Heres my case
Ive been told while the its on it sounds like a light Aircraft and i have successfully created a nuclear reactor
In about a week of so im lifting it all up by about an inch and routering out the bottom to put the cables underneath when thats done ill post some new pics.
Nuclear Reactor ***Beware***
BioHazard template
Hello on my case (above) you can see i have a Wooden base. Does anyone have any cool templates i could print stick on and spray paint onto the peice of wood?
Thanks
Kappage
Thanks
Kappage
I used pumpkin carving templates to cut out the sides of cases already Dunno if they will work for what you want or not.
They have templaes for watermelons, etc also - you should be able to find a bunch in the net.
Mike
They have templaes for watermelons, etc also - you should be able to find a bunch in the net.
Mike
Remember, I am opinionated and nothing I say or do reflects on anyone or anything else but me
- Dragon_Cooler
- Legit Extremist
- Posts: 2405
- Joined: Wed Oct 12, 2005 10:17 am
- Location: DFW Texas
- Contact:
- DaIceMan
- Legit Extremist
- Posts: 1599
- Joined: Tue Jul 18, 2006 10:31 pm
- Location: Springfield-ish, Missouri
Hard to tell from the pics, but I would guess that some type of isolation foam on top of the wood and some rubber feet might help cut down the noise a bunch.
Gamer - Thermaltake Element S | PC Power & Cooling Silencer 750 Black | Gigabyte GA-EP45-DS3L | Intel E8400 | Arctic Cooling Freezer 7 Pro | 4GB OCZ Reaper Ram | XFX 8800GTX | Creative X-Fi XtremeGamer | Seagate 7200.10 320GB
HTPC / Folder - Palit 9600GT 1GB Sonic | AMD Phenom 9600 | Corsair DHX 4GB | ECS GF8200A | OCZ StealthXStream 500
Thanks to Palit, AMD, Corsair and ECS for sponsoring the 2008 Folding Give-away!
HTPC / Folder - Palit 9600GT 1GB Sonic | AMD Phenom 9600 | Corsair DHX 4GB | ECS GF8200A | OCZ StealthXStream 500
Thanks to Palit, AMD, Corsair and ECS for sponsoring the 2008 Folding Give-away!
Sorry jsut read this over again and i noticed you said Pumpkin carving templates pitty i cant get them because i live in Australia and no Halloween over here.KnightRid wrote:I used pumpkin carving templates to cut out the sides of cases already Dunno if they will work for what you want or not.
They have templaes for watermelons, etc also - you should be able to find a bunch in the net.
Mike
http://www.stencilrevolution.com/photopost/
Try that site. You might have to look around a bit though.
Try that site. You might have to look around a bit though.
Intel Core2Duo e6600 @ 3.78GHz/1.47v n ASUS P5N-E sli n 4x1GB Crucial Ballistix Tracer PC2 8500(currently 5-5-5-15-2t) n FSP Group (Fortron) FX Series FX700-GLN-E 700W Power Supply n APEVIA X-Navigator ATXA8NW-AL Case n eVGA GeForce 7600GT 256MB GDDR3 n 1.25TB Seagate Barracudas(3 setup as hot-swap) n AuzenTech XMYSTIQUE7.1 Sound Card n Innovatek Eheim HPPS Plus 12V WaterPump n Danger Den TDX CPU block n Swiftech MCR320-QP (3x120mm) Radiator