Inno3D GTX 1070 Accelero Hybrid

This is the place to discuss the latest computer hardware issues and technology. Please keep the discussion ON TOPIC!
Post Reply
Matthew5
Legit Little One
Legit Little One
Posts: 1
Joined: Sat Jul 27, 2019 1:26 am

Inno3D GTX 1070 Accelero Hybrid

Post by Matthew5 »

So I had a gtx 1070 ASUS dual before but wasn't happy with it and wanted something better to match my system black/red theme. I wanted to watercool the ASUS but left sided vrm's stopped that without custom modding which I can't do with 2 kids. So I opted for the title named card.

I have to say I was impressed with the fact this card can pull 190 watts on the power limit over the 168 watts on the ASUS. I can now remain at 2100mhz through out any benchmark I throw at it, compared to the ASUS with would thermal throttle and power limit to an average of 2015mhz and frequent drops to under 2000mhz.

During a full catzilla bench (raymarch test heats any gpu crazy hot), the stock thermal paste got the ASUS 1070 to 68c 100% fan and GC3 Extreme got it to 62c. Stock thermal paste got The Inno3D 1070 to 58c 100% fan and GC3 Extreme got it to 50c =D>

The stock paste on the Inno3D 1070 was badly applied. In fact it was thick, all over the gpu and dried already. Cheap nasty stuff was clearly used in an attempt to save a few £££ hoping the water cooler would do it justice. A simple re-apply of thermal paste did amazing wonders. I did the test again with a little less paste (just in case I got a bad thermal reading) and got the following results: Inno3D 1070 GC3 Extreme got it to 48c.

As you can see that was the best I believe I could get. To make things better, I got it to pass it 2125/9200 @ 1.094v for 49c =D>

I game at 1080p so the GTX 1070 is plenty for me :)
Last edited by Matthew5 on Tue Jul 30, 2019 10:21 pm, edited 1 time in total.
User avatar
KnightRid
Moderator
Moderator
Posts: 4295
Joined: Wed Dec 14, 2005 5:21 am
Location: Dallastown, PA

Re: Inno3D GTX 1070 Accelero Hybrid

Post by KnightRid »

Awesome! Sounds like you found a winner. It always amazes me that companies won't use better thermal paste (or apply it correctly) on video cards that are hundreds (or thousands) of dollars.

Did you watercool the Inno3D or are you happy with the temps on air? Duh, HYBRID - already water cooled #-o
Remember, I am opinionated and nothing I say or do reflects on anyone or anything else but me :finga:
User avatar
DJ Tucker
Legit Extremist
Legit Extremist
Posts: 1502
Joined: Tue Dec 30, 2008 11:52 am
Location: Hardbase Headquaters
Contact:

Re: Inno3D GTX 1070 Accelero Hybrid

Post by DJ Tucker »

I had the inno3d gtx 1070 ichill Accelero Hybrid and the paste was just as bad. so thick there was more over the edge than on the die. either way I got it down to 48c at 1575mhz for 1.094v so I was happy with that :)
MSI Z590 Gaming Edge Wifi
Core i7 10700KF 5Ghz @ 1.25v With Alphacool Eisblock XPX Aurora Edge
Gigabyte RTX 2080 Super 1980Mhz @ 0.925v With TechN GPU Block
32Gb Corsair Vengeance RGB Pro 3600Mhz 16-18-18-38
Aqua Computer Ultitube 200 Pro D5 Next
Corsair XR5 240mm x2 & 360mm
Intel 670p 2Tb & WD Blue M.2 2Tb
Corsair HX1000i
Philips Momentum 3000 24" (Main) & MSI Optix G241V E2 (Second)
Lian Li O11D
Roccat Vulcan 120 Aimo, Roccat Kone Aimo Remastered and Roccat Sym Pro Air
Post Reply