RunCore Pro V Max 120GB SATA III SSD Review
Posted: Mon Feb 20, 2012 8:23 am
RunCore Pro V Max 120GB SATA III SSD Review
RunCore has beefed up their Pro V line with the SF-2281 SandForce controller and a SATA III interface to attempt to join the ranks of the elite drives. Employing the prized "Golden" firmware from SandForce, it promises to offer better IOPS performance and better sustained reads and writes. Will it be enough to standout from the SandForce crowd? Have a look at the article to see!
Article Title: RunCore Pro V Max 120GB SATA III SSD Review
Article URL: http://legitreviews.com/article/1855/1/
RunCore has beefed up their Pro V line with the SF-2281 SandForce controller and a SATA III interface to attempt to join the ranks of the elite drives. Employing the prized "Golden" firmware from SandForce, it promises to offer better IOPS performance and better sustained reads and writes. Will it be enough to standout from the SandForce crowd? Have a look at the article to see!
RunCore is not one of the companies that immediately comes to mind when thinking of SSD manufacturers but they have been churning out drives since 2007. We've even featured the SATA II version of the Pro V awhile back. The SF-1200 controlled, SATA II drive proved to be a good performer although at the time the pricing was a little above the competition. Back to present day, the Pro V line has been upgraded to the newest SandForce SF-2281 controller and along with that, the interface has been upped to 6Gbps SATA III. They sent us over the Pro V Max 120GB version for evaluation so we'll get started by telling a little bit about it...
Article Title: RunCore Pro V Max 120GB SATA III SSD Review
Article URL: http://legitreviews.com/article/1855/1/