DDC PLUS now available

stev · Post by **stev** » Tue Mar 28, 2006 3:06 pm

Our good friends at Danger Den are now supplying the DDC PLUS pump in North America.

http://www.dangerdenstore.com/product.p ... t=4&page=1

Currently, Swiftech and Corsair only carry the 10W version in NA. This is slightly over the D5 P1 (pot-1) setting.

The DDC PLUS is rated at 12V@18W, 1.5A, 720LPH. This is close to the D5 P3 setting.

The flow would be higher, if the Lee "ROBOTECH" Garbutt mod is done. It should place the pump into the range between the P4 to P5 setting found on the D5. This is not bad for 3/8" (9.5~10mm) size fittings.

The best part is, the price of the pump did NOT increase, but the performance did.

Stev

Post by **Apoptosis** » Tue Mar 28, 2006 3:40 pm

Good news for the watercooling community and since i know the price of the pump before the retailer gets it holy markup.

infinitevalence · Post by **infinitevalence** » Tue Mar 28, 2006 8:17 pm

dear god... $75... i was going to buy like 10 but screw that.

kenc51 · Post by **kenc51** » Wed Mar 29, 2006 4:36 am

I can testify that this is a very nice pump!!!

It is way more powerfull than the older model.....

'bout time it's available over your side of the water...:p

stev · Post by **stev** » Thu Mar 30, 2006 2:49 pm

infinitevalence wrote:dear god... $75... i was going to buy like 10 but screw that.

It's always been that price. The best part is, now you get MORE for the same price.

stev · Post by **stev** » Tue Apr 18, 2006 6:30 am

kenc51 wrote:I can testify that this is a very nice pump!!!

It is way more powerfull than the older model.....

'bout time it's available over your side of the water...:p

Ken,

Do you have this 18W pump? If so, is it the standard version or did you upgrade to a plexi cover or plexi reservoir?

Stev

Post by **Apoptosis** » Tue Apr 18, 2006 7:03 am

stev wrote:
infinitevalence wrote:dear god... $75... i was going to buy like 10 but screw that.

It's always been that price. The best part is, now you get MORE for the same price.

Well at least that is a good thing ;)

kenc51 · Post by **kenc51** » Tue Apr 18, 2006 7:11 am

stev wrote:
kenc51 wrote:I can testify that this is a very nice pump!!!

It is way more powerfull than the older model.....

'bout time it's available over your side of the water...:p

Ken,

Do you have this 18W pump? If so, is it the standard version or did you upgrade to a plexi cover or plexi reservoir?

Stev

It's the DCC+ (600L/Hr --> old = 420l/Hr) --> It doesn't have the included Res.
http://www.alphacool.de/xt/product_info ... 1plus.html

Alphacool wrote:Technical data:

Dimensions: (WxLxH) 62x62x38mm (without connections)
Motor construction type: electronically commuted ball-motor
Working voltage: 12 V DC Voltage
Admissible voltage area: 6 to 13,2 V
Delivery height: at 12V: 4,7m
Max. delivery rate: 600L/h
Delivery media: water, water-/glycol compounds
Max. system temperature: 60° C
Medium-affecting parts: stainless steel 1.4571, PPS-GF40, EPDM O-sealing rings, alumina, hard carbon
Connections: 2x 3/8" hose connection

Doesn't mention the wattage

infinitevalence · Post by **infinitevalence** » Tue Apr 18, 2006 12:09 pm

well i just got 4 Swifty MCP655's for ~ $220

so im in good shape for the time being.

stev · Post by **stev** » Wed Apr 19, 2006 1:01 pm

kenc51 wrote: Doesn't mention the wattage

If you have the PLUS, you're at 18W.