Legit Reviews

Your ram CAN do 2-2-2-5 @ stock -> your best to give 2.7v or 2.8v to be sure When you set to 2-2-2-5 make sure to set the other timings to auto, you can lower them later. Try increasing the chipset voltage to 1.67 ~ 1.69v I did..but notthing different !!! :| It's true that my RAm can stabe 2-2-2-5 ...

thx...
I just want my OCZ run at 2-2-2-5 normally without OC'ing the FSB and DDR speed !! how can I do it..I tried 2.8v vdimm --> didn't work

P/S I just update my BIOS --->v623

I have the same sticks of ram (I won them here last year :)) They can OC upto ~ddr440 (220MHz) with 2.8v If I'm not overclocking they run stable with 2.65v (2-2-2-5) If your not overclocking use 2.7v and you should be fine (stable) Thant ram can take high voltage and overclock well (with 2-2-2-5) B...

thanks so much...

kenc51 wrote:If your ram is rated for 2-2-2-5 then it will be fine @ ddr400!!!

do you know which OCZ sticks your using?

Gold / VX / Platinum ?????

here is my DDR..Gold Edition

1GB (2x512) D/C Kit - OCZ4001024ELDCGE-K

I'm using OCZ Dual Chanel Kit in dimm 1 & 3, vdimm at default(2.8v), speed at default 200MHz ...I just set the timming to 2-2-2-5 cause I know my DDR can run at that timming...however..because I dun OC my OCZ so...will my OCZ stable ?

thx a lot

Please help me to find the best Opteron and Mainboard for OC'ing ??

cause I'm gonna buy new OPty PC :D


thx so much

thx 4 helping

When I install Driver 5.10 for my DFI LP nF3 UT 250gb...in my Device manager..I see "Built in Infrared Device" --> please help me to located in on my computer..!!
I dun use any Infrared device bought from shop !!

so..where is that infrared port ??

thx so much

Anyone got the lastest Driver for GeForce6800 Ultra NV48 code because the 81.98 driver does not support my card !!

THX somuch

Because when I install 81.98 Driver..It didnt work

thx so much ...!!

Driver fo this card is really difficult to find

BUt...my 6800Ultra is 256MB..I can't find any info about this card 'cause nVidia dont produce it any longer...

I've just bought a Nvidia 6800 Ultra VGA card..its GPU is NV48 !! with a price $ 255 USD. !!!

but I'm wonder that ...what are differences between NV40 and NV48 although they both Geforce 6800 Ultra ??

I use CoolerMaster eXtreme 380W PSU Dual

it has 24 pin motherboard connection...but my DFI Lanparty nF3 250 GB on ly have 20 PIN ...does my PSU fix to my mobo ??? I'm using it now..no probs but..in the future I dun know what's going on

I'm gonna buy a 9800 Pro card a 380 W PSU is enough ??
this my PSU

http://www.coolermaster.com/index.php?L ... wer%20380W

On many forums..people said that a mobo like DFI with nForce chip when using with Ati card will get BAD result !!! I dun really understand that idea ?? is it right ? cause I'm gonna buy an Ati card for my System below __________________ Athlon 64 3200+ NewCastle 2.2GHz @ 2.4 GHz (240x10) CoolerMaste...

I'm living in Vietnam so...a deal may be too deifficult

however thanks alot

I've tried my best to OC my RAM...Oh my god even set vdimm at 2.7, timming like you mentioned , divider at 9/10 to get 218 MHz...I can passed OCCT test but...out immediately when starting play game (GUN)..
finally I must OC my RAM by loosing the timming !!

GOd damm my Corsair

thx so much Ken I wont give up until I can't OC any more with my RAM