Pentium M on your Socket 478 platform

Evilsizer · Post by **Evilsizer** » Tue Jun 07, 2005 9:23 pm

not sure what to tell you since im using the p4pse and 730 without any problems. i would recommend heading over to xtreme. there are many more people with diferent setups the could help you out better then me. there are also so many dothan(PM)thread if you have the time read them all you might be able to fix it. if not post the problems you have having. there are 2 dothan stickies @top of the page in my linky below so start with those first and GL. getting it running correctly.

http://www.xtremesystems.org/forums/for ... y.php?f=59

tomliu75 · Post by **tomliu75** » Thu Jun 09, 2005 1:34 pm

Does anyone know where I can get the P4P800SE 1009 Beta Bios?
I can't seem to find it on the ASUS site.

If someone can provide me the link to the bios that would be great.

Post by **Apoptosis** » Thu Jun 09, 2005 1:55 pm

ASUS Has BIOS 1008 on their site located here for the ASUS P4P800SE motherboard and that bios DOES support the CT-479 adapter.

The ASUS 1009 BIOS has not been approved and my card failed when running this BIOS. If you do find it pay attention to what you are doing or you will end up with dead cards and boards.

Evilsizer · Post by **Evilsizer** » Thu Jun 09, 2005 3:58 pm

Apoptosis wrote:ASUS Has BIOS 1008 on their site located here for the ASUS P4P800SE motherboard and that bios DOES support the CT-479 adapter.

The ASUS 1009 BIOS has not been approved and my card failed when running this BIOS. If you do find it pay attention to what you are doing or you will end up with dead cards and boards.

how did that happen? im running the beta now on my board. with the 730 @default volts @2.4ghz. It seem wierd how the release the beta and remove. then asus doesnt release a new bios for p4pse and they release a new one for the p4c and the p4p-vm.. why those two and how come pass up the p4pse. I know we wont get answers but it makes no sense to me.

adamhearn · Post by **adamhearn** » Fri Jun 10, 2005 10:37 am

Evilsizer wrote:not sure what to tell you since im using the p4pse and 730 without any problems. i would recommend heading over to xtreme. there are many more people with diferent setups the could help you out better then me. there are also so many dothan(PM)thread if you have the time read them all you might be able to fix it. if not post the problems you have having. there are 2 dothan stickies @top of the page in my linky below so start with those first and GL. getting it running correctly.
http://www.xtremesystems.org/forums/for ... y.php?f=59

Thx for the tip. It would seem that a 6x multiplier is 'normal' for this version of the P4C800-E BIOS - I hope ASUS will either fit it or add the option to select a specific multiplier. I have downloaded the ESIT tool and the CPU is really quick at 2Ghz!

davluks · Post by **davluks** » Wed Jun 15, 2005 3:33 am

still waiting for the review part 3.

Asus RMA REALLY TAKES A LONG TIME

-mogwai · Post by **-mogwai** » Wed Jun 15, 2005 11:25 am

i really want an asus p4gd1, but i cant find anywhere to buy one

i wish i spoke german or french so i can freaking find out if there are any online vendors that will ship to the united states

davluks · Post by **davluks** » Wed Jun 15, 2005 3:54 pm

we have a lot of p4gd1 in Singapore here.

-mogwai · Post by **-mogwai** » Wed Jun 15, 2005 5:59 pm

how much would you want for you to mail one to me?

-mogwai · Post by **-mogwai** » Thu Jun 16, 2005 12:00 am

i read someplace that clockgen won't work on the p4gd1.... is this true?

adamhearn · Post by **adamhearn** » Thu Jun 16, 2005 5:19 pm

New BIOS (1022) for P4C800-E was released tonight. STLL cannot set the correct multiplier in the BIOS...

-mogwai · Post by **-mogwai** » Thu Jun 16, 2005 9:18 pm

audiophile wrote:i read someplace that clockgen won't work on the p4gd1.... is this true?

tomliu75 · Post by **tomliu75** » Thu Jun 23, 2005 1:57 am

There is a new bios out for the ASUS P4P800SE.
Its 1009 beta 003. It allows you to adjust the multiplier.

I have a M 750 and now I'm able to boot at 220FSB at 11 multiplier.
I'm able to up the FSB to 227 to get 2.5Ghz

I can't seem to get pass 2.5Ghz. Anyone else having problems getting pass 2.5 on a M750?

tomliu75 · Post by **tomliu75** » Thu Jun 23, 2005 2:05 am

I can't seem to get clockgen to work in ghost mode.
I'm using the P4P800SE motherboard.

I created a save.txt file with the following content:
[CG-ICS952607]
FSB=225
AGP=66

The system would lock up on me when I would run the shortcut using this text file.

Could some point out my mistake?

tomliu75 · Post by **tomliu75** » Wed Jun 29, 2005 7:01 pm

I guest no one is reading this thread anymore.

Post by **Apoptosis** » Wed Jun 29, 2005 7:11 pm

doesn't look too active anymore... I got my adapter back from ASUS, but my boards are still fried... can't be much help

This thread had has 20,000 views on it and it's going up, so people are still reading it.

tomliu75 · Post by **tomliu75** » Thu Jun 30, 2005 11:09 am

Yeah I was hoping that someone would help me out with the ghost mode in clockgen. Kind of a pain to have to reset the FSB bus after ever reboot.

For some reason it hangs on me if I use clockgen in ghost mode.

Pongi · Post by **Pongi** » Thu Jul 07, 2005 5:17 pm

Apoptosis wrote:doesn't look too active anymore... I got my adapter back from ASUS, but my boards are still fried... can't be much help This thread had has 20,000 views on it and it's going up, so people are still reading it.

My CT-479 died a couple of days ago, my P4P800-SE seems to be working completely fine though. Don't know why but just stopped POSTing, Though sometimes it wouldn't POST intermiddently but the frequency increased until it just doesn't work anymore.

I was having VCORE issues with it the first day I got it, worked fine for a few hours then bam, started pumping 1.56V to my CPU all the time and I couldn't go below 1.5V in the BIOS. Mine was a rev. 1.01 and I wonder if they have a newer more reliable rev. out. I think some of the early ones have some engineering flaws, possibly all of them if they haven't revised them yet.

BTW whave revision CT-479 did you recieve from Asus?

-mogwai · Post by **-mogwai** » Thu Jul 07, 2005 8:05 pm

can someone out of state order me a p4gd1? please? i'll paypal the money for the board and shipping...

davluks · Post by **davluks** » Sat Jul 09, 2005 5:04 pm

Please check PM

audiophile wrote:can someone out of state order me a p4gd1? please? i'll paypal the money for the board and shipping...