I am curious to know if anyone else has encountered a problem with the 4pin 12V CPU cable not being long enough to reach the plug on the motherboard.
My setup is as follows:
Antec P182 case, power supply mounted in bottom
OCZ 600W PSU
Asus P5N-E SLI mobo
Intel Q6600 CPU
Western Digital Raptor 75Gb SATA
Wester Digital 250Gb SATA
eVga 9600GT PCI-express GPU
Creative Sound Blaster X-Fi Platinum
Now my query is, where the PSU is located and the 4pin 12V plug is located it just reaches with tightly wrapped under the extruding part of my video card, and through the Northbridge heatsink, but I would like to have some slack with the cable. Is there a way to extend the 4pin 12V cable or would my options be to, a) buy a different PSU, b) a different case, c) buy a different motherboard with the 4 pin plug located on the RAM side of the CPU socket?
If a different psu is needed, what is recommended?
Thanks for any insight,
Craig
4pin 12V PSU cable length
- kenc51
- Legit Extremist
- Posts: 5167
- Joined: Thu Jun 23, 2005 1:56 pm
- Location: Dublin, Republic of Ireland
- Contact:
Re: 4pin 12V PSU cable length
You could get something like this
http://www.performance-pcs.com/catalog/ ... ts_id=4640
http://www.performance-pcs.com/catalog/ ... ts_id=4640
Re: 4pin 12V PSU cable length
Yup like Ken said a 4 pin extension is what you need.
"The democracy will cease to exist when you take away from those who are willing to work and give to those who would not."
-Thomas Jefferson
-Thomas Jefferson
Re: 4pin 12V PSU cable length
I don't think that PSU manufacturers have taken the bottom-mounting PSU cases into consideration, because I had to buy one of those extenders to connect my motherboard inside my Antec Twelve Hundred case. 

Case=Antec Twelve Hundred
Mobo=EVGA 790i Ultra SLI
CPU=Intel Q9450 OC @ 3.7 Ghz
GPU=GTX 280 X 2 SLI
RAM=Corsair DDR3 1600 9-9-9-24
Sound=Creative X-fi Xtreme Gamer
PSU=SilverStone DA1000 1000W
3DMark Vantage=Overall-21,591
CPU-43,435
GPU-18,491
Mobo=EVGA 790i Ultra SLI
CPU=Intel Q9450 OC @ 3.7 Ghz
GPU=GTX 280 X 2 SLI
RAM=Corsair DDR3 1600 9-9-9-24
Sound=Creative X-fi Xtreme Gamer
PSU=SilverStone DA1000 1000W
3DMark Vantage=Overall-21,591
CPU-43,435
GPU-18,491
Re: 4pin 12V PSU cable length
how are you liking the behemoth that is the 1200.
"The democracy will cease to exist when you take away from those who are willing to work and give to those who would not."
-Thomas Jefferson
-Thomas Jefferson
Re: 4pin 12V PSU cable length
Thanks for the help. I searched for that on the internet but could not find any info.
Much appreciated, Craig
Much appreciated, Craig
Re: 4pin 12V PSU cable length
I'm enjoying it very much. I've always been very anal about the cable management within my case and my previous Antec 900 was not conducive to an organized layout. The Twelve hundred, as you very appropriately dubbed it, is indeed a behemoth. The space behind the motherboard tray is great for routing the mess of cables, freeing up the main corridor so the 7 120mm fans and 1 200mm fan can create their mini-vortex of airflow.bubba wrote:how are you liking the behemoth that is the 1200.
Huge. Heavy. I love it.

Case=Antec Twelve Hundred
Mobo=EVGA 790i Ultra SLI
CPU=Intel Q9450 OC @ 3.7 Ghz
GPU=GTX 280 X 2 SLI
RAM=Corsair DDR3 1600 9-9-9-24
Sound=Creative X-fi Xtreme Gamer
PSU=SilverStone DA1000 1000W
3DMark Vantage=Overall-21,591
CPU-43,435
GPU-18,491
Mobo=EVGA 790i Ultra SLI
CPU=Intel Q9450 OC @ 3.7 Ghz
GPU=GTX 280 X 2 SLI
RAM=Corsair DDR3 1600 9-9-9-24
Sound=Creative X-fi Xtreme Gamer
PSU=SilverStone DA1000 1000W
3DMark Vantage=Overall-21,591
CPU-43,435
GPU-18,491