I have Pentium 4 2.6ghz processer with 800mhz FSB. When I boot the Computer I get an Overclocking Failed.
It is not overclocked. It defaults to 266mhz memory and I have 400mhz memory installed. I tried this memory on an identical MB and it works fine.
Asus P4C800 Deluxe
-
kenc51
- Legit Extremist
- Posts: 5167
- Joined: Thu Jun 23, 2005 1:56 pm
- Location: Dublin, Republic of Ireland
- Contact:
Re: Asus P4C800 Deluxe
Welcome 
Sounds like the bios is not saving your settings.
Remove the battery for an hour or so and re-test. If that doesn't work, you'll need to replace it. That board is old and the battery would be suspect IMO
Sounds like the bios is not saving your settings.
Remove the battery for an hour or so and re-test. If that doesn't work, you'll need to replace it. That board is old and the battery would be suspect IMO
Re: Asus P4C800 Deluxe
I had the same thing with an Asus P5B-E and it turned out to be the Antec Power Supply. 
Phenom II 1075T,Phenom II 1090T,Intel i7 870
Gigabyte 890XA-UD3
Evga GTX460
8 GB Corsair
Agility2 120GB SSD
Dual 24" Samsungs LCD's
Gigabyte 890XA-UD3
Evga GTX460
8 GB Corsair
Agility2 120GB SSD
Dual 24" Samsungs LCD's
Re: Asus P4C800 Deluxe
I had the same problem when i was asked to fix the computer, turned out while i wasnt home and it was formatting power went out and messed up the bios oir somthing. a Reset should do it
Main Rig: C2D 6850 @ 3.0Ghz, 2Gb DDR2667Mhz @ 833Mhz 5-5-5-15 Timings , XFX xXx 8600GTS @ 730/2260 , Gigabyte Ga-945GCM-S2L
JukeBox: Currently in an Upgrade but im too lazy to do it at the moment
I² keepin it real
JukeBox: Currently in an Upgrade but im too lazy to do it at the moment
I² keepin it real