What memory should i buy o.O
- maj0r_pawnage
- Legit Extremist
- Posts: 408
- Joined: Sat Feb 17, 2007 7:16 pm
- Location: Toronto Ontario
What memory should i buy o.O
http://canadacomputers.com/index.php?do ... id=RAM.835
http://canadacomputers.com/index.php?do ... id=RAM.812
http://canadacomputers.com/index.php?do ... id=RAM.812
any other suggestions for a 2gb kit under 300CAD would be nice :D
http://canadacomputers.com/index.php?do ... id=RAM.812
http://canadacomputers.com/index.php?do ... id=RAM.812
any other suggestions for a 2gb kit under 300CAD would be nice :D
Last edited by maj0r_pawnage on Sun May 27, 2007 11:08 am, edited 2 times in total.
E6300 @ 3.51GHz 1.392v
Asus Maximus Formula
Antec 550Watt Psu
Mushkin DDR-1206@ 5-5-5-15 / 2.28v
Zalman CPU Cooler CNPS7700
6408800GTS(OC 691MHz Core/2.132GHz Mem)
2x80mm case fans +2x120mm case fans
Asus Maximus Formula
Antec 550Watt Psu
Mushkin DDR-1206@ 5-5-5-15 / 2.28v
Zalman CPU Cooler CNPS7700
6408800GTS(OC 691MHz Core/2.132GHz Mem)
2x80mm case fans +2x120mm case fans
- maj0r_pawnage
- Legit Extremist
- Posts: 408
- Joined: Sat Feb 17, 2007 7:16 pm
- Location: Toronto Ontario
- maj0r_pawnage
- Legit Extremist
- Posts: 408
- Joined: Sat Feb 17, 2007 7:16 pm
- Location: Toronto Ontario
- kenc51
- Legit Extremist
- Posts: 5167
- Joined: Thu Jun 23, 2005 1:56 pm
- Location: Dublin, Republic of Ireland
- Contact:
The 975X board doesn't do much over 400MHz... on average, so if your running 1:1 then the ram will be somewhere between 800 and 900MHz.maj0r_pawnage wrote:interesting, how so?
Most, if not all PC6400 kits can do that!
If you got the PC1066 kit, your board would have to run a FSB of over 500MHz and the 975X chipset can't do that without a few voltage mods.
Don't bother running anything else than 1:1 with a lower end C2D as your need some very fast ram and the performance increase is negligible...
- maj0r_pawnage
- Legit Extremist
- Posts: 408
- Joined: Sat Feb 17, 2007 7:16 pm
- Location: Toronto Ontario
so the new ram wont get me more than 140mhz? i had it running at 400fsb with my 5400 kit so shouldnt i be able to get atleast 3GHz with the dominators?
E6300 @ 3.51GHz 1.392v
Asus Maximus Formula
Antec 550Watt Psu
Mushkin DDR-1206@ 5-5-5-15 / 2.28v
Zalman CPU Cooler CNPS7700
6408800GTS(OC 691MHz Core/2.132GHz Mem)
2x80mm case fans +2x120mm case fans
Asus Maximus Formula
Antec 550Watt Psu
Mushkin DDR-1206@ 5-5-5-15 / 2.28v
Zalman CPU Cooler CNPS7700
6408800GTS(OC 691MHz Core/2.132GHz Mem)
2x80mm case fans +2x120mm case fans
- maj0r_pawnage
- Legit Extremist
- Posts: 408
- Joined: Sat Feb 17, 2007 7:16 pm
- Location: Toronto Ontario
- JohntechUPi
- Legit Aficionado
- Posts: 93
- Joined: Wed May 23, 2007 12:24 pm
- Location: California USA /Manila Philippines
- Contact: