830 stacker and v1 cooler? will it fit?

[vidiotking]

can anyone tell me if a thermaltake v1 cpu cooler will fit inside a coolmaster 830 case? i have read that some larger coolers will not fit w/o takeing the coolmaster case side fan panel out? any insites?
thanks in advance

[Digerati]

I'm not a 100% sure, as I have never seen that specific cooler installed, but a TRUE 120 will need the side fans to be gone if you install it, so I assume this one is the same.

[vidiotking]

i appreciate your response. but i am unsure wut u mean by a 'true 120'? cud u clarify? thanks.

[Digerati]

i appreciate your response. but i am unsure wut u mean by a 'true 120'? cud u clarify? thanks.

Thermalright Ultra-120 Extreme, commonly referred to as TRUE 120.

[vidiotking]

so you're saying these two coolers have about the same hight. thanks! guess ill use another cooler.

[DMB2000uk]

The V1 is actually about 23mm smaller than the TRUE.
The manufacturers specs list the height of the V1 at 143mm.
So if you have a tape measure and the case already, you can measure it out.

Dan

[HôS]

I have the CoolerMaster Stacker 830 with a Zalman CNPS9500A LED CPU fan installed on my motherboard .
Dimensions are listed at 85mm L x 112mm W x 125mm H . The actual fan is 92mm in diameter and 25mm in depth .
I would highly recommend this fan for this case and any compatible motherboard .
It fits nicely inside the case with fan panel in place and all 4 side panel fans installed .
It's quiet and extremely effective .