checkitout

[stopthekilling77]

referring to my thread over here bout photoshop: http://forums.legitreviews.com/viewtopi ... highlight=

this is the build i've come up with

case w/powersupply: COOLER MASTER Centurion RC-534-SKR5 Silver Aluminum & Mesh bezel, SECC chassis ATX Mid Tower Computer Case 430W Power Supply

mobo: ASUS M2N4-SLI Socket AM2 NVIDIA nForce 500 SLI MCP ATX AMD Motherboard

processor: AMD Athlon 64 X2 3800

ram (4 sticks): G.SKILL 1GB 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400)

vid card: EVGA 512-P2-N548-TX GeForce 7600GS 512MB 128-bit GDDR2 PCI Express x16 Video Card


that PSU gonna hold all this together, or am i going to have to make this a non-budget board and buy one separate?

[setscrew]

The included power supply providing 19 amperes on the twelve volt rail should be sufficient for the assemblage of components listed. You will run into a power issue if you upgrade the video card to a more robust offering, but you can tackle that limitation if and when you upgrade the video.

Another slight issue would be running four sticks as I believe that you will default to a 2T command rate. You may want to install two 2 gigabytes modules so that a 1T command rate would be available.

http://www.newegg.com/Product/Product.a ... 6820231122

http://www.newegg.com/Product/Product.a ... 6820231112

http://www.newegg.com/Product/Product.a ... 6820220230

http://shop3.outpost.com/product/520060 ... IN_RSLT_PG

http://shop1.outpost.com/product/522433 ... IN_RSLT_PG

Good luck.