Page 1 of 1
Affinty Setter for SMP
Posted: Mon Oct 22, 2007 6:28 pm
by dicecca112
I was a bit skeptical, but I ran it overnight and it actually did something. It takes a good 5-10 frames before it takes hold. Went from 1160ppd to 1260ppd on a SMP 2653. Knocked off about a minute per frame off. Works better than manually assigned Affinity in Task Manager or Process Explorer. Well worth the download.
Works best for CPUs with a unified cache (ie Intel C2Ds), and seems to work better with duals than quads, but helps nevertheless. Most reports on AMD says this doesn't work and usually made times worse.
http://forum.folding-community.org/fpos ... tml#202668
Re: Affinty Setter for SMP
Posted: Wed Oct 24, 2007 6:51 pm
by dicecca112
USE IT BUMP!
Re: Affinty Setter for SMP
Posted: Sun Dec 23, 2007 8:01 pm
by KnightRid
Bump again
I added the MSI file - if you want the setup.exe let me know since the link no longer seems to be valid 
Mike
Well it seems I cant find ANY format i can upload it in :p not even jpg since it is over 256kb so here is a divshare link - the zip includes both the exe and msi files - both are the same I believe, just that some people cant run msi files.
http://www.divshare.com/download/3225349-873 deleted due to old version.
Re: Affinty Setter for SMP
Posted: Mon Dec 24, 2007 11:09 am
by The Black Pumpkin
Any more word on whether this works ok for AMD's? Or is it still not ok.
Re: Affinty Setter for SMP
Posted: Mon Dec 24, 2007 11:34 am
by dicecca112
works fine for AMD's now
Re: Affinty Setter for SMP
Posted: Mon Dec 24, 2007 3:56 pm
by Bwall
Didn't have much luck with it on the E6700, I'll give it another shot now that I formatted. Had really great luck with it running two SMP's on the quad core though, dropped almost 2 minutes on each.
Re: Affinty Setter for SMP
Posted: Mon Dec 24, 2007 3:57 pm
by dicecca112
the way around that is to run one in Windows and one in Vmware.
Re: Affinty Setter for SMP
Posted: Fri Dec 28, 2007 5:30 pm
by martini161
i am currently trying to use this, but when i try to run multiple instances of smp one works, and one doesnt. here is the log for the one that doesnt
Code: Select all
--- Opening Log file [January 1 07:53:05]
# SMP Client ##################################################################
###############################################################################
Folding@Home Client Version 5.91beta5
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Program Files\Folding@Home Windows SMP Client V1.012
Executable: C:\Program Files\Folding@Home Windows SMP Client V1.012\fah.exe
[07:53:05] Configuring Folding@Home...
[07:54:00] - Ask before connecting: No
[07:54:00] - User name: martini161 (Team 38296)
[07:54:00] - User ID: 2FD7595207FD0130
[07:54:00] - Machine ID: 1
[07:54:00]
[07:54:00] Work directory not found. Creating...
[07:54:00] Could not open work queue, generating new queue...
[07:54:00] - Preparing to get new work unit...
[07:54:00] + Attempting to get work packet
[07:54:00] - Connecting to assignment server
[07:54:03] - Successful: assigned to (0.0.0.0).
[07:54:03] + News From Folding@Home: Welcome to Folding@Home
[07:54:03] Work Unit has an invalid address.
[07:54:03] - Error: Attempt #1 to get work failed, and no other work to do.
Waiting before retry.
[07:54:10] + Attempting to get work packet
[07:54:10] - Connecting to assignment server
[07:54:11] - Successful: assigned to (0.0.0.0).
[07:54:11] + News From Folding@Home: Welcome to Folding@Home
[07:54:11] Work Unit has an invalid address.
[07:54:11] - Error: Attempt #2 to get work failed, and no other work to do.
Waiting before retry.
[07:54:26] + Attempting to get work packet
[07:54:26] - Connecting to assignment server
[07:54:27] - Successful: assigned to (0.0.0.0).
[07:54:27] + News From Folding@Home: Welcome to Folding@Home
[07:54:27] Work Unit has an invalid address.
[07:54:27] - Error: Attempt #3 to get work failed, and no other work to do.
Waiting before retry.
[07:54:51] + Attempting to get work packet
[07:54:51] - Connecting to assignment server
[07:54:52] - Successful: assigned to (0.0.0.0).
[07:54:52] + News From Folding@Home: Welcome to Folding@Home
[07:54:52] Work Unit has an invalid address.
[07:54:52] - Error: Attempt #4 to get work failed, and no other work to do.
Waiting before retry.
[07:55:34] + Attempting to get work packet
[07:55:34] - Connecting to assignment server
[07:55:34] - Successful: assigned to (0.0.0.0).
[07:55:34] + News From Folding@Home: Welcome to Folding@Home
[07:55:34] Work Unit has an invalid address.
[07:55:34] - Error: Attempt #5 to get work failed, and no other work to do.
Waiting before retry.
[23:11:31] + Attempting to get work packet
[23:11:31] - Connecting to assignment server
[23:11:40] - Successful: assigned to (0.0.0.0).
[23:11:40] + News From Folding@Home: Welcome to Folding@Home
[23:11:40] Work Unit has an invalid address.
[23:11:40] - Error: Attempt #6 to get work failed, and no other work to do.
Waiting before retry.
Folding@Home Client Shutdown at user request.
Folding@Home Client Shutdown.
--- Opening Log file [December 28 23:13:05]
# SMP Client ##################################################################
###############################################################################
Folding@Home Client Version 5.91beta5
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Program Files\Folding@Home Windows SMP Client V1.012
Executable: C:\Program Files\Folding@Home Windows SMP Client V1.012\fah.exe
[23:13:05] - Ask before connecting: No
[23:13:05] - User name: martini161 (Team 38296)
[23:13:05] - User ID: 2FD7595207FD0130
[23:13:05] - Machine ID: 1
[23:13:05]
[23:13:05] Loaded queue successfully.
[23:13:05] - Preparing to get new work unit...
[23:13:05] + Attempting to get work packet
[23:13:05] - Connecting to assignment server
[23:13:06] - Successful: assigned to (0.0.0.0).
[23:13:06] + News From Folding@Home: Welcome to Folding@Home
[23:13:06] Work Unit has an invalid address.
[23:13:06] - Error: Attempt #1 to get work failed, and no other work to do.
Waiting before retry.
[23:13:20] + Attempting to get work packet
[23:13:20] - Connecting to assignment server
[23:13:20] - Successful: assigned to (0.0.0.0).
[23:13:20] + News From Folding@Home: Welcome to Folding@Home
[23:13:20] Work Unit has an invalid address.
[23:13:20] - Error: Attempt #2 to get work failed, and no other work to do.
Waiting before retry.
[23:13:37] + Attempting to get work packet
[23:13:37] - Connecting to assignment server
[23:13:43] + Could not connect to Assignment Server
[23:13:43] - Successful: assigned to (0.0.0.0).
[23:13:43] + News From Folding@Home: Welcome to Folding@Home
[23:13:43] Work Unit has an invalid address.
[23:13:43] - Error: Attempt #3 to get work failed, and no other work to do.
Waiting before retry.
[23:14:16] + Attempting to get work packet
[23:14:16] - Connecting to assignment server
[23:14:20] - Successful: assigned to (0.0.0.0).
[23:14:20] + News From Folding@Home: Welcome to Folding@Home
[23:14:20] Work Unit has an invalid address.
[23:14:20] - Error: Attempt #4 to get work failed, and no other work to do.
Waiting before retry.
[23:15:09] + Attempting to get work packet
[23:15:09] - Connecting to assignment server
[23:15:10] - Successful: assigned to (0.0.0.0).
[23:15:10] + News From Folding@Home: Welcome to Folding@Home
[23:15:10] Work Unit has an invalid address.
[23:15:10] - Error: Attempt #5 to get work failed, and no other work to do.
Waiting before retry.
[23:16:31] + Attempting to get work packet
[23:16:31] - Connecting to assignment server
[23:16:42] - Successful: assigned to (0.0.0.0).
[23:16:42] + News From Folding@Home: Welcome to Folding@Home
[23:16:42] Work Unit has an invalid address.
[23:16:42] - Error: Attempt #6 to get work failed, and no other work to do.
Waiting before retry.
Folding@Home Client Shutdown at user request.
Folding@Home Client Shutdown.
--- Opening Log file [December 28 23:23:53]
# SMP Client ##################################################################
###############################################################################
Folding@Home Client Version 5.91beta5
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Program Files\Folding@Home Windows SMP Client V1.012
Executable: C:\Program Files\Folding@Home Windows SMP Client V1.012\fah.exe
[23:23:53] - Ask before connecting: No
[23:23:53] - User name: martini161 (Team 38296)
[23:23:53] - User ID: 2FD7595207FD0130
[23:23:53] - Machine ID: 1
[23:23:53]
[23:23:53] Loaded queue successfully.
[23:23:53] - Preparing to get new work unit...
[23:23:53] + Attempting to get work packet
[23:23:53] - Connecting to assignment server
[23:23:57] - Successful: assigned to (0.0.0.0).
[23:23:57] + News From Folding@Home: Welcome to Folding@Home
[23:23:57] Work Unit has an invalid address.
[23:23:57] - Error: Attempt #1 to get work failed, and no other work to do.
Waiting before retry.
[23:24:15] + Attempting to get work packet
[23:24:15] - Connecting to assignment server
[23:24:15] - Successful: assigned to (0.0.0.0).
[23:24:15] + News From Folding@Home: Welcome to Folding@Home
[23:24:15] Work Unit has an invalid address.
[23:24:15] - Error: Attempt #2 to get work failed, and no other work to do.
Waiting before retry.
[23:24:31] + Attempting to get work packet
[23:24:31] - Connecting to assignment server
[23:24:31] - Successful: assigned to (0.0.0.0).
[23:24:31] + News From Folding@Home: Welcome to Folding@Home
[23:24:31] Work Unit has an invalid address.
[23:24:31] - Error: Attempt #3 to get work failed, and no other work to do.
Waiting before retry.
[23:25:00] + Attempting to get work packet
[23:25:00] - Connecting to assignment server
[23:25:00] - Successful: assigned to (0.0.0.0).
[23:25:00] + News From Folding@Home: Welcome to Folding@Home
[23:25:00] Work Unit has an invalid address.
[23:25:00] - Error: Attempt #4 to get work failed, and no other work to do.
Waiting before retry.
[23:25:54] + Attempting to get work packet
[23:25:54] - Connecting to assignment server
[23:25:54] - Successful: assigned to (0.0.0.0).
[23:25:54] + News From Folding@Home: Welcome to Folding@Home
[23:25:54] Work Unit has an invalid address.
[23:25:54] - Error: Attempt #5 to get work failed, and no other work to do.
Waiting before retry.
[23:27:27] + Attempting to get work packet
[23:27:27] - Connecting to assignment server
[23:27:27] - Successful: assigned to (0.0.0.0).
[23:27:27] + News From Folding@Home: Welcome to Folding@Home
[23:27:27] Work Unit has an invalid address.
[23:27:27] - Error: Attempt #6 to get work failed, and no other work to do.
Waiting before retry.
Re: Affinty Setter for SMP
Posted: Fri Dec 28, 2007 5:32 pm
by martini161
oh btw this is happening as i post this so its not my internet connection
Re: Affinty Setter for SMP
Posted: Fri Dec 28, 2007 5:34 pm
by dicecca112
SMP Server is down, nothing to do with the Affinity Setter
Re: Affinty Setter for SMP
Posted: Fri Dec 28, 2007 5:36 pm
by martini161
ok thanks
Re: Affinty Setter for SMP
Posted: Thu Jan 17, 2008 12:46 am
by DaIceMan
So, is this worth using with an overclocked E6600 that is already running at 13:15 per frame? Is the link broken, or am I missing the point of the link?
Re: Affinty Setter for SMP
Posted: Thu Jan 17, 2008 11:50 am
by Bwall
By setting the affinity manually I get a nice drop in time, a little over a minute or more per percent. I tried this before a couple of times on a dual core and it didn't do anything so I may have not gotten it working correctly. There is a difference by setting the affinity though.
I used it on my quad core while running two clients and it made a big difference, too bad running two client's is not worth the hassle. Shutting one client down causes the other client to crash and corrupt its work unit. There are ways around it but on a system that you use daily and occasionally game with, no good.
Re: Affinty Setter for SMP
Posted: Thu Jan 17, 2008 1:12 pm
by vbironchef
I did not feel like making a new post, just a note; make sure everyone is running the lastest version of smp client. I just updated mine. Fold on!
Re: Affinty Setter for SMP
Posted: Mon Feb 04, 2008 11:00 am
by Bwall
For those that haven't been able to get the program.
http://code.google.com/p/fah-smp-affinity-changer/
I'm running this on all three SMP rigs and notice a difference on each....the largest difference is on the Quad core running two clients, though the E8400 seems to benefit quite a bit also.
Re: Affinty Setter for SMP
Posted: Mon Mar 03, 2008 9:40 pm
by DaIceMan
this worked well on my E6400 machine, but actually slowed my E6600 machine... so I uninstalled it. I'll probably give it another shot later (next time I reinstall the F@H client or reformat the computer).
Re: Affinty Setter for SMP
Posted: Sun Feb 22, 2009 7:48 pm
by geokilla
Sorry to bring up such an old thread, but has anyone noticed a PPD increase using this on their dual core machines? I know this program lets quad cores run 2 SMP clients, but does it benefit dual core users with 1 SMP + GPU client?