Legit Reviews

Good morning Dan, I was told by OCZ that the ‘QPI/DRAM Core Voltage at [1.69375]’ is extremely dangerous. In the past few days, I tried every combination while bringing my DRAM Frequency down until I finally got my pc stable. Below please see the final configuration for my stable pc: Ai Tweaker: 1- ...

InspectahACE if I increase my BCLK anymore I'll go above 2000. The way things are with me right now I don't think its a dandy idea.
Sepyx

OK 1.36v and 1.38 shutdown as soon as I started the test. 1.39v and 1.40 took slightly longer berfore shutdown but very slightly. I'm back at Auto. With Auto it took about couple of minutes before shutdown. How about CPU PLL Voltage? I ran the test again with Auto after about 10 minutes it shutdown....

OK I put at 1.36 but it turned red when I did that. Let you know what happens

Hi tried 1.35v and pc shutdown as soon as I started the test.

Hi,

I got a user name but I have no idea what to do next.

I need help please.

Hi Dan,

I got hold of Prime95 25.9 B4

I don't know what I did but the pc shutdown in just few seconds. I was looking for "round off error checking" in one of the drop-down menus at the top.

Any idea?

Sepx

Good morning Dan, Unfortunately, I don’t have any of those. The AI Tweaker for extreme edition is basically the same except for DRAM Frequency which I get 1066, 1333,1600, 1866, 2133 as choices. This time I did the Everest System Stability Test choices individually. 1- Stress System Memory: Using th...

Hi,

I have 8 pictures of Ai tweaker menu but don't know how to put it in my post.

Sepyx

Yes, I have ASUS PC Probe II While I was working on my PC it shutdown again with the following: 1- Ai Overclook Tuner [Manual] 2- CAS Latency [7] RAS to CAS delay [8] RAS PRE Time [7] RAS ACT Time [20] 3- CPU Ratio Setting [24] CPU 3.29GHz 4- BCLK Frequency [137] DRAM Frequency of 1922MHz 5- DRAM Bu...

Again no joy. I think it has to do with QPI/DRAM Voltage. With my old setting: 1- Ai Overclook Tuner [Manual] 2- CAS Latency [7] RAS to CAS delay [8] RAS PRE Time [7] RAS ACT Time [20] 3- CPU Ratio Setting [24] CPU 3.29GHz 4- BCLK Frequency [137] DRAM Frequency of 1922MHz 5- DRAM Bus Voltage [1.65] ...

No joy.

I tried RAM voltage 1.66v with QPI/DRAM voltage of 1.3

I didn't go to hell but the pc wouldn't even go to BIOS.

On the 3rd try it just reset the whole setting.

I'm back were I was before.

Any idea how to pass stress test?

Sepyx

Hello Dan, This morning I installed the OCZ memories. The first thing I did was to run Memtest86+ v2.11. After 45 minutes, they passed the test without any errors. Next I went to BOIS > Ai Tweaker. 1- I put the Ai Overclook Tuner to [Manual] 2- CAS Latency [7] RAS to CAS delay [8] RAS PRE Time [7] R...

Thanks Dan.

I'll wait for Apoptosis screen shots before I start my adventure.

Thanks Apoptosis.

Please let me know when you put the screen shots up.

Sepyx

I have 1066, 1333,1600, 1866, 2133 as choices LegitReviews did a review written by Brian Wallace on the OCZ Blade DDR3 6GB 2000MHz Memory http://www.legitreviews.com/article/956/1/ The motherboard was ASUS P6T Deluxe OC Palm which I think it should be similar to my ASUS P6T Deluxe. How was the mothe...

Hi Dan, To make you even more upset I don't even play games. In fact this is my first desktop. I always used IBM Thinkpad (over 12 years) for financial work which costs about the same as this! I use this system for DNS Pro which requires a lot of CPU power and photoshop. As I mentioned I will upgrad...

Hi, I'm not a technical person. My system is: INTEL CORE I7 965 EXTREME EDITION 3.2GHZ ASUS P6T DELUXE I7 X58 MOTHERBOARD CRUCIAL 6GB (3X2GB) DDR3 PC3-8500 2 X NVIDIA GEFORCE GTX 285 1GB PCIE WD VELOCIRAPTOR 300GB 10KRPM SATA (C drive) 2 X WD 1002FBYS WD RE3 1 TB 7200RPM MICROSOFT WINDOWS XP PRO SP3...