Legit Reviews

my parents gave me one of their old computers when i came to college. well, it was the biggest POS i've ever seen, just wouldn't cut it, so i decided to start upgrading. i didn't know much about computers when i started, so i taught myself as i went along. i slowly replaced every single part, and in the end, i had a completely different machine. this is what I ended up with, and i'm still not completely done. i will be adding a blow hole on the top of my case for an 80mm fan (might add an acrylic window also), and will be adding a 5" LCD display at the front of the case (it will replace the lit up silver square section under the power/reset buttons. i'll either have a diagnostics programming running on that screen, and/or media player and visulizations. i may do some other mods, but am not sure exactly what yet. i'll update the thread when i do.

by the way, what dremel bit would work best for cutting out the blowhole?


SETUP:
>ATX Phoenix-X Case
>Cooler Master Musketeer System Dynamics Detector
>Vantec Nexus fan and light controller with 2 blue cathode lights
>4 80mm Vantec Stealth fans, 1 40mm Vantec fan (soon to add a 5th 80mm at top of case)
>Biohazard fan grills
>Aspire 520watt Power Supply
>Asus K8N-E Deluxe Motherboard
---Socket 754 for AMD CPU
---NVIDIA nForce3 250 Gb
---Dual RAID
---8-channel Audio
>AMD Athlon 64 3200+ processor
>1GB DDR ram
>ATI Radeon All-In Wonder 9600 XT video card
>2 Seagate 80GB SATA hard drives, 7200rpm, 8mb buffer
>Seagate 120GB hard drive, 7200rpm, 8mb buffer
>NEC 16X Double Layer DVD±RW Drive
>Sony 52x24x52x CD-R/RW drive
>Sony floppy drive
>Megavision 17" LCD screen
>Microsoft Cobalt Wireless IntlliMouse Explorer
>Logitech Elite Keyboard
>Logitech Z-640 5.1 surround speakers
>Round IDE cables
>Vantec PCI and Ram slot protectors (blue)
>Microsoft XP Pro
>HP PSC 2175 all-in-one printer/scanner/copier/card reader

thats a great looking system, i like the case you have. also is that a beer cooler on the left? looks like one to me.

its a Brookstone iceless "beverage" cooler.

hell yeah i want one.. that thing is the s***

Looks nice, but did you only put that sticker on it?
Edit: for me to fully appreciate a premodded case, you must at least manage your wires.

i don't have the time nor the tools to get into any serious mods at the moment, so for now, this is all i got. yes, that is just a sticker.

this is an older pic, i have since put in a different power supply, which has sleeved cables. it nice and clean inside.

Nice job man.
picky picky DA......I'm the same way, I'll go through hundreds of zip ties a month

I'm picky because im a modder. I don't appreciate premods like I should. Especially if they are expensive premods.

And as for wire management, it just looks ugly to have a nest of wires when you have a window :\ Common sense, doesnt require tools, and wont take more then an hour to make it look spotless.

yep, I totally agree.
whenever I work on someones sytem, the first thing I do is pull it apart and rewire it. they are usually amazed at how dirty and nasty it is before i do it, and how much cleaner and cooler it is afterward

deadly-app wrote:I'm picky because im a modder. I don't appreciate premods like I should. Especially if they are expensive premods.

And as for wire management, it just looks ugly to have a nest of wires when you have a window :\ Common sense, doesnt require tools, and wont take more then an hour to make it look spotless.

Yeah, I'd agree too.

Syclone, post some new pics with some wire management.
Even though it is a "pre-modded" case, it still looks nice. Sometimes those premods jsut look awefuly hideous. But there are still a lot of ways you can mod it yourself and be able to "customize" it a little to make it unique
Just ask if you want some ideas!

Looks good, just give it some good ol' wire management lovin' and it'll be even better.