EVGA SR-2 Motherboard Gets A Custom PC Case
- Apoptosis
- Site Admin
- Posts: 33941
- Joined: Sun Oct 05, 2003 8:45 pm
- Location: St. Louis, Missouri
- Contact:
EVGA SR-2 Motherboard Gets A Custom PC Case
EVGA SR-2 Motherboard Gets A Custom PC Case
We had a chance to stop by and meet with EVGA at Computex 2010 and found that they are showing off their first ever PC case! The case doesn't have a name yet, but it has been developed to properly enclose their massive $599.99 EVGA Classified Super Record 2 (SR-2) motherboard. we have pictures from both of the original case prototypes that are a must see.
Article Title: EVGA SR-2 Motherboard Gets A Custom PC Case
Article URL: http://www.legitreviews.com/article/1324/1/
We had a chance to stop by and meet with EVGA at Computex 2010 and found that they are showing off their first ever PC case! The case doesn't have a name yet, but it has been developed to properly enclose their massive $599.99 EVGA Classified Super Record 2 (SR-2) motherboard. we have pictures from both of the original case prototypes that are a must see.
Article Title: EVGA SR-2 Motherboard Gets A Custom PC Case
Article URL: http://www.legitreviews.com/article/1324/1/
Re: EVGA SR-2 Motherboard Gets A Custom PC Case
You know the case is big when it makes a 24" monitor look small.
"The democracy will cease to exist when you take away from those who are willing to work and give to those who would not."
-Thomas Jefferson
-Thomas Jefferson
Re: EVGA SR-2 Motherboard Gets A Custom PC Case
Beats me why they just didn't ask cooler master for a custom HAF932 case or one of those really expensive HP blackbird cases now that would have been smexy or an silverstone RV02
Asus Crosshair V Formula
AMD FX 8320 @ 3700MHz NB/HT @ 2600MHZ
2x 4GB Corsair Vengeance LP 1600 C9
1x Sapphire Radeon HD 7850 9550MHz core 1250MHz mem
1x Pioneer DVD-RW DVR212S SATA
2x Samsung HD502IJ 16MB cache 7200rpm raid0
1x Samsung HD502IJ 16MB cache 7200rpm storage
1x WD2500AAJS 8MB cache 7200rpm storage
Thermolab Baram 1 x 120mm CM R4 90cfm 2000rpm 1x SilverStone 120mm AP 1500rpm 37.5cfm
SilverStone ST75F-P 750W PSU Full Modular
SilverStone RaVeN RV02B-W
AMD FX 8320 @ 3700MHz NB/HT @ 2600MHZ
2x 4GB Corsair Vengeance LP 1600 C9
1x Sapphire Radeon HD 7850 9550MHz core 1250MHz mem
1x Pioneer DVD-RW DVR212S SATA
2x Samsung HD502IJ 16MB cache 7200rpm raid0
1x Samsung HD502IJ 16MB cache 7200rpm storage
1x WD2500AAJS 8MB cache 7200rpm storage
Thermolab Baram 1 x 120mm CM R4 90cfm 2000rpm 1x SilverStone 120mm AP 1500rpm 37.5cfm
SilverStone ST75F-P 750W PSU Full Modular
SilverStone RaVeN RV02B-W
Re: EVGA SR-2 Motherboard Gets A Custom PC Case
oh oh I have a name for the case the EVGA BFUC ( Big Fat Ugly Cheap) case
Asus Crosshair V Formula
AMD FX 8320 @ 3700MHz NB/HT @ 2600MHZ
2x 4GB Corsair Vengeance LP 1600 C9
1x Sapphire Radeon HD 7850 9550MHz core 1250MHz mem
1x Pioneer DVD-RW DVR212S SATA
2x Samsung HD502IJ 16MB cache 7200rpm raid0
1x Samsung HD502IJ 16MB cache 7200rpm storage
1x WD2500AAJS 8MB cache 7200rpm storage
Thermolab Baram 1 x 120mm CM R4 90cfm 2000rpm 1x SilverStone 120mm AP 1500rpm 37.5cfm
SilverStone ST75F-P 750W PSU Full Modular
SilverStone RaVeN RV02B-W
AMD FX 8320 @ 3700MHz NB/HT @ 2600MHZ
2x 4GB Corsair Vengeance LP 1600 C9
1x Sapphire Radeon HD 7850 9550MHz core 1250MHz mem
1x Pioneer DVD-RW DVR212S SATA
2x Samsung HD502IJ 16MB cache 7200rpm raid0
1x Samsung HD502IJ 16MB cache 7200rpm storage
1x WD2500AAJS 8MB cache 7200rpm storage
Thermolab Baram 1 x 120mm CM R4 90cfm 2000rpm 1x SilverStone 120mm AP 1500rpm 37.5cfm
SilverStone ST75F-P 750W PSU Full Modular
SilverStone RaVeN RV02B-W
Re: EVGA SR-2 Motherboard Gets A Custom PC Case
Could always get a Mountain Mods Crystal Ship Ascension CYO, nice looking and the SR2 will fit. Its $450, but if you can drop the coin on the SR2 then you can swing the MM case
"The democracy will cease to exist when you take away from those who are willing to work and give to those who would not."
-Thomas Jefferson
-Thomas Jefferson
- InspectahACE
- Legit Extremist
- Posts: 1776
- Joined: Tue Sep 06, 2005 8:25 pm
- Location: Las Vegas
Re: EVGA SR-2 Motherboard Gets A Custom PC Case
Even if I had the money for that or the board...they'd have to paint the interior black for me to buy it. Until then, I keep my kidney..and most of my blood.
i9-9900k | ASUS Maximus XI Hero | ASUS Strix RTX 2070 Super | 32GB G.Skill Trident RGB DDR4-3600 | Cooler Master ML360L AIO | Seagate Firecuda 510 1TB NVME SSD | Tt ToughPower RGB 850W PSU | Sound Blaster Z | LL PC-O11 Dynamic | ASUS Gladius II Mouse | ASUS Strix Scope RX| ASUS VG259QMM 24" 240hz monitor | Windows 11 Pro
Re: EVGA SR-2 Motherboard Gets A Custom PC Case
If you have the money for the board then you must have the $$$ to get the remaining part of the case powder coated black. Or the $ for a can of black paint.
It's just a Cooler Master ATCS 840 in another form. I currently have an ATCS 840 on the bench with the control and I/O panels removed for some case mods. It was easy to take them off.
The only thing I really don't like about the EVGA modded SR-2 case is the fact the area up top is taken up by the power supply. That change ends up blocking one of the top fans.
Oh, and there is another complaint for the drive bays. I like the way they work well enough. The back is setup with bossed nuts as if there was going to be a backplane for the hard drives. However, no hard drive backplane has yet appeared. Having a SATA or SAS backplane would be a welcome addition I would gladly pay for. Talk about neatening up the build!
It's just a Cooler Master ATCS 840 in another form. I currently have an ATCS 840 on the bench with the control and I/O panels removed for some case mods. It was easy to take them off.
The only thing I really don't like about the EVGA modded SR-2 case is the fact the area up top is taken up by the power supply. That change ends up blocking one of the top fans.
Oh, and there is another complaint for the drive bays. I like the way they work well enough. The back is setup with bossed nuts as if there was going to be a backplane for the hard drives. However, no hard drive backplane has yet appeared. Having a SATA or SAS backplane would be a welcome addition I would gladly pay for. Talk about neatening up the build!
- InspectahACE
- Legit Extremist
- Posts: 1776
- Joined: Tue Sep 06, 2005 8:25 pm
- Location: Las Vegas
Re: EVGA SR-2 Motherboard Gets A Custom PC Case
Quite true...Although having the money doesn't quite mean that person has the experience in doing a proper paint job, or the patience.Vectrexer wrote:If you have the money for the board then you must have the $$$ to get the remaining part of the case powder coated black. Or the $ for a can of black paint.
i9-9900k | ASUS Maximus XI Hero | ASUS Strix RTX 2070 Super | 32GB G.Skill Trident RGB DDR4-3600 | Cooler Master ML360L AIO | Seagate Firecuda 510 1TB NVME SSD | Tt ToughPower RGB 850W PSU | Sound Blaster Z | LL PC-O11 Dynamic | ASUS Gladius II Mouse | ASUS Strix Scope RX| ASUS VG259QMM 24" 240hz monitor | Windows 11 Pro
-
- Legit Little One
- Posts: 1
- Joined: Thu Jun 24, 2010 8:30 pm
Re: EVGA SR-2 Motherboard Gets A Custom PC Case
Anyone know what the CPU coolers in the pictures are? It looks like the coolermaster logo, and they sort of look like the cooler master v-series, but not quite. Any higher-res pictures available...? Would really appreciate it.
Re: EVGA SR-2 Motherboard Gets A Custom PC Case
That would be the V6GT
"The democracy will cease to exist when you take away from those who are willing to work and give to those who would not."
-Thomas Jefferson
-Thomas Jefferson
- Apoptosis
- Site Admin
- Posts: 33941
- Joined: Sun Oct 05, 2003 8:45 pm
- Location: St. Louis, Missouri
- Contact:
Re: EVGA SR-2 Motherboard Gets A Custom PC Case
V6GT right?
Isn't there a V6 and now the V6GT??
Isn't there a V6 and now the V6GT??
Re: EVGA SR-2 Motherboard Gets A Custom PC Case
Your right, its the V6GT, the V6 doesn't have the led in the center.
"The democracy will cease to exist when you take away from those who are willing to work and give to those who would not."
-Thomas Jefferson
-Thomas Jefferson