Page 1 of 1
Used the NVIDIA- Tune System for the 1st time
Posted: Sun Jan 20, 2008 10:38 am
by Aratae
I did the Coarse Tune (20 min) with these results:
FSB (CPU Bus) original: 200Mhz current: 218Mhz +9% change
AGP/PCI-E Bus original: 2500Mhz current: 2850Mhz +14% change
so that tweaked my system some and will help performance?
Thx for any insight
Re: Used the NVIDIA- Tune System for the 1st time
Posted: Sun Jan 20, 2008 5:14 pm
by Zertz
PCI-E bus at 2Ghz?? Isn't that usually at 100Mhz?
The FSB being higher makes the CPU frequency higher, so yes performance will improve.
Re: Used the NVIDIA- Tune System for the 1st time
Posted: Sun Jan 20, 2008 6:51 pm
by skier
i thought PCI was 166, and AGPx8 is 266, so PCIe wouldnt be THAT fast
is that right?
Re: Used the NVIDIA- Tune System for the 1st time
Posted: Sun Jan 27, 2008 2:41 pm
by maj0r_pawnage
Yeah ntune is buggy
, it says my cpu speed is 9.75976GHz, with an fsb of 1394.254MHz
Re: Used the NVIDIA- Tune System for the 1st time
Posted: Sun Jan 27, 2008 3:01 pm
by stev
I had tried nTune, but it crashed my system soooo bad, that I had to uninstall the card, use the integrated graphics chipset, un-install the nVida drivers via Safe Mode reboot and start the process of reinstalling the newer card and avoid using the nTune tweak tool.
That was a lot of work to undo for something that should have been easy to try out.
Re: Used the NVIDIA- Tune System for the 1st time
Posted: Mon Jan 28, 2008 2:04 am
by ibleet
Zertz wrote:PCI-E bus at 2Ghz?? Isn't that usually at 100Mhz?
Yes, that is normally a 100Mhz frequency.