New Custom Water Cooled Loop

This is the place to discuss the latest computer hardware issues and technology. Please keep the discussion ON TOPIC!
User avatar
DJ Tucker
Legit Extremist
Legit Extremist
Posts: 1502
Joined: Tue Dec 30, 2008 11:52 am
Location: Hardbase Headquaters
Contact:

New Custom Water Cooled Loop

Post by DJ Tucker »

As the title says I am doing a custom loop with gpu and cpu block a single 360 copper rad reservoir and pump standalone not integrated. This is the pump I am using.

https://www.aliexpress.com/item/SPD10-S ... 4c4dpeNnbv

As you can see the pump has 3 ports. Is it possible to have res connected to the top on the pump and the 2 outlets used to split the flow to gpu and cpu then have a T fitting to reconnect the gpu and cpu flow and into the rad? I want to do this so gpu and cpu have their own flow and not to share, although I know I will have reduced flow to each component in the process :)

Thanks in advance.
MSI Z590 Gaming Edge Wifi
Core i7 10700KF 5Ghz @ 1.25v With Alphacool Eisblock XPX Aurora Edge
Gigabyte RTX 2080 Super 1980Mhz @ 0.925v With TechN GPU Block
32Gb Corsair Vengeance RGB Pro 3600Mhz 16-18-18-38
Aqua Computer Ultitube 200 Pro D5 Next
Corsair XR5 240mm x2 & 360mm
Intel 670p 2Tb & WD Blue M.2 2Tb
Corsair HX1000i
Philips Momentum 3000 24" (Main) & MSI Optix G241V E2 (Second)
Lian Li O11D
Roccat Vulcan 120 Aimo, Roccat Kone Aimo Remastered and Roccat Sym Pro Air
User avatar
KnightRid
Moderator
Moderator
Posts: 4295
Joined: Wed Dec 14, 2005 5:21 am
Location: Dallastown, PA

Re: New Custom Water Cooled Loop

Post by KnightRid »

The problem I see is that if you have 3 hoses all the same size and try to take 2 of those flows into one, you will get a massive bottleneck and reduce flow significantly to everything and will compromise cooling. Might help if you have dual rads to run the flow through separate and then rejoin the flow but it will still be a lot less effective I would think.

I am no expert so hopefully someone with more knowledge will chime in.
Remember, I am opinionated and nothing I say or do reflects on anyone or anything else but me :finga:
User avatar
DJ Tucker
Legit Extremist
Legit Extremist
Posts: 1502
Joined: Tue Dec 30, 2008 11:52 am
Location: Hardbase Headquaters
Contact:

Re: New Custom Water Cooled Loop

Post by DJ Tucker »

Well I have decided to go 1in and 1 out for safety. so flow order is :

res>pump>gpu>cpu>360rad>res

All in all it has cost me £280 from £407. Ok so I used aliexpress for the gpu block, cpu block, pump and res. but all the parts I got was already on my ebay listing and yet was £70 less on aliexpress for the same parts here in the uk. They have all come from formulamod which I have used a few times outside of aliexpress. The hose, coolant, fittings and radiator came from uk and thanks to black Friday I saved an additional £57 on top of the £70 I saved using aliexpress :shock:

Reservoir - https://www.aliexpress.com/item/Blue-co ... 4c4d2sFZER


CPU Block - https://www.aliexpress.com/item/Barrow- ... 4c4d2sFZER

Pump - https://www.aliexpress.com/item/Barrow- ... 4c4d2sFZER

GPU Block - https://www.aliexpress.com/item/Barrow- ... 4c4d2sFZER

Radiaitor - https://www.overclockers.co.uk/magicool ... 28-ma.html

Coolant - https://www.watercoolinguk.co.uk/p/XSPC ... 29660.html
MSI Z590 Gaming Edge Wifi
Core i7 10700KF 5Ghz @ 1.25v With Alphacool Eisblock XPX Aurora Edge
Gigabyte RTX 2080 Super 1980Mhz @ 0.925v With TechN GPU Block
32Gb Corsair Vengeance RGB Pro 3600Mhz 16-18-18-38
Aqua Computer Ultitube 200 Pro D5 Next
Corsair XR5 240mm x2 & 360mm
Intel 670p 2Tb & WD Blue M.2 2Tb
Corsair HX1000i
Philips Momentum 3000 24" (Main) & MSI Optix G241V E2 (Second)
Lian Li O11D
Roccat Vulcan 120 Aimo, Roccat Kone Aimo Remastered and Roccat Sym Pro Air
User avatar
KnightRid
Moderator
Moderator
Posts: 4295
Joined: Wed Dec 14, 2005 5:21 am
Location: Dallastown, PA

Re: New Custom Water Cooled Loop

Post by KnightRid »

Gonna be nice. I cant wait for some pics!!!
Remember, I am opinionated and nothing I say or do reflects on anyone or anything else but me :finga:
User avatar
DJ Tucker
Legit Extremist
Legit Extremist
Posts: 1502
Joined: Tue Dec 30, 2008 11:52 am
Location: Hardbase Headquaters
Contact:

Re: New Custom Water Cooled Loop

Post by DJ Tucker »

finally formulamod has sent out my parts and should receive them before Christmas but alas I wont be able to get the new system up and running until the new year :(
MSI Z590 Gaming Edge Wifi
Core i7 10700KF 5Ghz @ 1.25v With Alphacool Eisblock XPX Aurora Edge
Gigabyte RTX 2080 Super 1980Mhz @ 0.925v With TechN GPU Block
32Gb Corsair Vengeance RGB Pro 3600Mhz 16-18-18-38
Aqua Computer Ultitube 200 Pro D5 Next
Corsair XR5 240mm x2 & 360mm
Intel 670p 2Tb & WD Blue M.2 2Tb
Corsair HX1000i
Philips Momentum 3000 24" (Main) & MSI Optix G241V E2 (Second)
Lian Li O11D
Roccat Vulcan 120 Aimo, Roccat Kone Aimo Remastered and Roccat Sym Pro Air
User avatar
KnightRid
Moderator
Moderator
Posts: 4295
Joined: Wed Dec 14, 2005 5:21 am
Location: Dallastown, PA

Re: New Custom Water Cooled Loop

Post by KnightRid »

DJ Tucker wrote:finally formulamod has sent out my parts and should receive them before Christmas but alas I wont be able to get the new system up and running until the new year :(
It's like a cliffhanger season ending episode of your favorite show! AHHHHHHHHHHHH :shock:
Remember, I am opinionated and nothing I say or do reflects on anyone or anything else but me :finga:
User avatar
DJ Tucker
Legit Extremist
Legit Extremist
Posts: 1502
Joined: Tue Dec 30, 2008 11:52 am
Location: Hardbase Headquaters
Contact:

Re: New Custom Water Cooled Loop

Post by DJ Tucker »

I know right. I have been checking the delivery status everyday even though I know it would not of changed yet. It's like waiting for a reveal of your fav show so you know the date it will be starting again. I'm sat on the edge waiting ever so impatiently for the arrival and full day disassemble and reassemble of the loop :shock:

its that bad that I have even made arrangements for the kids to go out for the day with a family member on the day before it arrives. My delivery company has ensured me I will be informed the day before it's due to be delivered so I can make kids arrangements :lol:
MSI Z590 Gaming Edge Wifi
Core i7 10700KF 5Ghz @ 1.25v With Alphacool Eisblock XPX Aurora Edge
Gigabyte RTX 2080 Super 1980Mhz @ 0.925v With TechN GPU Block
32Gb Corsair Vengeance RGB Pro 3600Mhz 16-18-18-38
Aqua Computer Ultitube 200 Pro D5 Next
Corsair XR5 240mm x2 & 360mm
Intel 670p 2Tb & WD Blue M.2 2Tb
Corsair HX1000i
Philips Momentum 3000 24" (Main) & MSI Optix G241V E2 (Second)
Lian Li O11D
Roccat Vulcan 120 Aimo, Roccat Kone Aimo Remastered and Roccat Sym Pro Air
User avatar
camaroguy1998
Legit Extremist
Legit Extremist
Posts: 1899
Joined: Sun Jan 07, 2007 5:24 pm
Location: St. Charles, Mo.

Re: New Custom Water Cooled Loop

Post by camaroguy1998 »

DJ Tucker wrote:I know right. I have been checking the delivery status everyday even though I know it would not of changed yet. It's like waiting for a reveal of your fav show so you know the date it will be starting again. I'm sat on the edge waiting ever so impatiently for the arrival and full day disassemble and reassemble of the loop :shock:

its that bad that I have even made arrangements for the kids to go out for the day with a family member on the day before it arrives. My delivery company has ensured me I will be informed the day before it's due to be delivered so I can make kids arrangements :lol:

:lol: :lol: :lol:
ASUS AM4 TUF Gaming X570-Plus (Wi-Fi)
AMD 3400G - 32G GSkill RipJaw V - {Win10} Pro 64bit, Win11 Update
Corsair H100i RGB PRO XT 240mm AIO Cooler
Corsair RM750X PSU - Corsair Force MP600 M.2 2280 1TB SSD
ASUS 27" LED LCD monitor - Lepai 2x20W Amp - Dayton B652 Spkrs

Corsair 4000D Airflow
User avatar
KnightRid
Moderator
Moderator
Posts: 4295
Joined: Wed Dec 14, 2005 5:21 am
Location: Dallastown, PA

Re: New Custom Water Cooled Loop

Post by KnightRid »

That is so awesome LOL
Remember, I am opinionated and nothing I say or do reflects on anyone or anything else but me :finga:
User avatar
DJ Tucker
Legit Extremist
Legit Extremist
Posts: 1502
Joined: Tue Dec 30, 2008 11:52 am
Location: Hardbase Headquaters
Contact:

Re: New Custom Water Cooled Loop

Post by DJ Tucker »

ok so I have received all the fittings and coolant but still waiting on the gpu and cpu blocks, reservoir and pump. should be next by next Friday according to estimate delivery from supplier.
MSI Z590 Gaming Edge Wifi
Core i7 10700KF 5Ghz @ 1.25v With Alphacool Eisblock XPX Aurora Edge
Gigabyte RTX 2080 Super 1980Mhz @ 0.925v With TechN GPU Block
32Gb Corsair Vengeance RGB Pro 3600Mhz 16-18-18-38
Aqua Computer Ultitube 200 Pro D5 Next
Corsair XR5 240mm x2 & 360mm
Intel 670p 2Tb & WD Blue M.2 2Tb
Corsair HX1000i
Philips Momentum 3000 24" (Main) & MSI Optix G241V E2 (Second)
Lian Li O11D
Roccat Vulcan 120 Aimo, Roccat Kone Aimo Remastered and Roccat Sym Pro Air
User avatar
DJ Tucker
Legit Extremist
Legit Extremist
Posts: 1502
Joined: Tue Dec 30, 2008 11:52 am
Location: Hardbase Headquaters
Contact:

Re: New Custom Water Cooled Loop

Post by DJ Tucker »

It has taken until the 10th jan to receive all my parts. I noticed from my formulamod parts I also ordered 2 1/4" threaded and barbed fitting for the rad that they didn't send and instead sent me 2 double ended barb fittings with a little extra tubing so I can make the same config. I wasn't to fussed but it added a little extra length to my rad on one side but I made do with it as this has taken 58 days to arrive. This is what I had to do in the end.

Image

I then noticed the reservoir was the right colour and size but both end caps was meant to be the same so I could have the cold cathode and an inlet and outlet on either end reducing my hosed length and reduce turbulence in the res for safety, but none the less I ditched the uv cold cathode so I could use the 1/4" cold cathode inlet as an outlet like I wanted.

Image

I then had an issue with the pump after i put it together. It wasn't pushing hard enough to move any water. I spent like an hour to finally realise the manual rgb controller was the culprit and alas the pump started flowing at full speed (no led :() without problem once the controller was removed. This is how I ended up installing my pump.

Image

Finally all was well and my system was up and running. I did 2 hours leak testing and all was sealed beautifully. so I turned the system on and tested the cpu temp and gpu temp to see what improvement if any was gained. CPU got 30 idle and 55c on hottest core (49c, 55c, 53c, 49c) 2c lower on all cores vs previous aio. gpu was idle 28c but :cry: load hit 92c instantly so I quit the benchmark. I drained the system reseated the gpu block and got 75c stable and it remained there after 2 more reseats. I contact formula mod and told them about it and they said a refund would be given upon receiving the gpu block including delivery both ways. This was the GPU block I used that was the culprit.

Image

I then purchased the ek-fc 1070 gpu block and installed it on the 11th jan. Fantastic I was getting 42c max gpu temp. Even vrms was only hitting 65c over 88c on previous block and 79c on previous aio. This is how the EKWB GPU block is installed.

Image

So here is my fully install system. Not the greatest as not everything went to plan and a few adjustments had to be made but I like it for my first custom build.

Image
Image
Image

A few things I will improve in the next few months:
1: Shorten the 180 degree radiator tubing to make it more flush and straight.
2: Move reservoir one screw fix point to straighten the radiator to reservoir tubing.
3: Move pump up a little and add a 45 degree compression fitting to remove the arch tubing from pump to GPU block and make it straight.
4: Add red led's to GPU block, move fan and RGB hubs to a better locations out of sight and more cable management where possible.

Thanks for taking the time to check out my new custom loop. I hope in the next few months I will get the rest of my above list done and upload the finally finished look [-o<
MSI Z590 Gaming Edge Wifi
Core i7 10700KF 5Ghz @ 1.25v With Alphacool Eisblock XPX Aurora Edge
Gigabyte RTX 2080 Super 1980Mhz @ 0.925v With TechN GPU Block
32Gb Corsair Vengeance RGB Pro 3600Mhz 16-18-18-38
Aqua Computer Ultitube 200 Pro D5 Next
Corsair XR5 240mm x2 & 360mm
Intel 670p 2Tb & WD Blue M.2 2Tb
Corsair HX1000i
Philips Momentum 3000 24" (Main) & MSI Optix G241V E2 (Second)
Lian Li O11D
Roccat Vulcan 120 Aimo, Roccat Kone Aimo Remastered and Roccat Sym Pro Air
User avatar
KnightRid
Moderator
Moderator
Posts: 4295
Joined: Wed Dec 14, 2005 5:21 am
Location: Dallastown, PA

Re: New Custom Water Cooled Loop

Post by KnightRid »

Looks really sweet man!

All that time to get everything though. I would have been going insane and calling every day to find out what the hell they were doing lol
Remember, I am opinionated and nothing I say or do reflects on anyone or anything else but me :finga:
User avatar
camaroguy1998
Legit Extremist
Legit Extremist
Posts: 1899
Joined: Sun Jan 07, 2007 5:24 pm
Location: St. Charles, Mo.

Re: New Custom Water Cooled Loop

Post by camaroguy1998 »

WoW!
That is a great looking setup! :drool: :mrgreen:
ASUS AM4 TUF Gaming X570-Plus (Wi-Fi)
AMD 3400G - 32G GSkill RipJaw V - {Win10} Pro 64bit, Win11 Update
Corsair H100i RGB PRO XT 240mm AIO Cooler
Corsair RM750X PSU - Corsair Force MP600 M.2 2280 1TB SSD
ASUS 27" LED LCD monitor - Lepai 2x20W Amp - Dayton B652 Spkrs

Corsair 4000D Airflow
User avatar
DJ Tucker
Legit Extremist
Legit Extremist
Posts: 1502
Joined: Tue Dec 30, 2008 11:52 am
Location: Hardbase Headquaters
Contact:

Re: New Custom Water Cooled Loop

Post by DJ Tucker »

KnightRid wrote: Sun Jan 13, 2019 4:44 am Looks really sweet man!

All that time to get everything though. I would have been going insane and calling every day to find out what the hell they were doing lol
After 3 weeks I did just that :lol:
camaroguy1998 wrote: Sun Jan 13, 2019 11:49 pm WoW!
That is a great looking setup! :drool: :mrgreen:

Thanks man :)
MSI Z590 Gaming Edge Wifi
Core i7 10700KF 5Ghz @ 1.25v With Alphacool Eisblock XPX Aurora Edge
Gigabyte RTX 2080 Super 1980Mhz @ 0.925v With TechN GPU Block
32Gb Corsair Vengeance RGB Pro 3600Mhz 16-18-18-38
Aqua Computer Ultitube 200 Pro D5 Next
Corsair XR5 240mm x2 & 360mm
Intel 670p 2Tb & WD Blue M.2 2Tb
Corsair HX1000i
Philips Momentum 3000 24" (Main) & MSI Optix G241V E2 (Second)
Lian Li O11D
Roccat Vulcan 120 Aimo, Roccat Kone Aimo Remastered and Roccat Sym Pro Air
User avatar
DJ Tucker
Legit Extremist
Legit Extremist
Posts: 1502
Joined: Tue Dec 30, 2008 11:52 am
Location: Hardbase Headquaters
Contact:

Re: New Custom Water Cooled Loop

Post by DJ Tucker »

So I even though I just built a custom water loop for my 2600k, I decided to upgrade my CPU to 9700k, ASRock Z390 Phantom Gaming 6 and Corsair Vengeance DDR4 2666mhz. The parts arrive tomorrow and will be installed as soon as I get it. Will post screenshots of my 2600k @ 4.8ghz OCCT non AVX temps and compare them to the 9700k at 4.8ghz with the same software.
MSI Z590 Gaming Edge Wifi
Core i7 10700KF 5Ghz @ 1.25v With Alphacool Eisblock XPX Aurora Edge
Gigabyte RTX 2080 Super 1980Mhz @ 0.925v With TechN GPU Block
32Gb Corsair Vengeance RGB Pro 3600Mhz 16-18-18-38
Aqua Computer Ultitube 200 Pro D5 Next
Corsair XR5 240mm x2 & 360mm
Intel 670p 2Tb & WD Blue M.2 2Tb
Corsair HX1000i
Philips Momentum 3000 24" (Main) & MSI Optix G241V E2 (Second)
Lian Li O11D
Roccat Vulcan 120 Aimo, Roccat Kone Aimo Remastered and Roccat Sym Pro Air
User avatar
KnightRid
Moderator
Moderator
Posts: 4295
Joined: Wed Dec 14, 2005 5:21 am
Location: Dallastown, PA

Re: New Custom Water Cooled Loop

Post by KnightRid »

DJ Tucker wrote: Fri Feb 08, 2019 4:27 pm So I even though I just built a custom water loop for my 2600k, I decided to upgrade my CPU to 9700k, ASRock Z390 Phantom Gaming 6 and Corsair Vengeance DDR4 2666mhz. The parts arrive tomorrow and will be installed as soon as I get it. Will post screenshots of my 2600k @ 4.8ghz OCCT non AVX temps and compare them to the 9700k at 4.8ghz with the same software.
LOL you sir are a true computer nerd! I am so proud :partyman:
Remember, I am opinionated and nothing I say or do reflects on anyone or anything else but me :finga:
User avatar
DJ Tucker
Legit Extremist
Legit Extremist
Posts: 1502
Joined: Tue Dec 30, 2008 11:52 am
Location: Hardbase Headquaters
Contact:

Re: New Custom Water Cooled Loop

Post by DJ Tucker »

so I had an unexpected fire about 4pm yesterday. for no reason my pcie port went up in flames instantaneously and fried the mobo and gpu. I looked to see if my gpu had leaked and nothing. tested the pump and seperatly to the system using mobo jumper so only the fans and pump powered and no leak. what on earth could have done this?
MSI Z590 Gaming Edge Wifi
Core i7 10700KF 5Ghz @ 1.25v With Alphacool Eisblock XPX Aurora Edge
Gigabyte RTX 2080 Super 1980Mhz @ 0.925v With TechN GPU Block
32Gb Corsair Vengeance RGB Pro 3600Mhz 16-18-18-38
Aqua Computer Ultitube 200 Pro D5 Next
Corsair XR5 240mm x2 & 360mm
Intel 670p 2Tb & WD Blue M.2 2Tb
Corsair HX1000i
Philips Momentum 3000 24" (Main) & MSI Optix G241V E2 (Second)
Lian Li O11D
Roccat Vulcan 120 Aimo, Roccat Kone Aimo Remastered and Roccat Sym Pro Air
User avatar
sbohdan
Legit Extremist
Legit Extremist
Posts: 1306
Joined: Sun Jul 17, 2005 9:33 am
Location: Canada
Contact:

Re: New Custom Water Cooled Loop

Post by sbohdan »

Bummer. Must be some kind of leak. A drop of water is enough. My system is running without maintenance and leaking for 7 years now but I did extensive trials for leakage before firing up the system. Sorry for your loss. Hopefully it's just the MOBO ](*,) Did you try putting water towels everywhere, while only the pump is working? If not, try that and you will see if the slightest drop of liquid would leak anywhere.
Main rig: NZXT Phantom modded case with Danger Den WC, Gigabyte B550 Aorus Elite, Ryzen 5800X @ stock, 32GB Patriot Viper DDR4 3200Mhz 16-18-18-36-1T, AMD RX 5700XT + AlphaCool WC, ACER Nitro XV2 27", SP 1TB nvme PCiE GEN3, Samsung 2TB; Cooler Master MW Gold 650W, Win10 Pro 64
my complete GFX tuneup & cooling mod: http://forums.legitreviews.com/viewtopi ... highlight=
User avatar
DJ Tucker
Legit Extremist
Legit Extremist
Posts: 1502
Joined: Tue Dec 30, 2008 11:52 am
Location: Hardbase Headquaters
Contact:

Re: New Custom Water Cooled Loop

Post by DJ Tucker »

sbohdan wrote: Sun Feb 10, 2019 3:24 pm Bummer. Must be some kind of leak. A drop of water is enough. My system is running without maintenance and leaking for 7 years now but I did extensive trials for leakage before firing up the system. Sorry for your loss. Hopefully it's just the MOBO ](*,) Did you try putting water towels everywhere, while only the pump is working? If not, try that and you will see if the slightest drop of liquid would leak anywhere.
Already done 1 hour leak testing before I ran the system and not a single drop. Then after 30 mins of the system running sweet as a nut during timespy benchmarking the pcie port went up in smoke. I jumped up to turn the system off at the mains and as I did the fire burst out and fried my gpu and mobo. I leak tested again just the pump and nothing. I now worry that I did something else to have made this happen and I wont be able to rma the board and the gpu and have lost £1200.
MSI Z590 Gaming Edge Wifi
Core i7 10700KF 5Ghz @ 1.25v With Alphacool Eisblock XPX Aurora Edge
Gigabyte RTX 2080 Super 1980Mhz @ 0.925v With TechN GPU Block
32Gb Corsair Vengeance RGB Pro 3600Mhz 16-18-18-38
Aqua Computer Ultitube 200 Pro D5 Next
Corsair XR5 240mm x2 & 360mm
Intel 670p 2Tb & WD Blue M.2 2Tb
Corsair HX1000i
Philips Momentum 3000 24" (Main) & MSI Optix G241V E2 (Second)
Lian Li O11D
Roccat Vulcan 120 Aimo, Roccat Kone Aimo Remastered and Roccat Sym Pro Air
User avatar
sbohdan
Legit Extremist
Legit Extremist
Posts: 1306
Joined: Sun Jul 17, 2005 9:33 am
Location: Canada
Contact:

Re: New Custom Water Cooled Loop

Post by sbohdan »

Holly sh*t! Realy sorry to hear that! That's a lot of cash to loose. Let's hope you can still RMA and all ends well... :prayer:
Main rig: NZXT Phantom modded case with Danger Den WC, Gigabyte B550 Aorus Elite, Ryzen 5800X @ stock, 32GB Patriot Viper DDR4 3200Mhz 16-18-18-36-1T, AMD RX 5700XT + AlphaCool WC, ACER Nitro XV2 27", SP 1TB nvme PCiE GEN3, Samsung 2TB; Cooler Master MW Gold 650W, Win10 Pro 64
my complete GFX tuneup & cooling mod: http://forums.legitreviews.com/viewtopi ... highlight=
Post Reply