Page 1 of 1

Super Pi

Posted: Fri Jan 05, 2007 1:15 am
by zparker
I have run super pi with the system at 3ghz per core 1.31v and 4-4-4-12 2t at 2.1v

It took me 19m 39s to find pi to 32m places.

Is that good? What are some of yalls times.

Posted: Fri Jan 05, 2007 2:38 am
by kenc51
I get SuperPi 32m - 29min 47sec 50ms with the rig in my sig!

http://www.hwbot.org/result.do?resultId=565852

Also check out this thread, http://forums.legitreviews.com/viewtopic.php?t=7486

Posted: Fri Jan 05, 2007 7:31 am
by FZ1
That's a good score zparker. I got 26M Ken :P :P :P

Tighter memory timings and faster RAM really help this benchmark.

Posted: Fri Jan 05, 2007 8:42 am
by zparker
i also had prime 95 running on the second core using 1024mb of ram.

I will run it by its self tonight and update.

Posted: Fri Jan 05, 2007 1:27 pm
by kenc51
FZ1 wrote:That's a good score zparker. I got 26M Ken :P :P :P

Tighter memory timings and faster RAM really help this benchmark.
I didn't try tweak anything really.......Your ~250MHz faster but ~4mins difference doesn't sound right to me :? I'll try lower the misc. timings, but I'm using an Asus board........I almost miss the expert board. For some reason my PC won't give good PCMark results......even comparible to other systems with my spec. The HDD gives very low scores.
Doesn't bother me too much......Conroe is on the horizon anyway :finga:

Posted: Fri Jan 05, 2007 4:38 pm
by dicecca112
well I have tighter timings and a faster clock on my E6400 and I was about a little under 17mins so that seems about right.

http://www.hwbot.org/result.do?resultId=566226

Posted: Fri Jan 05, 2007 4:39 pm
by zparker
yeah i understand, I had a amd athlon xp barton core 2800+ with a gig of dual channel 9800 pro 128 flashed to xt 128 and could only get 15k on 3dmark 01se. It didnt make sense to me. But now i saved a little money and went current middle of the market and am happy beone belief. Espically since they overclock so well. If you look at it like I do, I went from a 2.1 gig system to a 6 gig monster :mrgreen: It makes me feel all warm inside :drinkers:

Posted: Fri Jan 05, 2007 5:02 pm
by zparker
ok Ran it with nothing else running. set afftinity to core 2 and got pi in 18m 04s to 32m with everything still at the same settings as before just it being the only thing running. Next i will set at 3.2 and run it again and post those results.

edit got the results... processors at 3.2 voltage a 1.325v memory at 4-4-4-12 2t 2.1v

super pi in 16m 42s to 32m

core temps didnt break 54c stock cooling!

Hows that???

Posted: Wed Jan 10, 2007 11:18 pm
by zparker
well im happy as pie since i am a 1st time overclocker.

Posted: Thu Jan 11, 2007 7:43 am
by DMB2000uk
lol, good for you. You know superpi was one of the benchmarks I never really got stuck into when I was overclocking my E6600, maybe I'll get into it when I'm going for a second bout of OC'in sometime soonish.

Beware, the tweaking and retesting to achive the best you can is very addictive!

Dan

Posted: Thu Jan 11, 2007 3:59 pm
by zparker
yeah that is why i stopped with 3.0ghz. It runs smooth and is stable without a shitload of tweaking. I still have no complaints.