Page 1 of 1
Ram Supported Frequency
Posted: Thu Apr 15, 2010 12:16 pm
by Cairtorm
Noob question? Yes
You see that it says: Supported Frequencies... Why would it be running at lower frequency (533 instead of 609) if it can run at a higher?
Does this mean that I can change it?
Code: Select all
Property Value
(Acer Aspire 5740)
Memory Summary
Maximum Capacity 16384 MBytes
Memory Slots 4
Error Correction None
Manufacturer Samsung
Capacity 2048 MBytes
Memory Type DDR3
Speed 533 MHz (DDR3 1066)
Supported Frequencies 457.1 MHz, 533.3 MHz, 609.5 MHz
Memory Timings 6-6-6-18-24 at 457.1 MHz, at 1.5 volts (CL-RCD-RP-RAS-RC)
Memory Timings 7-7-7-20-27 at 533.3 MHz, at 1.5 volts (CL-RCD-RP-RAS-RC)
Memory Timings 8-8-8-23-31 at 609.5 MHz, at 1.5 volts (CL-RCD-RP-RAS-RC)
I am the player, that likes playing, but understands nothing about CPU's!
Re: Ram Supported Frequency
Posted: Thu Apr 15, 2010 6:09 pm
by Slowflow
Yes, you are new to this, aren't ya!
Supported frequencies = what the motherboard supports, in terms of memory speeds.
Your Current ram speed is 533Mhz x2 = 1066 DDR3
609.5 x2 = 1219Mhz , which I believe is an overclocked 1066Mhz profile?
Hope that helps.
Regards,
Slowflow
Re: Ram Supported Frequency
Posted: Thu Apr 15, 2010 10:15 pm
by RadMos
Probably can be improved a bit more with memset.
Re: Ram Supported Frequency
Posted: Fri Apr 16, 2010 3:58 am
by Cairtorm
Well... I have been using computers for a LONG time... But I have never really looked into technical details, I always had my brother who understood a bit more to give me advice when I mounted my own "gaming" PC, and I didn't change frequencies or overclock anything, but I can still assemble a desktop if given all the components (Notebooks are harder, but if you get a mounted one and disassemble it's easy to reassemble it even the HP nightmare with 327753272 screws all over the place)
And I'm fighting to understand about ATI stuff, I have always used Nvidia and the driver stuff for it is pretty simple... Now I have this ATI Mobility, and I was trying to get a fix for the extreme loading time on BFBC2... But it seems to have come out some 10.4 fix, and I was thing that that was just Catalyst program version and not the drivers itself, and that I could use it but I apparently can't. So I had to reinstall my 8.62 (I think)... There are rumors that there is a new 8.74 (or whatever) which is still beta...
So, out of the bible I wrote above... Should I try changing the memory frequency?
And about the ATI stuff, Mobility series doesn't use the 10.x series? I should only search for 8.x series?
* I'm actually completely lost here, because now I see on other places: "Catalyst 10.x BETA (8.74 April 6/10) Win All "
Great...