Legit Reviews

Havent had time to do anything with it yet, but its here!
Yeah, its Yellow!

I like it! Put some black in there and a big ole Steelers logo on the side and you will have the perfect computer

I am not keen on the white chassis though....

KnightRid wrote: ↑Tue Nov 10, 2020 4:05 am I like it! Put some black in there and a big ole Steelers logo on the side and you will have the perfect computer

I am not keen on the white chassis though....

The front is a Black Mesh, along with the top fan cover!
Also the cubby hole on top has a black rubber mat!
The white was a last minute choice!
He had to paint white under the yellow, so I said paint it all white!
After its all assembled you wont be able to see much of the white!

As far as ANY football goes, it wont be on my case!
I live in the StL area, so Football is a sore subject here!
After the Cardinals moved to AZ and then the Rams went to LA.... So, for the Cardinals & Rams
We were lucky enough to get an XFL Team,
The BattleHawks, they were kickin A$$ and takin' names when Covid hit and BAM!!!
Football was gone AGAIN!
XFL is supposed to be coming back but probably not until 2022

Anyway, I'm going to hold off any changes until I get it assembled and in place.
See what it looks like then! Hopefully that will be by the weekend!
But, its definitely on my mind!

damn that's yellow alright. the white is ok due to the yellow but black would be better imo. let's see what the weekend brings once all assembled

Can't wait for assembled pics!

Oh and just FYI - Here in PA we have 2 NFL teams.....

misspelled glow in the dark

she's a bit bright

bubba wrote: ↑Wed Nov 11, 2020 9:43 am misspelled glow in the dark

she's a bit bright

LMAO...The name kinda gives it away ... Chartreuse NEON = Glow in the Dark!
Yeah its sitting in my (Dark)dinning room and I can see it clearly 20ft away!

KnightRid wrote: ↑Wed Nov 11, 2020 4:23 am Can't wait for assembled pics!

Oh and just FYI - Here in PA we have 2 NFL teams.....

Couldn't let this pass....Here in Mo. we may be down to one NFL team but,
They are the Best!

As usual things havent exactly gone my way this week! Life keeps getting in the way of my plans!
I put the case together today but didnt get the puter parts in it yet!
With that said, I couldnt just leave it sit in the kitchen...
So shes sitting in her place, just no guts yet!




You dont even have to look that close to see the Glow/Reflection on the right side wall!

Very nice! Although reverse nakedness is not a thing you should practice

Wait till you get the guts in and start her up for the first time!

KnightRid wrote: ↑Sat Nov 14, 2020 4:48 am Very nice! Although reverse nakedness is not a thing you should practice

Wait till you get the guts in and start her up for the first time!

lol
Still trying to decide on sticking with stock fans(3spd, Blue LEDs)Leaning towards this!
Or a couple corsair SP120s(ARGB) Problem is the ARGBs requier a controller and not much room for it!(If Any)
Guts are going to be whats in my Sig! 9590H2O, Crosshair....etc

based on your setup argb headers aren't on that board so the copro (Commander Pro) is really your only bet for that. however the blue led could work or maybe uv led fans to match the glow of the paint job

DJ Tucker wrote: ↑Sat Nov 14, 2020 1:23 pm based on your setup argb headers aren't on that board so the copro (Commander Pro) is really your only bet for that. however the blue led could work or maybe uv led fans to match the glow of the paint job

I have 2 sets of Corsair iCUE SP120 RGB Pro's!
Each includes a Lighting Node Core for a controller!
Still debating what goes where but, pretty sure those are going in my new build!

https://www.newegg.com/corsair-co-90500 ... 6835181182

then the copro is the way to go

DJ Tucker wrote: ↑Tue Nov 17, 2020 5:51 am then the copro is the way to go

If I go the route I plan on, the ARGB fans and Node Core should be all I need!
This will be in my new build and the Mobo is the ASUS AM4 TUF Gaming X570-Plus (Wi-Fi)
The Node Core works with iCUE software and the fans can connect to the mobo for fan functions!

With that said...
I'm pretty sure I'll use the Antec factory fans in the freshly painted 900!
They are 3spd fans and I think that may come in handy for the 120mm AIO cooler!

Now, with all that said...
You seem to know exactly what a CoPro is and can do!
Are you using one? I would like to know more about it!
You have me rethinking my Fan Plan!

The copro allows you to connect 6 fans to the device that can be individually controlled using icue. You also have 2 usb ports for the likes of and corsair psu or corsair aio or corsair lighting node and rgb hubs. You also have 2 corsair proprietary led connections that allow up to 4 led strips on each connection and then allow individual control of each led.

You can connect your Corsair iCUE SP120 RGB Pro rgb header to the lighting node core and the fans to the copro and control the fans and rgb of the fans using icue. Make sure you connect the usb of the lighting node core to the copro for seemless control. Yes all corsair hardware can be interlinked

DJ Tucker wrote: ↑Wed Nov 18, 2020 4:36 am The copro allows you to connect 6 fans to the device that can be individually controlled using icue. You also have 2 usb ports for the likes of and corsair psu or corsair aio or corsair lighting node and rgb hubs. You also have 2 corsair proprietary led connections that allow up to 4 led strips on each connection and then allow individual control of each led.

You can connect your Corsair iCUE SP120 RGB Pro rgb header to the lighting node core and the fans to the copro and control the fans and rgb of the fans using icue. Make sure you connect the usb of the lighting node core to the copro for seemless control. Yes all corsair hardware can be interlinked

After reading what you had to say and reading what a lot of others said...
Looks like I need to change my plans!
Apparently 4 LED strips come with CoPro which is interesting and with ALL fan functions working through
CoPro and iCUE software will make the fan functions a much simpler setup!

Now just to find someone who's posted the ultimate setup instructions!

search the internet. many guides on here. hell i would even do a video call if need be

DJ Tucker wrote: ↑Fri Nov 20, 2020 1:02 pm search the internet. many guides on here. hell i would even do a video call if need be

Yes Sir! I have been doing that!
Pretty sure I've got it!
Here's a pic of a layout that will probably fill my needs!
Also, I ordered the CoPro last night(This morning for you guys)
Not so sure LED strips are included. But thats ok! I can live without them!

The copro doesn't come with led strips. That's a good guide to follow. What color will you have the fan set to?