Help with conf. display on monitor

Linkman · Post by **Linkman** » Fri Jan 20, 2006 8:05 am

Hi all my youg cousin play with integrated menu on my monitor and he changed my monitor settings

i want to know correct config of my display and there are these data what i need to know:

H.SIZE
H.POSITION
V.SIZE
V.POSITION
PUNCUSHION
TRAPEZOID
PARALLEL
PUN BALANCE
TOP CORNER
BTM CORNER
H.LINEARITY
V.LINEARITY

I have Image Quest Q770 monitor and i want to correct my display

Post by **Illuminati** » Fri Jan 20, 2006 8:12 am

A lot of it is trial and error... with monitor settings, you'll have to just play with the settings and watch how it changes the screen shape. And keep going through them until you get the shape the way it suits you best.

Usually the monitor menu will have little shapes associated with how that setting distorts the image... so those may give you an idea on what each setting does.

If you want a starting point, I would be willing to guess that each of those settings is set to the center or midpoint value on the scale by default... so I would start there and see what the screen looks like, then adjust accordingly.

Hope this helps!

kenc51 · Post by **kenc51** » Fri Jan 20, 2006 9:41 am

You can try a monitor test prog.....it will show various vertical/horizontal lines and colors => it's usefull to get your adustments correct

try this link
http://www.monitortest.net/monitortest.asp

there are others -> google's your friend
hope this helps!