Page 1 of 1
Water cooling question
Posted: Wed Feb 20, 2008 4:13 pm
by OTIKA
im looking at water cooling my next rig. ive been looking around and was wandering which is better.
Danger Din / Hardware Labs
Swiftech
Thermochill
Plz advise,
James
Re: Water cooling question
Posted: Wed Feb 20, 2008 5:57 pm
by martini161
swiftech, unless you have the money to spend on thermochill (they only make rads any way)
heres what i would reccomend for a good lcs:
d-tek fuzion cpu block
swiftech 2x120mm rad
swiftech mcp 655 pump
swiftech micro res
all connected with 1/2 tubing
and if you want to cool more:
swiftech mcw 30 chipset block
swiftech mcw 60 gpu block
Re: Water cooling question
Posted: Wed Feb 20, 2008 6:37 pm
by DMB2000uk
martini's suggestions are pretty much spot on.
Can you give us a list of what this system will be cooling please (to know if we should suggest a bigger radiator, or something).
Dan
Re: Water cooling question
Posted: Wed Feb 20, 2008 6:52 pm
by OTIKA
well i just wanted to know bout which radiator was best for now. the MM case i am ordering comes with the mounts alrdy in. its just that thermochill is one and dd & swiftech is another mount. just wanted to know if thermochill was good cuz they wont have the dd/swiftech mount in for a few weeks.
Re: Water cooling question
Posted: Wed Feb 20, 2008 8:04 pm
by martini161
it depends, is low noise a big factor? if not, its not worth it to buy a thermochill
and u might wanna pm bio, hes the most knowledge able about this stuff
Re: Water cooling question
Posted: Wed Feb 20, 2008 11:32 pm
by OTIKA
martini161 wrote:it depends, is low noise a big factor? if not, its not worth it to buy a thermochill
and u might wanna pm bio, hes the most knowledge able about this stuff
no noise aint a factor. hell ima have 9 120mm and 4 80mm fans on this thing. but thanks ill msg him and ask him bout it.
Thank you
Re: Water cooling question
Posted: Thu Feb 21, 2008 8:03 am
by martini161
yeah then get a swiftech. the thermaltakes only get about a 10% increase over the swiftechs in high airflow situation, but in low airflow, low noise is where they shine and get a 40% increase. and if you havent already, check out his monster rig thread in the modding section
Re: Water cooling question
Posted: Thu Feb 21, 2008 12:15 pm
by kenc51
The Thermochill PA120.3 is the best RAD out there, the only problem is it's very expensive if your from the states (They're made in the UK)
Re: Water cooling question
Posted: Thu Feb 21, 2008 1:41 pm
by Bio-Hazard
The performance difference between the Thermochill radiator and the other big name companies starts to equal out as the air flow through the radiator increases (as well as noise levels). So when you start getting close to 100CFM per fan, a Thermochill PA 120.3 and a Swiftech MCR320 (yes I own and tested both) are fairly close performance wise.
The Thermochill does have a much higher build and overall finish quality than any other radiator I have owned to date, the things are built like a tank, it's just a much higher quality product over all, but at extremely high air flow settings, you really won't notice any big difference in performance over any of the other name brands.
Re: Water cooling question
Posted: Thu Feb 21, 2008 2:08 pm
by martini161
kenc51 wrote:The Thermochill PA120.3 is the best RAD out there, the only problem is it's very expensive if your from the states (They're made in the UK)
well how much do you guys pay for them?
Re: Water cooling question
Posted: Thu Feb 21, 2008 3:06 pm
by Bio-Hazard
Price: £48.50 (Excluding: VAT at 17.5%)
That comes out to:
48.50 GBP = 95.1843 USD
http://www.xe.com/ucc/convert.cgi
That's direct from Thermochill
http://www.thermochill.com/acatalog/pa_series.html
Re: Water cooling question
Posted: Thu Feb 21, 2008 4:12 pm
by kenc51