Fathers Day...
- Apoptosis
- Site Admin
- Posts: 33941
- Joined: Sun Oct 05, 2003 8:45 pm
- Location: St. Louis, Missouri
- Contact:
Fathers Day...
Anyone got any good father day gift ideas?
- camaroguy1998
- Legit Extremist
- Posts: 1899
- Joined: Sun Jan 07, 2007 5:24 pm
- Location: St. Charles, Mo.
Re: Fathers Day...
Thats a hard question...I usually hint to what I'd like to have!Apoptosis wrote:Anyone got any good father day gift ideas?
This year its the Worx GT Trimmer/Edger
Now to wait and see if the wife and kids are listening!

http://www.worxyardtools.com/garden-too ... =worxgtcom
ASUS AM4 TUF Gaming X570-Plus (Wi-Fi)
AMD 3400G - 32G GSkill RipJaw V - {Win10} Pro 64bit, Win11 Update
Corsair H100i RGB PRO XT 240mm AIO Cooler
Corsair RM750X PSU - Corsair Force MP600 M.2 2280 1TB SSD
ASUS 27" LED LCD monitor - Lepai 2x20W Amp - Dayton B652 Spkrs
Corsair 4000D Airflow
AMD 3400G - 32G GSkill RipJaw V - {Win10} Pro 64bit, Win11 Update
Corsair H100i RGB PRO XT 240mm AIO Cooler
Corsair RM750X PSU - Corsair Force MP600 M.2 2280 1TB SSD
ASUS 27" LED LCD monitor - Lepai 2x20W Amp - Dayton B652 Spkrs
Corsair 4000D Airflow
-
- Legit Extremist
- Posts: 2301
- Joined: Tue Mar 27, 2007 3:35 pm
Re: Fathers Day...
My Dad aways said to save my money. Why not put some money in your savings account and see if he thinks that was a good idea. If not, go with him to do his favorite hobby, ex.. Fishing, hunting, hiking. Just spending time with him would be a wonderful memory for the two of you. 

- Skippman
- Legit Extremist
- Posts: 2082
- Joined: Wed May 17, 2006 10:16 am
- Location: St. Louis, MO USA
- Contact:
Re: Fathers Day...
My dads forever working on plumbing and such for people around the neighborhood. I figured this year I'd get him one of those LED work lights that's rechargeable as he could actually use that.
Re: Fathers Day...
I'm planning on a day at the range with my dad and the kids. We are going to load up the 22s and shoot some steel plate.
"The democracy will cease to exist when you take away from those who are willing to work and give to those who would not."
-Thomas Jefferson
-Thomas Jefferson
Re: Fathers Day...
I asked my wife for the new DeWALT nail gun
Thank you DeWalt!!
New Nail Gun, made by DeWALT.
It can drive a 16-D nail through a 2 X 4 at 200 yards.
This makes construction a breeze,
you can sit in your lawn chair and build a fence.
Just get your wife to hold the fence boards in place while you sit back,
relax with a cold drink and when she has the board in the right place,
just fire away.
With the hundred round magazine,
you can build the fence with a minimum of reloading.
Thank you DeWalt!!
New Nail Gun, made by DeWALT.
It can drive a 16-D nail through a 2 X 4 at 200 yards.
This makes construction a breeze,
you can sit in your lawn chair and build a fence.
Just get your wife to hold the fence boards in place while you sit back,
relax with a cold drink and when she has the board in the right place,
just fire away.
With the hundred round magazine,
you can build the fence with a minimum of reloading.
- Apoptosis
- Site Admin
- Posts: 33941
- Joined: Sun Oct 05, 2003 8:45 pm
- Location: St. Louis, Missouri
- Contact:
Re: Fathers Day...
oh man... could you imagine the look on the neighbors if you pulled that out to work on the fence or roof?
Re: Fathers Day...
Priceless 

-----------------------------------------------------
- CoolerMaster Elite 330
- Intel Pentium Dual Core E5200 @ 3.16ghz (9.5 x 333 @ 1.12 volts)
- Gigabyte GA-P35-DS3L
- 4 GB G-Skill DDR2 800
- Asus 8800GT 512mb w/Glaciator Fansink
- Antec Trio TruePower 650w
- CoolerMaster Elite 330
- Intel Pentium Dual Core E5200 @ 3.16ghz (9.5 x 333 @ 1.12 volts)
- Gigabyte GA-P35-DS3L
- 4 GB G-Skill DDR2 800
- Asus 8800GT 512mb w/Glaciator Fansink
- Antec Trio TruePower 650w
Re: Fathers Day...
That would make for a quick job.
I will probably help my dad out on the cabin that we have been working on (and haven't gotten the chance to work on since winter)
I will probably help my dad out on the cabin that we have been working on (and haven't gotten the chance to work on since winter)
----
Andy
New Rig: Intel Q6600 (2.7ghz), ASUS P5KC, 4GB DDR2-800, Palit 9600GT (1GB), Ultra X3 1KW (thanks LR!), Vista 64bit
Dell Rig: AMD Athlon X2 4000+ (2.1ghz), 2 GB DDR2 Ram, MSI 8800GT (512MB), Vista 32bit
PSN: VICaphit
Andy
New Rig: Intel Q6600 (2.7ghz), ASUS P5KC, 4GB DDR2-800, Palit 9600GT (1GB), Ultra X3 1KW (thanks LR!), Vista 64bit
Dell Rig: AMD Athlon X2 4000+ (2.1ghz), 2 GB DDR2 Ram, MSI 8800GT (512MB), Vista 32bit
PSN: VICaphit
- Illuminati
- Site Admin
- Posts: 2378
- Joined: Mon Oct 06, 2003 8:48 am
- Location: Wright City, Missouri, USA
- Contact:
- Dragon_Cooler
- Legit Extremist
- Posts: 2405
- Joined: Wed Oct 12, 2005 10:17 am
- Location: DFW Texas
- Contact: