Post Your Rig!

bhelms · Post by **bhelms** » Sun Mar 08, 2009 11:37 am

Built this one a couple months ago. The best cable management I've never done

My last case was horrible. When I showed Dan, he said it could be better, of course. I'm pretty dang proud of myself though

Skippman · Post by **Skippman** » Sun Mar 08, 2009 1:02 pm

Thought that was my rig for half a second! LMAO

XstollieX · Post by **XstollieX** » Sun Mar 08, 2009 1:15 pm

Thats nice looking Skippman. Very Clean

ibleet · Post by **ibleet** » Sun Mar 08, 2009 8:11 pm

Damn, you guys are masters at cabling!

Major_A · Post by **Major_A** » Sun Mar 08, 2009 8:35 pm

I couldn't stand to have some of your cases. I don't even have my HDD activity and Power LEDs hooked up and I used electrical tape to cover up the glowing X-Fi logo on my sound card.

To each their own. If we all liked the same thing the world would be a pretty damn boring place.

DaIceMan · Post by **DaIceMan** » Sun Mar 08, 2009 9:18 pm

Major_A wrote:I couldn't stand to have some of your cases. I don't even have my HDD activity and Power LEDs hooked up and I used electrical tape to cover up the glowing X-Fi logo on my sound card.

To each their own. If we all liked the same thing the world would be a pretty damn boring place.

My 900 came with the blue LED fans in the front, which was made worse when I added the 3rd drive cage/LED fan. The case is currently in the tear down stage of a rebuild with cable management holes, paint, and new non-LED fans. I have yet to decide if I'll go with LED strips inside the case for showing off at LAN parties and such, but for everyday use in the room I sleep in... the blue LEDs have got to go.

stopthekilling77 · Post by **stopthekilling77** » Sun Mar 08, 2009 10:23 pm

DaIceMan wrote:[....]the blue LEDs have got to go.

I unplugged my HDD LED on the P-180B only a month or two after my original build. I refuse to put my case on the ground, and the glaring/flashing light out of the corner of my eye was enough to make me want to scream!

Skippman · Post by **Skippman** » Mon Mar 09, 2009 7:56 am

XstollieX wrote:Thats nice looking Skippman. Very Clean

Thanks bro. I just realized that pic's old too as I'm now running the twin GPU's a RAID 0 setup.

On the LED thing, if it were in my bedroom yeah, it'd drive me nuts. But it's in my office in another room in the house so it's not a big deal. The CCT's used to have a switch on them but I cut it out to clean up the wiring.

Bio-Hazard · Post by **Bio-Hazard** » Mon Mar 09, 2009 9:43 am

Skip,
I know that I've seen that rig somewhere before, I just can't seem to remember where...............

Looks like you're getting the wiring under control as well.

Good job.

Skippman · Post by **Skippman** » Mon Mar 09, 2009 10:05 am

Bio,

I'm gonna have to pay you another visit either this summer or fall when I build my i7 rig into that Corsair case. I'll wanna pick your brain for OC'ing it since you seem to have more i7 exp than anyone else here except Nate.

InspectahACE · Post by **InspectahACE** » Mon Mar 09, 2009 1:04 pm

Skippman wrote:Bio,

I'm gonna have to pay you another visit either this summer or fall when I build my i7 rig into that Corsair case. I'll wanna pick your brain for OC'ing it since you seem to have more i7 exp than anyone else here except Nate.

and I'll wanna pick your brain after you're done with his

I like the profile setting my mobo has for the OC'ing but it takes my ram speed down to compensate i guess... so I want to OC without downclocking the ram as much as possible and im next to dumb on doing that with an i7..i like doing 3.2ghz but i don't like how my ram went from 1600 to 1100 doing that lol..i feel like a pre-schooler now since I not know how to OC this thing right

Bio-Hazard · Post by **Bio-Hazard** » Mon Mar 09, 2009 2:24 pm

In most Aus bios all you have to do to adjust the memory speed is go to the Ai Tweaker section and then down to DRAM Frequency. hit return and the options should come up.

Post by **Apoptosis** » Mon Mar 09, 2009 2:31 pm

yeah like BIO said in the post above it's just a couple things that you can alter to change the memory clock frequency, so it's quick and easy.

InspectahACE · Post by **InspectahACE** » Mon Mar 09, 2009 4:09 pm

Coolness...Thank guys

i was only using the Cpu Level up profiles at first..now i know not to lol..too bad my room was too warm for the OC..just means i need to get up and get a new cooler for this thing

martini161 · Post by **martini161** » Mon Mar 09, 2009 5:09 pm

that fill port looks out of place skip. you should just jam a double a battery in there instead

Skippman · Post by **Skippman** » Mon Mar 09, 2009 5:17 pm

martini161 wrote:that fill port looks out of place skip. you should just jam a double a battery in there instead

I hate you.

Just wait for Warmachine 2.0, coming this fall!

Sowser · Post by **Sowser** » Wed Mar 25, 2009 10:30 pm

Here are the parts I started with...

: Bits & Pieces.jpg (128.86 KiB) Viewed 9586 times

I'm using it as a movie server so I wanted some high capacity...

: Racked Hard Drives.jpg (63.22 KiB) Viewed 9586 times

I had to do some mounting to get the GSkill Titan where I wanted it...

: GSkill SSD.jpg (39.82 KiB) Viewed 9585 times

Sowser · Post by **Sowser** » Wed Mar 25, 2009 10:35 pm

I installed the six 1 TB Western Digital Caviar Greens on the bottow and in the SATA ports and the GSkill up top in one of the SAS ports...

: Hard Drives Installed.jpg (122.3 KiB) Viewed 9580 times

Almost everything is in place just some wiring to do...

: Getting There.jpg (94.6 KiB) Viewed 9581 times

I decided to use the CoolIt Domino after reading the review posted here. Here it is with the thermal paste removed...

: Domino.jpg (77.1 KiB) Viewed 9581 times

Sowser · Post by **Sowser** » Wed Mar 25, 2009 10:46 pm

Everything installed, up, and running...

: Guts.jpg (102.28 KiB) Viewed 9577 times

Here's a shot from the side...

: Face Shot.jpg (58.96 KiB) Viewed 9577 times

And with the cover on...

: Covered.jpg (93.84 KiB) Viewed 9575 times

The final specs ended up being:
Core I7 920
ASUS P6T Deluxe
6 GB OCZ 1600 Gold RAM
Sapphire 4850 X2 2GB GPU
850W Corsair PSU
6 1TB WD Greens
128GB GSkill Titan
LD Blue DVD/Blue Ray drive
CoolIt Domino Cooler
Antec 1200 Case
Logitech G7 Wireless Mouse
Logitech Pro 2000 Wireless Keyboard
Vista 64 Ultimate
32LG60 Scarlet 1080P TV for monitor

Skippman · Post by **Skippman** » Thu Mar 26, 2009 6:20 am

CASE... TO HEAVY... CANT... MOVE IT...!

Looks nice bro!

Legit Reviews

Post Your Rig!

Re: Post Your Rig!

Re: Post Your Rig!

Re: Post Your Rig!

Re: Post Your Rig!

Re: Post Your Rig!

Re: Post Your Rig!

Re: Post Your Rig!

Re: Post Your Rig!

Re: Post Your Rig!

Re: Post Your Rig!

Re: Post Your Rig!

Re: Post Your Rig!

Re: Post Your Rig!

Re: Post Your Rig!

Re: Post Your Rig!

Re: Post Your Rig!

Re: Post Your Rig!

Re: Post Your Rig!

Re: Post Your Rig!

Re: Post Your Rig!