Gskill PC4400LE + DFI NF4 SLI-D

[eva2000]

Some more benching from me

System
3200+ CBBHD 0445 VPMW Winchester 90nm cpu water cooled
DFI NF4 SLI-D 331-3 beta bios
2x eVGA 6800U PCI-E SLI @ stock 425/1100 71.89WHL
120GB WD 1200JB
Pioneer A05 Burner
650W Silverstone SLI psu

WinXP PRO SP2 fresh install with latest updates
Nvidia 6.39 chipset drivers

9x 290mhz 2.5-3-3-7 7-14-3-2-1-4 at 2.8v vdimm

chipset = 1.6v
LDT = 1.5v
LDT 3x

CPC = Enabled
CAS Latency(CL) = 2.5
RAS to CAS(Trcd) = 3
Min RAS# Active time(Tras) = 7
Row Precharge Time(Trp) = 3
Row Cycle Time(Trc) = 7
Row Refresh Cycle Time(Trfc) = 17
Row to Row Delay(Trrd) = 3
Write Recovery Time(Twr) = 2
Write to Read Delay(Twtr) = 1
Read to Write Delay(Trwt) = 4
Refresh Period (Tref) = 3072
Write CAS Latency(Twcl) = 1
DRAM Bank Interleave = Enabled
Skew = AUTO
Skew Value = 0
DRAM Drive Strength = Level 8
DRAM Data Drive Strength = Level 1
Max Async Latency = 8ns
Read Preamble Time = 5ns
Idle Cycle Limit = 256
Dynamic Counter = Enabled
R/W Queue Bypass = 8x
Bypass Max = 4x
32 byte Granularity = Disable(8burst)
















seems this ram did better on 3500+ newcastle cpus than winnies.

[infinitevalence]

WOW just running your memory 1:1 cuts a whole second of your 1M pi i run with just about the same settings but my memroy is at 237fsb.

[eva2000]

yeah helps to keep 2.5-3-3-7 1T timings as high as possible though

[no-feer]

im kind of a noob to memory. so with that off my chest im haveing a major problem.
i have a DFI lanparty nf4 sli-d amd 64 3200.
i cant get any low latency ram to work in this dam board.

i have tried pqi pc3200 400mhz 2-3-2-6 which locks up on every game start up.i have also tried mushkin pc3200 400mhz 2-3-3-7 which carshes with irq_not_lessthan and wont play games.

the only ram that works is high latency ocz which is 3-4-4-8 YUCK!
im sure its bios settings, but i dont know where to start.
i have updated the bios to latest on dif.com

any help would greatly be appreciated!!!!
thanks