ATI Catalyst™ Software Suite Version 10.8 Release Notes
New Features
This section provides information on new features found in this release of the ATI Radeon™ Display Driver. These include the following:
- OpenGL ES 2.0 support
- Video Quality default options
- Performance enhancement for Eyefinity Quad ATI CrossFireX™ configurations
- Anti-Aliasing support for StarCraft II
OpenGL ES 2.0 support
- ATI Catalyst™ 10.8 delivers full support for OpenGL ES 2.0 specification
- Enables 3D accelerated graphics within a web browser that supports OpenGL ES 2.0
- Supported on Windows XP, Windows Vista, and Windows 7
Video Quality default options
- The Default video options for ATI Catalyst™ have been greatly enhanced to deliver the best quality video viewing experience. Users can also choose to apply these settings to Internet Video via a new checkbox control within the ATI Catalyst™ Control Center
Performance enhancement for Eyefinity Quad ATI CrossFireX™ configurations
- Performance has been greatly improved for users running with ATI Eyefinity on a Quad ATI CrossFireX™ configuration
Anti-Aliasing support for StarCraft II
- ATI Catalyst™ Control Center enabled Anti-Aliasing is now available for StarCraft
Catalyst™ Application Profiles
The following application profiles are available with this release of Catalyst™ 10.8:
- Singularity – CrossFire™ profile update
- Mafia 2 – CrossFire™ profile update
- Final Fantasy XIV Benchmark – new CrossFire™ profile
- Lord of the Rings Online – new CrossFire™ profile
- Aliens Vs. Predator – CrossFire™ profile update
Performance Improvements
The following performance gains are noticed with this release of Catalyst™ 10.8:
- Far Cry 2
Performance increases 2-6% on ATI Radeon™ HD 5800 Series single and CrossFire™ configurations
Performance increases 2-4% on ATI Radeon™ HD 5700 Series single and CrossFire™ configurations
Performance increases 3-8% on ATI Radeon™ HD 4800 Series single and CrossFire™ configurations
-Left 4 Dead 2
Performance increases 3-5% on CrossFire™ ATI Radeon™ HD 5800 series and CrossFire™ ATI Radeon™ HD 5700 series configurations
-Stormrise
Performance increases 5-10% on ATI Radeon™ HD 5600 series and ATI Radeon™ HD 5500 series configurations
Resolved Issues for All Windows Operating Systems
This section provides information on resolved issues in this release of the ATI Catalyst™ Software Suite for Windows. These include:
- HDMI default refresh rate now appears properly as 60 Hz under HDTV in Catalyst™ Control Center
- Catalyst™ Control Center - Basic wizard pane or resolution combo box in "Display Setting for Desktop Viewing" page no longer turns blank in basic view for component video mode
- "FSAA" is a selectable option in City of Heroes / City of Heroes Going Rogue™
Resolved Issues for the Windows 7 Operating System
This section provides information on resolved issues in this release of the ATI Catalyst™
Software Suite for Windows 7. These include:
- Desktop line corruption no longer observed after powering off the DP display andthen turning it on while viewing Blu-ray content
- "Borderlands" no longer fails after a duration of gameplay
- Opening numerous windows in Adobe Photoshop CS5 no longer causes applicationto fail
- Re-sizing Windows Media Player while viewing 720/1080 WMV video content no longer causes the screen to turn black
- "ARMA 2: Operation Arrowhead" game now works in CrossFire™ mode
- Shifting mouse cursor between displays no longer causes intermittent cursorcorruption or system lock up
Resolved Issues for the Windows Vista Operating System
This section provides information on resolved issues in this release of the ATI Catalyst™
Software Suite for Windows Vista. These include:
- Catalyst™ Control Center no longer fails and displays error message while transcoding specific video files on 64-bit operating systems
- AVI video no longer lags during playback within Microsoft PowerPoint slide deck
- 3D and video settings in Catalyst™ Control Center are now retained after resume from sleep/hibernate
Cool. I was looking at the calendar this morning, wondering when the next set was going to be released since the month was close to finishing. Downloading now.
I installed them and they broke CCC for me again; and this time system restore is not fixing it.
So right now, if I try and open the Catalyst control panel, using the mouse dialog box, or the start menu path, or in the control panel; the process pops up in the task manager then immediately terminates.
I wish Cyberpower would get me that GTX460 already so I can just wipe these ati drivers!
I got it to work again, but I am not sure why. I was using driver sweeper, cc cleaner, and the ati uninstaller. I also uninstalled and reinstalled the .Net Framework. I wiped every ati driver and software off the computer that I could find, then went about installing the CCC package from 10.5 and on, wiping it clear after each.That failed. Then I tried installing only the 10.8 CCC, with the standalone installer, and it worked. Even though that had previously failed before. So maybe it was .Net that was an issue, or maybe one of the previous drivers was an issue, I dont know. I made a thread about it on AMD's catalyst boards, and other people are having the same issue; and I wish I knew what it was that was causing the problem and I could tell them exactly what fixed it on my machine.
These are crap every time i boot up my machine i have to then go into CCC to change something (doesn't matter what) before the desktop goes full screen otherwise I'm left with an 1" both sides x .5" top and bottom black boarder..... WTF WTH jesus ATI every new release so far has cocked something up
Asus Crosshair V Formula AMD FX 8320 @ 3700MHz NB/HT @ 2600MHZ 2x 4GB Corsair Vengeance LP 1600 C9 1x Sapphire Radeon HD 7850 9550MHz core 1250MHz mem 1x Pioneer DVD-RW DVR212S SATA 2x Samsung HD502IJ 16MB cache 7200rpm raid0 1x Samsung HD502IJ 16MB cache 7200rpm storage 1x WD2500AAJS 8MB cache 7200rpm storage Thermolab Baram1 x 120mm CM R4 90cfm 2000rpm 1x SilverStone 120mm AP 1500rpm 37.5cfm SilverStone ST75F-P 750W PSU Full Modular SilverStone RaVeN RV02B-W
Interesting how you guys are having problems. I installed these a while back and have had no problems. I don't think I've had any improvements in any of my programs, though. I just uninstalled the previous set using control panel, reset, then installed this set. I don't care much for driver sweepers.
can you play Quake 3 with these I can't 10.7 I could 10.6 nope 10.5 yes 10.4 nope (yes i know it's an OOOOOllllllld game but i have heaps of maps n mods and works on a LAN just fine) I did d/l an DirectX port but it just failed to start...
something else I've noticed too is when watching full screen Video with MPC-HC x64 it dumps back to desktop and a window for no apparent reason
Asus Crosshair V Formula AMD FX 8320 @ 3700MHz NB/HT @ 2600MHZ 2x 4GB Corsair Vengeance LP 1600 C9 1x Sapphire Radeon HD 7850 9550MHz core 1250MHz mem 1x Pioneer DVD-RW DVR212S SATA 2x Samsung HD502IJ 16MB cache 7200rpm raid0 1x Samsung HD502IJ 16MB cache 7200rpm storage 1x WD2500AAJS 8MB cache 7200rpm storage Thermolab Baram1 x 120mm CM R4 90cfm 2000rpm 1x SilverStone 120mm AP 1500rpm 37.5cfm SilverStone ST75F-P 750W PSU Full Modular SilverStone RaVeN RV02B-W
Athlonite wrote:These are crap every time i boot up my machine i have to then go into CCC to change something (doesn't matter what) before the desktop goes full screen otherwise I'm left with an 1" both sides x .5" top and bottom black boarder..... WTF WTH jesus ATI every new release so far has cocked something up
I had exactly the same problem as noted above. So I went back to catalyst 10.4, which really seems to be the best catalyst and driver release thus far. Additionally, I was having difficulties mirroring or duplicating my second monitor. Every time I accessed my second display, after about 10 seconds or so the display would revert to extended desktop. I finally resolve this by setting up a hot key for duplicate mode, so when the display reverted back to extended desktop I executed the hotkey for duplicate mode and it seemed to stick and I haven't had a problem since.
hark wrote:I don't think ATI has fixed its support for older OpenGL games.
Isn't really nice of ATI to decide for me when it's time to give up a perfectly good game like Quake 3 Arena thanks ATI remind me to punch you bastards in the Balls for Xmas
Asus Crosshair V Formula AMD FX 8320 @ 3700MHz NB/HT @ 2600MHZ 2x 4GB Corsair Vengeance LP 1600 C9 1x Sapphire Radeon HD 7850 9550MHz core 1250MHz mem 1x Pioneer DVD-RW DVR212S SATA 2x Samsung HD502IJ 16MB cache 7200rpm raid0 1x Samsung HD502IJ 16MB cache 7200rpm storage 1x WD2500AAJS 8MB cache 7200rpm storage Thermolab Baram1 x 120mm CM R4 90cfm 2000rpm 1x SilverStone 120mm AP 1500rpm 37.5cfm SilverStone ST75F-P 750W PSU Full Modular SilverStone RaVeN RV02B-W