Information SPD EEPROM (A0) :
Manufacturer : Samsung
Part Number : M3 78T2953EZ3-CF7
Serial Number : 8130726F
Type : DDR2-SDRAM PC2-6400 (399 MHz) - [DDR2-800]
Format : Regular UDIMM (133.35 x 3)
Size : 1024 MB (2 ranks, 4 banks)
Module Buffered : No
Module Registered : No
Module SLi Ready (EPP) : No
Width : 64-bit
Error Correction Capability : No
Refresh : Reduced (.5x)7.8 µs, Self Refresh
Voltage : SSTL 1.8v
Prefetch Buffer : 4-bit
Manufacture : Week 47 of 2007
Supported Frequencies : 333 MHz, 400 MHz
CAS Latency (tCL) : 4 clocks @333 MHz, 5 clocks @400 MHz
RAS to CAS (tRCD) : 5 clocks @333 MHz, 6 clocks @400 MHz
RAS Precharge (tRP) : 5 clocks @333 MHz, 6 clocks @400 MHz
Cycle Time (tRAS) : 15 clocks @333 MHz, 18 clocks @400 MHz
Min TRC : 20 clocks @333 MHz, 24 clocks @400 MHz
Copy and Pasted the info from PC Wizard 2008.
But I really have no idea what all the numbers mean, stuff like 'Supported Frequencies" how can you tell which one its using? And stuff like 4 clocks, 5 clocks etc are greek to me.
I just plugged the three sticks in and didn't even attempt to mess with BIOS or anything. Did I do it right?
Thanks for any help you can give.
Okies, just found this info off of CPU-Z:
DRAM Frequency: 384.1Mhz
FSB: DRAM: CPU/6
CAS# Latency (CL) 6.0 clocks
RAS# to CAS# Delay(tRCD) 6 clocks
RAS# Precharge (tRP) 6 clocks
Cycle Time (tRAS) 18 clocks
Bank Cycle Time (tRC) 25 clocks
Command Rate (CR) 2T
Hope someone can figure out what all this means
