Legit Reviews

I want to clock my pc but i cant go further than this,,maybe i do something wrong therfor i ask here.

My specs are

Msi x48c plat
Corsair 2 gb 1600 mhz
E8500 intel 3.16
Ati 4870 1 gb
Win xp pro

My current clock is
3.33 ghz and 1400 mhz ddr3 ram
leaving this option on bios

Fsb cpu 350 (3333)
Cpu ratio 9.5
Volt auto

Fsb ratio dram 1:2.0 ( auto) 1400 mhz
mem volt 1.83
Spread spectrum enable

When i go higher then i get a black screen on boot up and i must reset bios

the first thing to try is raising your vcore. you may want to read grayskys overclocking guide in the intel section http://forums.legitreviews.com/about10789.html

Ok thx but i was seaching fo rpeople that have tryed to clock with similar specs because atm i cant clock due to unstability..even boot on black screen and trash

Even with people with the same hardware you won't be able to use their settings as no two systems are the same and they will behave differently during overclocking.

All you can do is learn up on the techniques (the guide martini mentioned is a great start) and play with everything till you find something that works.

Dan

First thing you need to do is turn off the Auto voltage feature. Before I really started OCing my systems I would leave that feature on. After reading around and playing with my settings I realized that it was generally supplying A LOT more voltage than is required.

So in summation...
1. Read the OCing guide posted
2. Turn off the Auto voltage feature.