Legit Reviews

Here is my issue, I am currently running a Crucial M4 128 Gig SSD SATA 6gb/s on a P8p67 EVO motherboard on the SATA 6GB/s controller (Intel one). Now the issue is this, my computer stops recognizing the SSD, like the SSD gets turned off. And it requires me to turn off the computer unplug the SATA Cable plug it back in and everything fine, until the computer decides to not recognize the SSD. The OS is installed onto the SSD. what would be causing this issue? Last time this happened it turned out the SSD needed to be replaced.

First i'd try another SATA cable

did that, also tried running it off of the sata 3gbs controller and it does the same thing. SSD toasted.

Have you tried updating the firmware?

http://www.crucial.com/support/firmware.aspx

No I haven't, ok looks like that is what I will be doing thank you.

The SSD firmware update should fix that. Let me know if it doesn't and I'll ping Crucial for you.

okies, have to wait till tonight, as I am gonna be gone for a good part of today. Thank you sir.

Well found out I had more time on my hands then I originally thought, well of course I had to set my brain back a week (I thought it was the 24th not the 17th). So I flashed the Firmware of the SSD to 000f from 0009 (I tired the 003x one and could never get it to stick so I gave up) time will only tell if it works.

well after the update the computer has yet had any issues. thank you everyone for your help.

DragonFury wrote:well after the update the computer has yet had any issues. thank you everyone for your help.

Keep an eye out on future updates though. They have a good number of them and they usually include Flash enhancements for performance and longevity.