Legit Reviews

They are all the current system settings. I'm wondering if its something to do with the jumper on the MB I mentioed. Maybe I need to set that to 100, and then the bios to 133. Maybe together they are clashing. I shall try that also at the weekend.

and the bios page

http://www.whitehexagon.com/DSC05333.JPG

CPU-Z screenies: http://www.whitehexagon.com/cpu-z1.png http://www.whitehexagon.com/cpu-z2.png http://www.whitehexagon.com/cpu-z3.png http://www.whitehexagon.com/cpu-z4.png http://www.whitehexagon.com/cpu-z5.png http://www.whitehexagon.com/cpu-z5b.png I'm going to try some of the suggestions at the ...

The motherboard is set to 133 (jumper removed)
And the first bios setting is 100MHz, if I change that also to 133 it wont post.
That's with all the other settings as I mentioned above (inc 1:1 mem ratio) Strange eh?

I've listed my current bios setting a few posts up, but as mentioned, if I change the CPU to 133 the system wont post. Could this be some issue with the jumper on the mboard (CPU FSB Select)?? I disconnected it to give me 133MHz as the manual suggestes.

Cheers

Peter

Well I tried setting it to 1:1 and left the system testing for a full 24hrs. And yippee! it seems stable. No memory errors being reported. But... from the bios I now have: CPU clock 100MHz (on the mother board I have the jumper set to 133) Async PCI AGP CLK 33/66 Memory ratio 1:1 Ram Freq. 100MHz PC...

update: after wasting some effort burning knopix to get a bootable memtest86, I came across the fact that the DFI board has memtest86 built into the bios!! great stuff. So I ran the test with the system untouched. And 3 errors showed up in the >512MB range. So I then systematically tried each of the...

System still seems stable with 1 but unstable with 2 sticks. I read that the frequency mismatch (CPU 133) (Board 100) could be causeing this problem. So if anyone has the proper bios settings I need, that would be great. Otherwise, maybe a good memory diagnostic tool??

Hi All, I'm trying to get my desktop machine stable. It blue screens twice a day currently :( I contact DFI directly and they said it was because I have the wrong processor for my board so they can't support it. Basically I have the following: Intel Pentium m760 (133MHz FSB) DFI 855GME-MGF (CPU-Z re...