
The temperatures are too hot for a stock clocked processor. Just curious who did you buy the system from?
If I were you I'd remove the heatsink (be sure you have new thermal compound) and make sure it's seated on the processor correctly. Since you bought a brand new PC it likely got shipped and if they shipped it with the HSF installed it might have gotten knocked or something like that.
The temperatures are too hot for a stock clocked processor. Just curious who did you buy the system from?
Re: Brand New i7 980 running very hot???
I bought it from PCSPECIALIST.CO.UK who get good reviews etc and been very happy with past purchases.
How hard is it to remove heatsink > reapply thermal compound > and re attach heatsink, im not 100% tech savvy but prepared to give it a go!
Would you agree that the temps I am getting are not what I should be getting?
How hard is it to remove heatsink > reapply thermal compound > and re attach heatsink, im not 100% tech savvy but prepared to give it a go!
Would you agree that the temps I am getting are not what I should be getting?
Re: Brand New i7 980 running very hot???
Can you post a picture or two of the interior of the case? Pictures are worth a 1,000 words.
- DJ Tucker
- Legit Extremist
- Posts: 1502
- Joined: Tue Dec 30, 2008 11:52 am
- Location: Hardbase Headquaters
- Contact:
Re: Brand New i7 980 running very hot???
pcspecialist.co.uk are a great company. one of the best for custom built computers and their prices are fantastic! but as is already said i would re-apply the thermal paste as it sounds very much like the heatsink got knocked about causing it to dislodge. i used eclipsecomputer.com and their prices are also fantastic and you can buy individual components but i would never use them to build me a pc as i found out from my 2 mates that had they pc damaged in transport and then when fixed they damaged the pc internaly they are very bad.
MSI Z590 Gaming Edge Wifi
Core i7 10700KF 5Ghz @ 1.25v With Alphacool Eisblock XPX Aurora Edge
Gigabyte RTX 2080 Super 1980Mhz @ 0.925v With TechN GPU Block
32Gb Corsair Vengeance RGB Pro 3600Mhz 16-18-18-38
Aqua Computer Ultitube 200 Pro D5 Next
Corsair XR5 240mm x2 & 360mm
Intel 670p 2Tb & WD Blue M.2 2Tb
Corsair HX1000i
Philips Momentum 3000 24" (Main) & MSI Optix G241V E2 (Second)
Lian Li O11D
Roccat Vulcan 120 Aimo, Roccat Kone Aimo Remastered and Roccat Sym Pro Air
Core i7 10700KF 5Ghz @ 1.25v With Alphacool Eisblock XPX Aurora Edge
Gigabyte RTX 2080 Super 1980Mhz @ 0.925v With TechN GPU Block
32Gb Corsair Vengeance RGB Pro 3600Mhz 16-18-18-38
Aqua Computer Ultitube 200 Pro D5 Next
Corsair XR5 240mm x2 & 360mm
Intel 670p 2Tb & WD Blue M.2 2Tb
Corsair HX1000i
Philips Momentum 3000 24" (Main) & MSI Optix G241V E2 (Second)
Lian Li O11D
Roccat Vulcan 120 Aimo, Roccat Kone Aimo Remastered and Roccat Sym Pro Air
- Apoptosis
- Site Admin
- Posts: 33941
- Joined: Sun Oct 05, 2003 8:45 pm
- Location: St. Louis, Missouri
- Contact:
Re: Brand New i7 980 running very hot???
It's rather easy and takes under five minutes to do. Yes, I agree the temperatures that you are seeing are too high for that aftermarket CPU Cooler.monrom wrote:I bought it from PCSPECIALIST.CO.UK who get good reviews etc and been very happy with past purchases.
How hard is it to remove heatsink > reapply thermal compound > and re attach heatsink, im not 100% tech savvy but prepared to give it a go!
Would you agree that the temps I am getting are not what I should be getting?
Re: Brand New i7 980 running very hot???
@ stock speed and full load it shouldn't be going over 55C with that cooler and yes 84C is waaaaaaaaaayyyy to high. You can easily fry the CPU and motherboard. It is easy to replace the CPU cooler and I would get a good quality paste (tuniq TX-2 or 3?) to get the best results. Good luck. On how to remove and replace the cooler, just google itmonrom wrote:I bought it from PCSPECIALIST.CO.UK who get good reviews etc and been very happy with past purchases.
How hard is it to remove heatsink > reapply thermal compound > and re attach heatsink, im not 100% tech savvy but prepared to give it a go!
Would you agree that the temps I am getting are not what I should be getting?
Main rig: NZXT Phantom modded case with Danger Den WC, Gigabyte B550 Aorus Elite, Ryzen 5800X @ stock, 32GB Patriot Viper DDR4 3200Mhz 16-18-18-36-1T, AMD RX 5700XT + AlphaCool WC, ACER Nitro XV2 27", SP 1TB nvme PCiE GEN3, Samsung 2TB; Cooler Master MW Gold 650W, Win10 Pro 64
my complete GFX tuneup & cooling mod: http://forums.legitreviews.com/viewtopi ... highlight=
my complete GFX tuneup & cooling mod: http://forums.legitreviews.com/viewtopi ... highlight=
Re: Brand New i7 980 running very hot???
Ok well spoke to PCS today, they were telling me it's normal for the 980 to run at 80 degrees C and then told me to go into the Bios and change fan modes from 'Standard' to 'Turbo' which I did! The outcome, no difference what so ever, still not convinced it's normal to be running at 80 degrees C on 100% load! What does anyone else get on a similar i7 on Prime?
I have attached two pictures but not sure how helpful they might be, anyone care to point me in the direction of some good instructions of how to remove and re-install a heat sink? Also I have given the Fenrir a wobble while off and cant say it feels particularly loose! The system idles at 36 or so but seems to go through the roof with load!
Thanks again!
I have attached two pictures but not sure how helpful they might be, anyone care to point me in the direction of some good instructions of how to remove and re-install a heat sink? Also I have given the Fenrir a wobble while off and cant say it feels particularly loose! The system idles at 36 or so but seems to go through the roof with load!
Thanks again!
Re: Brand New i7 980 running very hot???
Does the cooler use the Intel Push-Pin setup?
http://www.google.com/search?hl=en&biw= ... a=N&tab=wi
Or does it use a different mounting system?
Since you say it feels loose then it isn't right. Even with the crappy push-pin setup it still shouldn't move. I have a huge Scythe push-pin cooler and when all the pins are locked the cooler doesn't move.
http://www.google.com/search?hl=en&biw= ... a=N&tab=wi
Or does it use a different mounting system?
Since you say it feels loose then it isn't right. Even with the crappy push-pin setup it still shouldn't move. I have a huge Scythe push-pin cooler and when all the pins are locked the cooler doesn't move.
Re: Brand New i7 980 running very hot???
If they told you that 84C @ load is normal, then they are plain stupid. here is a review from LR: http://www.legitreviews.com/article/979/17/monrom wrote:Ok well spoke to PCS today, they were telling me it's normal for the 980 to run at 80 degrees C and then told me to go into the Bios and change fan modes from 'Standard' to 'Turbo' which I did! The outcome, no difference what so ever, still not convinced it's normal to be running at 80 degrees C on 100% load! What does anyone else get on a similar i7 on Prime?
I have attached two pictures but not sure how helpful they might be, anyone care to point me in the direction of some good instructions of how to remove and re-install a heat sink? Also I have given the Fenrir a wobble while off and cant say it feels particularly loose! The system idles at 36 or so but seems to go through the roof with load!
Thanks again!
As you see your temps should be about 55C as I wrote before (@ stock speed) and about 66C @ 3.5Ghz OC.
To remove the cooler, remove the RAM and the graphics card, so you have easy access to the cooler's base. Next Just just unscrew with your thumb the 4 thumb screws that attach the cooler:
http://photo.hardwarebistro.com/albums/ ... rir_33.jpg
After reaplying the thermal paste just put back the cooler and screw them back. Remember not to put too much paste, just a thin even layer on the CPU (after cleaning off the old paste).
Main rig: NZXT Phantom modded case with Danger Den WC, Gigabyte B550 Aorus Elite, Ryzen 5800X @ stock, 32GB Patriot Viper DDR4 3200Mhz 16-18-18-36-1T, AMD RX 5700XT + AlphaCool WC, ACER Nitro XV2 27", SP 1TB nvme PCiE GEN3, Samsung 2TB; Cooler Master MW Gold 650W, Win10 Pro 64
my complete GFX tuneup & cooling mod: http://forums.legitreviews.com/viewtopi ... highlight=
my complete GFX tuneup & cooling mod: http://forums.legitreviews.com/viewtopi ... highlight=
Re: Brand New i7 980 running very hot???
Ok, a breakthrough at last, noticed one of the mounting screws was a bit loose, tightened it up (a-lot) and presto, max temps on 100% load are now 61 Degrees C, surprised that PCS missed something like that! Is 61 Degrees C a good temp to be getting at 100% load or should I be on the phone to them asking for better?
No idea what thermal compound they might have used perhaps I should buy a good one and try and re-apply everything!
Once again thanks for all the help guys!
oh and according to 'Core Temp 0.99.8 Frequency is running at 3474.23, I was pretty sure stock speeds were 3.33??? or is this the intel 'Turbo Boost' at work here?
No idea what thermal compound they might have used perhaps I should buy a good one and try and re-apply everything!
Once again thanks for all the help guys!
oh and according to 'Core Temp 0.99.8 Frequency is running at 3474.23, I was pretty sure stock speeds were 3.33??? or is this the intel 'Turbo Boost' at work here?
Re: Brand New i7 980 running very hot???
I think that chip has different frequencies (Turbo Boost) depending on how many cores are being loaded. I think you should call and tell them you had to tighten down one of the screws. If nothing else have them make a note of it in case something happens down the road.
Re: Brand New i7 980 running very hot???
If you don't intend to OC further, than you are OK. If you do, than every degree counts. I would get a tuniq TX-2 if I was you but I'm not youmonrom wrote:Ok, a breakthrough at last, noticed one of the mounting screws was a bit loose, tightened it up (a-lot) and presto, max temps on 100% load are now 61 Degrees C, surprised that PCS missed something like that! Is 61 Degrees C a good temp to be getting at 100% load or should I be on the phone to them asking for better?
No idea what thermal compound they might have used perhaps I should buy a good one and try and re-apply everything!
Once again thanks for all the help guys!
oh and according to 'Core Temp 0.99.8 Frequency is running at 3474.23, I was pretty sure stock speeds were 3.33??? or is this the intel 'Turbo Boost' at work here?
http://www.amazon.com/TUNIQ-TX-2-PERFOR ... 987&sr=8-4
Main rig: NZXT Phantom modded case with Danger Den WC, Gigabyte B550 Aorus Elite, Ryzen 5800X @ stock, 32GB Patriot Viper DDR4 3200Mhz 16-18-18-36-1T, AMD RX 5700XT + AlphaCool WC, ACER Nitro XV2 27", SP 1TB nvme PCiE GEN3, Samsung 2TB; Cooler Master MW Gold 650W, Win10 Pro 64
my complete GFX tuneup & cooling mod: http://forums.legitreviews.com/viewtopi ... highlight=
my complete GFX tuneup & cooling mod: http://forums.legitreviews.com/viewtopi ... highlight=
- kenc51
- Legit Extremist
- Posts: 5167
- Joined: Thu Jun 23, 2005 1:56 pm
- Location: Dublin, Republic of Ireland
- Contact:
Re: Brand New i7 980 running very hot???
May be im missing something, but how are you recording your temps?
Re: Brand New i7 980 running very hot???
I don't know what the topic creator used, but I use CoreTemp: http://www.alcpu.com/CoreTemp/kenc51 wrote:May be im missing something, but how are you recording your temps?
Re: Brand New i7 980 running very hot???
If I had to guess it's probably ASUS's PC Probe. I'd imagine the OEM probably just inserted the disc that came with the motherboard and told it to install all of the software on the disc.kenc51 wrote:May be im missing something, but how are you recording your temps?
Re: Brand New i7 980 running very hot???
Yea, it's 'Core Temp 0.99.8' it's meant to be relatively accurate. I now have the cores running at an acceptable temperature (63 deg C at 100% load), thanks for the help! I rang PCS again who said again 85 degrees C was quite normal and in THEIR testing found that the optimum temp for an i7 980 was 85 - 90 degrees C!!!!! Somehow I think they just did not want to pay for a return and re-deliver as these temps are ludicrous! But im happy with temps I have now!
Although....as an after thought any ideas as to why cores 5 and 6 are running 8 degrees (give or take) higher than 1,2,3,4? Termal paste position???
Although....as an after thought any ideas as to why cores 5 and 6 are running 8 degrees (give or take) higher than 1,2,3,4? Termal paste position???
Re: Brand New i7 980 running very hot???
Then they're idiots. With the stock cooler that CPU hits the 70s C.monrom wrote:I rang PCS again who said again 85 degrees C was quite normal and in THEIR testing found that the optimum temp for an i7 980 was 85 - 90 degrees C!!!!!
Although....as an after thought any ideas as to why cores 5 and 6 are running 8 degrees (give or take) higher than 1,2,3,4? Termal paste position???
The 5-6 cores might not be making as good of contact with the HSF base. They could also be working harder, for whatever reason. My Core #3 on my Q9550 tends to run hotter than the other 3. I guess that's just the way it goes some times. Download the Super Pi build that tests each core and comes back with an average (sorry forgot the name). I can almost guarantee you that the 5th and 6th cores will have a faster completion time than the others (was the case with me an my core #3).
Re: Brand New i7 980 running very hot???
I believe your thinking about hyper-pi, runs an instance of Super-pi on each of the coresMajor_A wrote:Then they're idiots. With the stock cooler that CPU hits the 70s C.monrom wrote:I rang PCS again who said again 85 degrees C was quite normal and in THEIR testing found that the optimum temp for an i7 980 was 85 - 90 degrees C!!!!!
Although....as an after thought any ideas as to why cores 5 and 6 are running 8 degrees (give or take) higher than 1,2,3,4? Termal paste position???
The 5-6 cores might not be making as good of contact with the HSF base. They could also be working harder, for whatever reason. My Core #3 on my Q9550 tends to run hotter than the other 3. I guess that's just the way it goes some times. Download the Super Pi build that tests each core and comes back with an average (sorry forgot the name). I can almost guarantee you that the 5th and 6th cores will have a faster completion time than the others (was the case with me an my core #3).
Re: Brand New i7 980 running very hot???
That's the app, thanks for the name.
http://www.virgilioborges.com.br/hyperpi/
http://www.virgilioborges.com.br/hyperpi/