Post Your Rig!

[TexasScott]

I posted this modded HAF 922 a while back...I changed out all the hardware,did more cable management and added more lighting so I figured I would post it again..


By scott38 at 2010-06-02


By scott38 at 2010-06-02


By scott38 at 2010-06-02

Thank for looking........

[rrplay]

Here is my rather dated pc ,& def look forward to building a new one.




Mainboard: MSI K7N2G-LISR[6570]
Chipset: NVIDIA nForce2 Ultra 400 Chipset + MCP-T
Processor:AMD Athlon XP 2200+
Ram: 2GB PC2700
HDD:3 160GB Western Digital [multi-boot w/various OS]
Graphics: NVIDIA G73 [GeForce 7600 GS] [AGP]
Monitor: 19" Viewsonic A90f+
OpticaLl Drives: MSI DVD burner LITE-ON LTR-52246S generic multicad reader
Sound: On board nVidia nForce2 Realtek ALC650 6-channel audio Dolby Digital 5.1
Speakers: Monsoon Planar Media 9 [akaPM9's] really like these a lot!! [too bad they do not make them anymore]
PSU: Generic 450W
Case: Lian Li PC-7

[DJ Tucker]

Here is my rather dated pc ,& def look forward to building a new one.




Mainboard: MSI K7N2G-LISR[6570]
Chipset: NVIDIA nForce2 Ultra 400 Chipset + MCP-T
Processor:AMD Athlon XP 2200+
Ram: 2GB PC2700
HDD:3 160GB Western Digital [multi-boot w/various OS]
Graphics: NVIDIA G73 [GeForce 7600 GS] [AGP]
Monitor: 19" Viewsonic A90f+
OpticaLl Drives: MSI DVD burner LITE-ON LTR-52246S generic multicad reader
Sound: On board nVidia nForce2 Realtek ALC650 6-channel audio Dolby Digital 5.1
Speakers: Monsoon Planar Media 9 [akaPM9's] really like these a lot!! [too bad they do not make them anymore]
PSU: Generic 450W
Case: Lian Li PC-7

Just a little out dated but then thats still not a bad pc for general use and some latest games on slow settings

[Athlonite]

a wee bit of silver gel pen makes the ole Tuniq tower stand out, I've also replaced the Hiper TypeR 580 with an SilverStone ST75F-P 750W full modular PSU and the CPU is now an AMD Phenom II X4 940 BE

[Khaled G]

That's it for now !

[DJ Tucker]

not a bad system Khaled but you need to clean that out as the dust is not too bad but noticable also can you post the specs as you can't tell to easy from those pics

[Athlonite]

not a bad system Khaled but you need to clean that out as the dust is not too bad but noticable also can you post the specs as you can't tell to easy from those pics

and some cable management would also make it look a bit better aswell

[DJ Tucker]

not a bad system Khaled but you need to clean that out as the dust is not too bad but noticable also can you post the specs as you can't tell to easy from those pics

and some cable management would also make it look a bit better aswell

well said

[lifeskills]

New here fellas, heres my sweety:

AMD Phenom II 1090T
Corsai H50
MSI 890FXA-GD70
8Gb Kingston HyperX 1600mhz
XFX HD5850 (x2)
Corsair HX850
Cooler Master Storm Scout
Samsung Spinpoint f3

[SunSonik]

Hello!

lifeskills, very sweet!

Nothing special, just my rig
I know... need some cable management but it does not bother me, I'll do this later
Cpec in signature / Pic clickable / This is old photo, but anyway


update coming: GTX580 / PS 1000W (maybe next month)

[Sparky]

Here is my newest project. Just finished installing Windows, need to install some benchmarks and play with it a bit.

[Khaled G]

Specs:

Processor: intel Core 2 Extreme QX6700 @ 2.66 GHz (10 x 266 MHz), Reference Cooling.
Motherboard: Gigabyte GA-965P-DQ6 (rev 1.0)
Memory: Corsair CM2X10246400C4 4-4-4-12 (2 x 1GB DDR2 800 MHz)
Graphics: ASUS EN8800GTX 768MB DX10
HDD 1: Western Digital WD5000AAKS 500 GB 16MB Cache SATAII 3GB/s
HDD 2: Samsung 750GB
Optical Drive: ASUS DVD-RW Supermulti SATA
Sound: Creative SB X-Fi Fatality with Front I/O
Case: Thermaltake Armour VA8003BWS (Cable management not supported)
Power Supply: BFG 800 Watt, HEC Cougar 750 Watt, Cougar 700 Watt (the First 2 Died)
Display: LG L194WT |19"| 16:10 | 1440 x 900 | DVI-D
Keyboard: Logitech G15
Mouse: Logitech G5
OS: Win 7 Pro x64

It really Doesn't matter for me to do cable management as it is almost impossible without a Chassis that supports cable management and the temps never exceeds 75C

Dust? I Clean it every 6 months. Why? Because 1- I'm Lazy 2- I Tear the Rig apart every cleaning session.

[Rcat]

I7 [email protected],EVGA X58 CLASSFIED 760,CORSAIR H-50,CORSAIR TR3X6G1600 X2,3X EVGA GTX275,COOLMASTER 1250,REVO X2 160 SSD,2X 150 RAPTORS RAID 0,SILVERSTONE RAVEN II,WINDOWS 7 ULT 64

[Athlonite]

It really Doesn't matter for me to do cable management as it is almost impossible without a Chassis that supports cable management and the temps never exceeds 75C

Dust? I Clean it every 6 months. Why? Because 1- I'm Lazy 2- I Tear the Rig apart every cleaning session.

To increase the Lazyness factor buy some ALU mesh fan filters you'll get an extra 3~4 months before needing to clean

[Khaled G]

It really Doesn't matter for me to do cable management as it is almost impossible without a Chassis that supports cable management and the temps never exceeds 75C

Dust? I Clean it every 6 months. Why? Because 1- I'm Lazy 2- I Tear the Rig apart every cleaning session.

To increase the Lazyness factor buy some ALU mesh fan filters you'll get an extra 3~4 months before needing to clean

Wouldn't that raise the temps inside as the air flow will decrease a little bit ???

[Athlonite]

It really Doesn't matter for me to do cable management as it is almost impossible without a Chassis that supports cable management and the temps never exceeds 75C

Dust? I Clean it every 6 months. Why? Because 1- I'm Lazy 2- I Tear the Rig apart every cleaning session.

To increase the Lazyness factor buy some ALU mesh fan filters you'll get an extra 3~4 months before needing to clean

Wouldn't that raise the temps inside as the air flow will decrease a little bit ???

Not that I've seen they're pretty free flowing and the benefits out-way the possible drawback of an 0.5c rise in temps and a quick vacuuming once a month keeps them clean enough to enable you not to have to pull it all apart and dust/clean the insides

[InspectahACE]

Got rid of the previous stuff, kept the case but added newer hardware...

[lordvic]

InspectahACE, nice touch with the red covers! Did you paint them or can u buy them somewhere?
I might steal your idea...

[InspectahACE]

InspectahACE, nice touch with the red covers! Did you paint them or can u buy them somewhere?
I might steal your idea...

I did the paint job. It turned out way better than I thought...especially since I painted them over a year ago.

[Major_A]

The Vegas air probably helped. Painting something "in the backyard" here is a huge PITA. It's either too hot or the humidity is too high. Either way the paint usually doesn't do what you really want it to do.